 |
|
|
Facilities > Printing >
MacOS X 10.4 Network Printing
In order to print to an CUIT printer from your residence hall room, you will need to have OS X configured to use DHCP.
For instructions on double-sided printing from OS X, click Double Sided
Adding a Printer
- Log on to your machine as you usually would.
- Open Printer Setup Utility from Applications/Utilities on your hard drive.
- From the Printer & Fax Dialog Box dialog click +.
- Select Line Printer Daemon - LPD.
- Enter the Printer's Address. A listing of available printers can be found here.
- Make sure not to leave Queue Name blank and enter public for the queue name.
- Select the printer model. A listing of the printer models is here.
- Click Add.
Printing Your File
Once you have configured a printer you must still choose it as your file's destination when printing. Any files you print will be sent to the printer you choose under an application's Print Setup, which is normally found under the File drop down menu.
- Open the file that you plan to print.
- Select Print... from the File menu.
- Pick the printer you wish to print to from the drop down printer
name menu.
- Once the print dialog box disappears, you may go to the NINJa printer station and pick up your document.
Printing Your File Double Sided
- To print your file double sided, select the desired printer. Then click on
the Copies and Pages drop down menu and select the Layout option, as illustrated.
- The Layout properties box opens. Choose the appropriate setting for the Two-Sided option and print.
Long-edged binding is the preferred choice for most documents.
- Once the print dialog box disappears, you may go to the NINJa printer station and pick up your document.
If You Also Have a Local Printer...
If you also have a local printer connected to your PC, you may switch between the local printer and the NINJa printer at any time simply by changing the printer setting under the application's Print Setup dialog usually found under the File drop down menu.
|
|
|
 |
