Lab 200BC Hitachi Projector Remote Control

STANDBY/ON Button

 Turns projector on and off. Point at screen or projector, with lights low. When light underneath projector is orange, it is in standby mode. ON button will start warm-up and turn light to green. Pressing ON button twice in succession will turn lamp off and start cooling process (signalled by blinking orange light).
BLANK Blanks the image (or turns blanked image back on)
LASER Operates laser pointer
VIDEO Selects the video input. Normally we don't change this. (see p.13)
RGB Selects the input signal. RGB02 is what we use with podium Mac.
MOUSE PAD (circle) Enables the mouse control functions (not all of which work with a Mac)
AUTO For Auto Adjustment of RGB and Video Input. We don't fiddle with this. (see p. 13 for more info)
MOUSE/RIGHT Button use with Mac?
MENU SELECT and LEFT/MOUSE There are several menus that should only be operated by Peter or someone else with expertise. See pp. 12-15 of user manual.
KEYSTONE Used in initial setup of projector to correct for keystoning; we don't adjust
< > ^ v buttons Use together with POSITION button to move MAGNIFIED image around. Can also use as mouse control if function has been activated.
POSITION Use with arrow keys to move image.
RESET Use with POSITION to reset to original position
FREEZE Freezes (or unfreezes) the image. Don't leave frozen image on screen too long or burn in will occur.
MAGNIFY + - Enlarge (or shrink) image
MUTE Turns off sound, or turns on previously muted sound.
VOLUME Adjusts sound volume