@ UVS]sS{t u9wtt T8t8/u H T@8uEEt5tV3C,Pٟ/usr/libexec/ld.soCouldn't open . Failure reading ld.so Bad magic: ld.so Cannot map ld.so (text) Cannot map ld.so (data) Cannot map ld.so (bss) ld.so failed: UDVSjjhj3Eu?jhjjjhjj jhjjjjj URujwjhjjjjUf t$f}tjhjjjjEEЁ t4t†f t ʉ QRjujjujhE܃$ujhjjjjU= t!=tҁ tuKMEЁ t*t†f t ,M= t=t tY 1QRjujjuċUURh($ujhjjjjUȅtIjjjuhjRUUURh$ujhjjjjEtUETUEEu܃ ]Sj֣UuuSj֣ =uyj h4jj,t@R ҉Åt5jhAjj؃;t @8u)RSjjjhDjjjj=~r腛e[^U塄t u u1U塄t u@ÐUU u1Ð= Ru@uRu@Service unavailableU塄t@ ÐbYXQQrø1 Jan 20007.0.196C-KermitWeb http://www.columbia.edu/kermit/ or http://www.kermit-project.org/.fax +1 (212) 663 8202 or +1 (212) 662 6442, email kermit@columbia.edu,612 West 115th Street, New York NY 10025-7799, USA; phone +1 (212) 854 3703,For further information, contact the Kermit Project, Columbia University,of use set forth above are breached.New York reserve the right to revoke this permission if any of the termsC-Kermit software. The Trustees of Columbia University in the City ofremoved, altered, or obscured and shall be included in all copies of theThe above copyright notice, permissions notice, and disclaimer may not be ATTORNEYS' FEES) ARISING OUT OF YOUR USE OF THIS SOFTWARE. AND ALL CLAIMS, DEMANDS, LOSS, DAMAGE OR EXPENSE (INCLUDING THE CITY OF NEW YORK, ITS EMPLOYEES AND AGENTS FROM AND AGAINST ANY INDEMNIFY AND HOLD HARMLESS THE TRUSTEES OF COLUMBIA UNIVERSITY IN HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU SHALL IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, THE TRUSTEES OF COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK SHALL NOT WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK OF ANY KIND, EITHER FITNESS FOR ANY PURPOSE, AND WITHOUT WARRANTY BY THE TRUSTEES OF TRUSTEES OF COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK AS TO ITS THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THEDISCLAIMER:prior written permission.products derived from or including the C-Kermit software without specificThe name of Columbia University may not be used to endorse or promote Kermit Project, Columbia University; contact kermit@columbia.edu. or clients except as in Clause (A), requires a license from the by any commercial enterprise to its actual or potential customers or with any product not covered by Clause (A), or its distribution(B) Inclusion of C-Kermit software in whole or in part, in any form, in simply a matter of keeping a consistent and supportable code base). Kermit Project, which will not be unreasonably withheld (this is C-Kermit source code may not be changed without the consent of the an Open Source operating system with accompanying utilities. The computer, as long as the primary character of the distribution is Web site, or preinstalled software on a new GENERAL-PURPOSE distributions include, but are not limited to, CD-ROM, FTP site, operating systems) are included in the same distribution. Such approved licenses, even if non-Open-Source applications (but not SYSTEMS that have OSI (Open Source Initiative, www.opensource.org) included WITHOUT EXPLICIT LICENSE in distributions of OPERATING(A) The C-Kermit software, in source and/or binary form, may beConditions for REDISTRIBUTION are as follows:accessed by customers or clients, WITHOUT EXPLICIT LICENSE.INTERNAL DISTRIBUTION and use, including installation on servers that arehis or her OWN USE, and by any company or other organization for its ownProject or implicitly licensed by Clause (A) below) by any individual forColumbia University (or from any source explicitly licensed by the KermitThe C-Kermit software may be obtained directly from the Kermit Project atPERMISSIONS: All rights reserved. The Trustees of Columbia University in the City of New York.Copyright (C) 1985, 2000, Entering server mode. If your local Kermit software is menu driven, use the menus to send commands to the server. Otherwise, enter the escape sequence to return to your local Kermit prompt and issue commands from there. Use SEND and GET for file transfer. Use REMOTE HELP for a list of other available services. Use BYE or FINISH to end server mode. /etc/iksd.confOtherZMODEMYMODEM-gYMODEMXMODEM-CRCXMODEMKermitU1autokeepdtr/ctsxxx2xxx1stringetx/ackdtr/cdrts/ctsxon/xoffnonepipesshnamed-pipenetbioslatdecnetx.25tcp/ipmodemdirect-serialremoteOS/2UOWindows-32UNOS-9UDMS-DOSU8UNIXApollo AegisN3Stratus VOSMVAmigaL3Atari STK2MVS/ROSCOEI9CICSI7MUSICI4MVS/TSOI2VM/CMSI1AOS/VSF3RT11DBRSTS/EDAVMSD7MacintoshA3Apple IIA1anonymous0UWVS}u<419L~(W4ztC9Lډe[^_UVSuu2119L~"V40tC9Le[^isabsoluteisabsolute rcUWVS]1t;u1E0HPSh'j< ;/t;~uVhh'ji< e[^_U=u utÐinitflowU PhhK(j; initproto spsizinitproto spsizrUWVSU] u}t;u1ۅt>u1}tM9uE}tM9uE} tM 9uE }$tM$9uE$t?u1L|~ DLL| ~ D LL|~KDPhh(jr: =t$Phh(jE: LL|~ D LL|~ DPLL|~ D`LL|~ DLL| ~ D LL|$~ D$SLL,P!VLL0P!WLL4P!uLL8P! uLL<P!u LL@Pi!u$LLDPK!e[^_*/.*.**READ.ME*read.me*.TXT*.sed*.spt*.sno*.awk*.perl*.sh*.lisp*.el*.java*.pas*.s*.F*.f*.f77*.for*.hqx*.hex[Mm]akefile*.nr*.tex*.mss*.htm*.html*.upd*.bwr*.ksc*.cpp*.w*.r*.h*.c*.txt[wk]ermit*.lhz*.lzh*.xl**.vxd*.doc*.dll*.BMP*.bz2*.bmp*.rpm*.class*.so.**.pdf*.tiff*.tif*.jpeg*.jpg*.exe*.out*.a*.so*.o*.zip*.tar*.gif*.tgz*.Z*.gzUS1ېTXC~1ې4\TPx<\t C~14\XPL<\t C~֋]U=u hѭ=@t"@jH跒}Wikslogin clienthost Internet Kermit Service ready at %s%s C-Kermit ready at %s%s %s MAIN clienthostlogin loopMAIN LOGIN tryTELOPT_SB(TELOPT_KERMIT).kermit.me_startMAIN LOGINIKSD starting in server modeIKSD starting with Username promptAccess denied. Login TimeoutUS=*u ==tN5w|dH蟒jPh_.jW4 EP֥=t5uhs.5uh.虹 =l'thl'h.~h.q=j5h.j3 |01ۃ9h.Shh.j~3  Ph.h/j[3 $=t7jhh/j<3 x袠=unVjhh;/j3 jjjh  =t[=uh^/HC9~ =|05hh/j2 =u)=t hn/?4hjjq/  =t2PT]U=@t ji} inserverdotakeinisstelnetmain executing init filemain exits init fileU 5h2h2ju1 5*h2h2j^1 r 5<hh2j?1 =<~j40 t薞5<hh2j1 Interrupt during initialization or command-line processing.C-Kermit quitting...U=uh3h3jj- cl_commandsU= tT5 h 4(R ~4jjPV =T~j7/ t虝ܐJ j/ tsckcmai got interruptU  jhh4j/ main cmdfil\%0Ujhh4j/ hh4SQ hI =<~jj. t̜ܐU=uh3袦h3蘦jj4, setprefixUS]PLLShhv5j. t%1ҐfUB~fUB~f~=tOf.f:f6fffEfE(fEfEff.=f:f6f:f6ffUB~fUB~fEfE=J tJfEfEf.f.ffff(f(f>f>=t=Pt =t$f:f6f:f6=Pff4ff2f0fFfDfHfHfPfNfLf4f.ffPfNfLf]%s %s-., Kermit versionUWSpxt|=0щKщOD;~h5w|5x5h85xw\ 9tF0҉ψщOD=,h85,w55w\=d0щO~{D;rhh#5v5d5v\=h0щO~1D;(h85v5h5v\0=lЍx~-D;$h85Lv5l5;vtP|{j5h8j) e[_telnetrloginiksdhowcalledmain cmdini() doneMAIN feolmain: no memory for keymapmain: no memory for macrotabCan't initialize!ckcmai mynamerx %ssx -a %ssx %src %srbsb -a %ssb %srzsz -a %ssz %skermit -xkermit -rkermit -ir{{./.readme}{README.TXT}{READ.ME}}Can't allocate i/o buffers!main ckhostCan't open device: /dev/ttyCan't allocate packet buffers!main about to call ttopen() inservercan't initialize i/oMAINmain SO_OOBINLINEmain argc after prescan()main about to cc_executemain 2 cfilefmain argcmain zstatemain setting interrupt trapUVSu] 55 `EP3uh(jjh:5x u jjh:5Su jjh:5.u 55h:j& f|ͫ=|u\`jhh:j& jͼPhh:j& $hfrGu h:, hCru h: 1ҡGB~0}h ;  55h;j% =tY1  -~&=~=~(,\h-;h-;h3;h<;jh-;h-;j hB;hB;h3;h<;jhB;hB;j hH;hH;hK;hT;jhH;hH;j hH;hH;hK;hT;jhH;hH;jo hZ;hZ;h];hf;jhZ;hZ;jE jjjjhl;hv;h;j$ W1h;hܶ@ jh5ܶ }} h; 踔PVphhl' jhl'h;j $ =5h| p1=Hu5xp=t[jjhh|7}Ah;Fh| ;|; |;|R 1nDhlhlU} h; 5P"=*u =Elhh* =t. =<~j! =<jh {nf&f|jhh<jD" j5hh|a6(} h7< *jh2hL<j! **V EjEPhhjm$PhhQ<j! 5p*n5d*5`*g5\*p 5h*i5l*^lVhhc<jL! m m (R'jhh}<j !  h3h2hܟ5hh<j =t hH5h4h蠟  Vhh<j hDr %Phh<ji =<t"jb|}q<=t5=tPl h2h.h؞ =<u=@u =t=4u5\j ==<u =@t"=0t|}5\j =4tV=u"=Tt@u5\jw =4t"=t{}5\jL = u9 jhh<j  h4h4hĝu͸e[^zoutbuffer mallocgetiobs okUhju5jX5hhEju =XtjhhEjV 1ÐC-Kermit library, 7.0.009, 29 Nov 1999USRSGSFSESCSUBEMCANETBSYNNAKDC4DC3DC2DC1DLESISOCRFFVTLFHTBSBELACKENQEOTETXSTXSOHNULNBSAPCPMOSCSTCSISCISOSEPASPAMWCCHSTSPU2PU1DCSSS3SS2RIPLUPLDVTSHTJHTSESASSANELINDNBHBPHXXXUVSu] E~tut1&1Ҁ;tH9} 2B<u2Ѝe[^DELSHYUU hÃuGÍB w ÐtøGUUuH:u1ÊB:u%UEU u 1Ð8t@8u18uUVS]1uV1Yv RKh D4%t&v RKh4CF;ue[^U WVSE1Ʌ}AE 0T+tKtKD+-5lT+BNt BAu=~e[^_UuaU WVSuEE}} 0ҋ}щHE} ҍJ}}U}+]uV9]uI} }1+E9n+]uuWGut F9~LETAC;+u}~+u~!uuE Pu4tKy1e[^_UWUu H':{u0Ѓ<}uBЋ}makelist smakelist elementmakelist last elementUWVS]EEjShJjg uU 0ЍpuM FPeEtSue]S0Ѓ;{tBPdEZSudU :t 2eUM /E11;9};\uE;{u}uE}u|C]]뼐;}us}umMu`CWuhJj0 M <t 4dFVdU tVuPG C; t]KFCDECF5M9tL9}~GU <t 4d^ScM tSuPWWuhJj{ }tuce[^_...MAKESTR MALLOC FAILURE UWVS] U9u:t2cU0Ѝx|aPbƃtSVbH~jSEP&MEE jSEPx jSh*Mj 1U:t2bU2e[^_UE t PuUWVSM} ]1t\tX~T9tP)y9}Sbt319} : B9|t19} 2B9|tQObe[^_UWVS} u0}uEHuHM9u1? ?M MEGu1tу}UvRa D4%t'Uv Ra 4EӁvR4a D4%t&Ӂv R3a48] N1e[^_UWVS}u EuHuHMGFUv R}` D4%t'Uv R~` 4EӁvR0` D4%t&Ӂv R/`48]u E=Ee[^_ckmatch stringckmatch patternckmatch skipU8WVSDž]M}uEH}?q} uE Hju hPj  uuhQj u8M 9.u0}?.t(=,u?{t?[tjQhQj MM u(1*}}Ӂv R^ D4%t&Ӂv R^4v RU^ D4%t.v RS^4tDž8\u~DžEM}uLӁv R] D4%t&Ӂv R]48nE Ect ?B[=11Ƅ(@=~E}DžMt1}uLӁv R\ D4%t&Ӂv R\4Ã\t-t]]tKUX09}vMA}W]u0҄uЈ8w+Ƅ(8vDž Ƅ(E ({o1MAM?t.9{u@?}uH~9uӅDžDž?t@0GH,} |} AMDž+}CSZ#SuDž t%Dž>&Dž>\uuDž>t >, Dž?CP Zt^Z@PZ uuu Qeà !Z~.uHPu ؅Xu~DžFY*s1ҋM9*u E}?*tMDž]9t7u%;?t,;*t'<v;{tt;/t C;u˃GWXƃWViWVhNGj ;*u ujj ujju VXÃVXDE M;u3xtM 9/tcE } ?uUM 9t!uuu S E } ?uߋM 9%8u EE 1[^_$@UWVS]} 1EEEEE;v RW D4%@tCՐ;-u E;+uCCXt t_=w1tEƒP$]k.uWEE?N=w1tEUƒP<$E] ؅u1+CA؃}te]Ee[^_U,WVSE}}}}EEEEEEEE+E9E}؋MME4uuH} tMME E}~/>t*0҉HM9} H uu]EuH}~0:t+0҉HM9}H UE}u}EEEEjR=t4]jV%t]EEE]EuujVRƒ}u |5,UڋEM} t E M +]UڋME } t ME EE+E9EIe[^_fileselectfileselect fdatefileselect safileselect sbfileselect snafileselect snbfileselect filesizefileselect minsiz skippingfileselect maxsiz skipping*.~[0-9]*~fileselect skipping backupfileselect xlist emptyfileselect xlistfileselect skippingfileselect selectingUWVS} uE H}uEH}uEH}uEHjuh\j U :uU:uU:u U:u"ƃuH0ЍXSVh\j7 U :tRVPRju h\GU:t RV)R|juh\ U:t RVR~juh\U:t RVQ}juh\}} ~`ulShHh\jd }~9]uuh\j} ~9] |u uh]je}$tfj5uh0]tJjuh;]3SjhV]j _SU,4hm]j juh~]j 1M1ۃ},t/9](~*U,<tj5u4#uC},ujuh]jl e[^_-10U WVSuE1E "E">+t>-uEF> t>0t>ӁvR5P T4t)ӁvRPƒ4ӈ< w Ӄ<w,Ӄ} ׃}|}F>qu,`K1E)`>32t v1uÊI߅u}t-IAe[^_UWVSu 1ۅ}0}Ѝp19EE}9F9~ D EF9~}D EC9E} }tЃ? @}D}tЃ? @}DЃ?DЃ?;9*9]~};؍e[^_UWVSE 1ۅu1Dž}0}ЍxG…}W@~ u|>=uH~ u|>=uH9E}{s19}^u2tDtЃ?wӃ% =~  u3CB9|9]~u3؍e[^_chknumUWVSu11jVhcj BЃ+t  t t -t t1!t< wFue[^_UUu1Ð=w1tB:uظÐ1evenoddmarkspacenoneinvalidUEmt,t6et7otst(ddÐidÐmdÐrdÐxdÐ}d%02ld:%02ld:%02ldUWVSEUËE<׉}~WQShdhxK e[^_UWVSuU ]uH0Ѝx9~WRVWK 9~)Pu7PGKe[^_UWVSu uH0ЍX9]}]E)PuuJEE)SVPJe[^_UWVS]u ~19}59u )0؃)у 07B9|˸)Ѝe[^_ULWVS}u EEEuH?t1?~?VW]SJD.߃ }G0t u} Ev SI D4%t$ځvSIà 4CЃ wCDE}4e؃ E?WEe[^_UNIX Communications support, 7.0.231, 31 Dec 1999 FreeBSD 2.0/dev/ttynoneUWSU] 08\uDH1e[_U|jh`JUjh`JULINESxttgwsiz LINESCOLUMNSxttgwsiz COLUMNSUVSh_hJjShehj tQSJƃ~BhthIjSh|hj t SI~5 1e[^U1ƀ`@=~ $(Uchars waitingle_inbufUS1ۡ 9$t$)Áy%)ShVihdij ؋]buffer is fullle_putcharUS] + $Ѕ}%)‰Ѓujhihijj 6$`$=$u $(1]le_putsUWVS} 1Wuh`j[ 9}UP;ƃC9|Vhhjh`jj e[^_le_putstrUWVS]10HPShj ;tPƃC;tte[^_UM1ҡ 9$tK` ƀ` = u   9$u (Bttgwsiz TIOCGWINSZttgwsiz tt_rowsttgwsiz tt_colsttgwsiz TIOCGWINSZ 00US=EPhht@jEShhjhkj| |df}tJf}tCEUPhhjhkjB 5hhjhkj+ jhhjhkj ]***************SIGHUP receivedUjhhjhlj jhhjhlj jhhjhlj jj Ujj0D4jj "D@jjD8jjD<U54jC5@j C58jC5<jCsysinit calling priv_iniFatal: setuid failure. Fatal: setgid failure. Fatal: C-Kermit setuid to root! sysinit jchdlr: SIG_IGNsysinit jchdlr: SIG_DFLsysinit jchdlr: othersysinit ttyname(0)sysinit CTTNAMsysinit cttnamsysinit uname machinesysinit uname sysnamesysinit uname releasesysinit uname versionUSERsysinit uidbuf from USERLOGNAMEsysinit uidbuf from LOGNAMEsysinit uidbuf from whoami()sysinit final uidbufJOBACCTPRINTERDISPLAYUNIXLOCATIONsysinit startupdirUWSjhhjhqmj }rÃtLthmhdythmhdxthmhdxj@jj[AhljOAjjFADu!Hjhhjhmjp G=DujhhjhmjP Hjhhjh nj1 H5Dj@jhJfjj@mjjjA1ۃ j @tj&j?tjj?t jAÃjSh!nj thShL =u.hA=uh5h jhgh4nj3 jhhCnj djMA`S4Aj EPhj Sh^j EPh$j EPh =tRjhhRnj jh^hhnj jhh~njl jhhnjY =hnd@jhhnj# uGhn>@jhhnj u!yjhhnj thSh jhh oj ho?Ãtj?Sh[ h"o?Ãtj?Sh8 h'o?Ãtj?Sh\ h/oh?Ãtj?Sh 7o;oh =Xt j 5X@=1ttopen telnetfdttopen entry modem ttyfd lclttopen MAXNAMLEN definedttopen BSD4 *NOT* definedttopen BSD42 *NOT* definedttopen MYREAD definedttopen ttnamettopen ttnmsvttopen netttopen got open network fdttopen PTY: nopushttopen PTYttopen pipe: nopushPipe errorFork errorwfdopen failurettopen net xttopen got open fdttopen fdflagttopen timottopen alarmmodemttopenttopen ttyfdttopen alarm returnttopen errnottopen EACCESS/dev/null%s is not a terminal device ttopen not a ttyttopen ttname=CTTNAMttopen ttname=cttnamttopen ttyname(ttyfd) xlocalttopen setting ttyfd = 0ttopen stdio redirectedttopen ttlock failsttopen reading lockfile pidLocked by process %d %dttopen lockpid%s %sttopen tcgetattr ttold.c_lflagttopen tcgetattr ttraw.c_lflagttopen tcgetattr tttvt.c_lflagttopen O_NDELAYttopen fcntl O_NDELAYttopen fcntl failure to unset O_NDELAYCan't unset O_NDELAYttopen xlocalttopen calling POSIX tcseattrttopen POSIX tcseattr failstcsetattrttopen calling carrctlttopen carrctl okttopen tcsetattrttopen ttspeedttopen *lclttopen lock fileUWVSu5`hhjhxtj uuhtj 5Lhhjhtj M 1hhjhtjj jhhjhtjT jhhjhtjA jhhjhtj+ jhhjhtj h =L~Rjuh uj jhhuj hhu8  5LHPT}M ىMQuh'ujO U=w1tBې:=`u =dtuu8LPuh2uj huh =`*=* *}=tjhhjhMu**Tjuh`uj3 uÃ~-huhM :T} =tjhhjhkuj h6uh6t huK5Xt t=55555555hu5}55r5j545Z5j545B5 u4j45%555huP5\uhuEnu j5\s3huh)M M LP uu uLà ~huh M Shhjhuj U=w1tBې:u4LPuhujb huh=LuM M M hPhjz2`1j1 tj1uShhjhujz M M VhhjhujK h,hj10V2Phhjhuj h`Q2 tuLkeuhuhuj 5Lhhjhuj 5hhjhvj uL5Luhuji =L5hhjhvjB =~=u uj5`j0= ujuh(vj =5L/uvu7v tbuhAvhdg5uh^vj 5L0LH 5`j0@=`%huh M 9ug ujuhovhu /ujuhvd=tc5L0Ãuhj;t%hhS0 % 5ShvjO =uQ=u.jhhjhvj' 5Lx/L5Lhhjhvj x=-uÃSuhvj 5L/LH5`j6.=`%jh hvjW h Ã~3ShwfSh-whhL-jhhh0wj D= t8h,Ãt%h 5h?wS-SS3-xM 9th5L-5hhjhEwjx h5L- 5hhjhdwjN h5L-5hhjhwj' (jhhjhwj jj5L-jhhjhwj jj5L-$Pj5L-(} jhhjhwj hw]f5hhjhxj =t jhhjhxj^ hj5L,} jhhjh0xj2 hLxe=jhhjhVxj =%Ph2Zjhhjhmxj %%hj5L+$Phhjhxj b)Phhjhxjw 5Lhhjhuj` M 1hhjhxjG 5xh hxj0 5`j*=`%1e[^_U=tPu]closeresethangupsetupttclos ttyfdttclos netconnttclos xlocalttclos closing netttclos ttyfd after netclosttclos about to call ttunlckWarning, problem releasing lock ttclos setting O_NDELAYWarning - Can't set O_NDELAYttclos fcntl failure to set O_NDELAYttclos alarmttclos ALARM TRAP errnottclos() timeout: %s ttclos Attclos calling tthang()ttclos tthang()ttclos Bttclos calling ttres()ttclos ttres()ttclos Cttclos calling closettclos close()ttclos D?WARNING - close failed: %s errno = %d ttclos failedttclos doneUS5Lhhjh†j 5hhjhφj 5hhjhކjq =L==t qjhq0=P=X~u5\(5Q(j5X(]Sz'9XttE}uאXHL=Tt?覺5L'HTLc=t;jhhjhj M5Lhhjhj=t1jhhjhj sth7hd]=L~fjhhjhYj jj5L{' Pj5Lk'E(=t%u hq `jhhjhj> E=/h@hj%0j%Phhjhj h`-& tAE55覽Phj 4h؇ ^5hhjhj =Bj?%uhhjhjO ZEPhhjhj5 $5hhjhj =Buhhjh(j j$EPhhjh?j $5hhjhNj =RuhhjhWj jW$5L$EPhhjhlj[ (5hhjh{jA W}}Ehh\=t*5h\5hhjhj LHjhhjhj 1]tthang POSIX styletthang tcgetattrtthang cfgetospeedtthang cfgetispeedtthang cfsetospeedtthang cfsetispeedtthang tcsetattr B0tthang cfsetospeed prevtthang cfsetispeed prevtthang tcsetattr restoreUWVS=L| =1B=Pt j$=Tt j=t.I}jhhjhȍjq h45L"S5/PhۍjC (h4"V5Phj h4"W5ԹPhj (jh4"S5觹Phj jh4H"S5rPh%j h4j5L!S57Ph8jK hCVh4!à S5PhLj Wh4!S5ŸPhdj (|>h4j5L!S5莸Ph|j | e[^_ttres BSD44ORPOSIXttres resultttres errnottres return codeUS=L} =u=t1=Pu=Tujhhjhj hj5L) Shhjhj ,}5hhjh!j Shhjh-j ؋]ttchkpid lock pidttchkpid my pidttchkpid kill errnottchkpid pid testremoving stale lockRemoving stale lock %s (pid %d terminated) ttchkpid unlinkUWVS}WyƃVhhjh j bShhjhj 9u&jV5hhjh-jW ShhjhAjB }n=ueVWhSj$ =uVWhgV NWKOSWhj ~1=uWWe[^_ttrpidttrpid zchkittrpid fdttrpid string readttrpid integer readttrpid short readttrpid pidU(WVSujVhȓjA tb>t] NVrwNShhjhϓj |2-MjVENWhhjhܓj  E~DS]SWVShj EEPh-wEPp nt7uZjEPWVhhjh jR ~2UډU0jEPWpVhhjhj EWguhhjhj E܍e[^_/var/spool/lockttlock readlinkttlock linkttlock linkdevLCK..%s%s/%sttlock link symlockttlock lock2ttlock lock2 cleared%s/LTMP.%05dttlock flfnamttlock tmpnamttlock creat failedUUCP not installed or Kermit misconfigured %10d ttlock hdb pid stringttlock found tty lockedU,WVSu `j/Vt@EPV\MhhV-SVhjA ~ ƃ1Whhj t3j/hqtPjRhȕj hו`Pƅ, t5hו,P `Phhߕh W,Shjt tg,t^Shhߕhsjhhj< h h^ujhhjhj hhSjh h(j jSh6j Ih$Sƃ5ShDj =uh;RhXP%=u hRPI!+IPjhhjhj kIh]Sj SV;Shj (V/h$P1ۃ =uxCph P_%t!tE=t=T1=tjhhjhj=t395u+9u#9ujhhjh7j=t'5LD ujhhjh[jjhhjhj =tH P1t =t=u=tPh8u, hjj$jhhjhu(%hjjjhhjhj u3%% jhhjhˤj ;Cvu-%hjSjhhjhjɼ %w ===u jhhjhP!=u %jhhjhajR  mtG et`otst2R%jhhjh$  jhhjh jhhjh0j  %%% K% ()hj5L |.5jhhjhMj] 1e[^ttsspd cpsttsspd ttyfdttsspd xlocalttsspd okttsspd sttsspd failsttsspd tcgetattrttsspd tcsetattrUWVS]EShhjh<j迺 5LhhjhGj診 5hhjhTj莺 =L|$=t=u=Pu =Tt 1`P11q;B$# + .<O,/x73\Nx* g G@ -Z12Kn,X|t` ldKW P%H@8@K8p0( ,Euhhjhbj Vhhjhlj }ujhhjhujǷ uh45LShhjhj薷 Vh4,Wh4VhWh VhWhVhWh h4j5LoShhjhj |e[^_congspdUWVS5LLWhhjhj襶 5Le[^_U1@?~2Kn, X`  %$@8(K,p048,<@ttgspd ttyfdttgspd cfgetospeed 1 POSIXttgspd cfgetospeed 2 BSDORPOSIXttgspd codettgspd speedUS=uf=Pu]=TuT5Lhhjhj =L}h`|ShhjhShhjh j莴 Shhjh@jy H22K n,$uXWKB` ' %,12Kn~v,nXf^V` NF >%6K.&,ShhjhLjm ؋]US1ۃ=|C7Å ؋]ttpushback nttpushback my_countUS] ShhjhOj =uBC=w85hhjh\jұ =~ACPu E5h5 Suh1]mygetbuf IMPROPERLY CALLED with my_countmygetbuf readmygetbuf errnomygetbuf TCP errormygetbuf SERIAL errorUS=t#=~#5hhjh(j蹰 = =t5hhjhQj胰 5hhjh_jG =tD=*u2=t)=tp5hhjhnj jBP=u>=t5=t,=t#5hhjhjů j} ]SVORPOSIX myfillbuf calling read()SVORPOSIX myfillbufSVORPOSIX myfillbuf ttcarrSVORPOSIX myfillbuf errnoUS=Pt  Ljhhjhj hhSShhjhj ,5hhjh3j觮 5hhjhNj萮 ~]ttinl calling tn_doop()txttinl tn_doop() returnedu_start and !inserverme_start and serverUS]=t=t =*t=w=*jjhhjh jŭ h5PSh"h%j蝭 ,C  $<<,Tdt--j=ït3=$t*=u!p-jhhjh>jլ b=uU=$tLjhhjhTj觬 *-˸--j=t=ujj莩 1]ttflux my_countUS1ۃ=t=t =*t=u=*t5hhjh!j tJ=~K y5hhjhsj{ 5hhjhjd ,=tH=u?jhhjhj< jjjj jj^5hhjhj Sj%=tVjjs=t e[^connoiUjhhjh۽j莦 jj1jj jjjj in_chk entryin_chk ttyfdin_chk ttptyin_chk ttpushin_chk carrier lostin_chk close-on-disconnectin_chk FIONREAD return codein_chk FIONREAD countin_chk FIONREAD errnoin_chk my_countin_chk nin_chk resultUWVSu} E=tQWh-w]S~VSh-jL 5Lhhjh:j5 ,5ThhjhGj 5hhjhTj u=|EЩEEOtz=L} 8=t[=uR=tIx ~?u;Phhjhbj腤 =tjhhjhvjf j됐EPhf@Ww =tCPhhjhj% uhhjhj 5hhjhþj uE`5hhjhپjѣ uhhjhj轣 =~ Uuhhjhj蔣 E}1e[^_U=PtLPjttxin MYREADttxin myread returnsttxin xUWVS}11ۅ1;=|?U u~E @PGP@=(tG觧~E PLtCO~E PW_Whhjh+jn 9}b y g}"Shhjh8j( u  ًU F9|VhhjhMj ~M }e[^_ttol sttol dblflagttol doubledttol tryttol okttol write errorttol TCP errorttol partialUWVSu E=L} =tVuh荦 =Pt LU5Hhhjhj =HtL6@PEt8uM1ۀ>tUFACEPtACސUUVuhj蘠 u O)Phhjhja VuuÃ9u,Vhhjhj: }u}p5hhjhj =#to=t/=*u&5hhjhjП j }tuQShhjhj蚟 ])ރj }tuEe[^_ttoc timeoutttoc flowttoc errnoU EE=L}Ã=Pt  LUh,hj0jE }Eh` taDE~ P=uEPhhjh2j芞 =[jhhjh?jg CjEPu ~u1Ðu5hhjhIj ttinl maxttinl timottinl alarmttinl timoutttinl startttinl eolttinl unsavingttinl myread failure, nttinl myread errnocontinuingttinl EINTR myread iclosingttinl non-EINTR -3ttinl network myread failure^%c... Canceled... ttinl skippingttinl lengthttinl extended lengthttinl bad seqttinl EOP lengthttinl ittinl csavedttinl removedttinl got eolttinl senses parityttinl packet beforettinl packet after ttinl gotU WVSMMMMEEE=L} ?u hhjh{j uhhjhj }}}E}t.h,hjt0uPhhjhj詛 h`tjhhjhj肛 1EEPhhjhj] =tE= uE1EPhhjhjd=~% MQhhjhj   yE}=t.uhhjhj萚 5hhjhjy }uP=u~Shhjjhh!j= HjgC}2=%jhh4j Hoj }u^=t=t =*t=u:=*t1ulEu M}s=Lt}}PY=uh=t_E#9uNF95G}t=@%PhQm hZ^1}u3U#UE9tuhhjhhj讘 EM" } ;C}u.OɉMEQhhjhwiu}uMIɉMRuL}uF}GEMA%}|8}EWhhjhj u>MD %?v)PQhj跗 }t1}E@9}tE9E=UE9t~uhhjhjB Shhjhj0 =~euj9t"Phhjhj =3=PhhjhjEPhhjhj– M = =u|SEPQ ~ZPhhjhjx juhjg 1 9} }$8@9|juhj7   }t;Puh&j E H9gEe[^_ttpushttincchttinc le_getcharttinc error on ptyttinc myreadttinc restoring oldalarmU SE=L} TE=t=t =*t=u=*tE=|45hhj EE=(t/EPb~EPhhj詔 E}~ =~q y =Tt%}!ShhjhjO j舸E~ }#؅+ h,hj0uEh`>tZ y Shhjhj訓 ]|} }~=uU)U}}E}tuhhjhjK u=tu9~ }t ؅|#]ttsndb ttyfdsndbrk BSDBREAKCan't send BREAKBREAK stuck!!!US]5Lhhjhj藒 =L=Pu =Tt j:=t  C=wPEShhjhj1 EPht5LQjh{t 5L?(}h9Sjhzt 5L }hjj܎ ؋]UhUhttwait select errnottwait OKttwait select xU WVS]j juVك \U hjjVhƃ |<5hhjhj #tVhhjhj͐ %5hhjhj詐 1e[^_msleep SELECT 1msleep SELECT 2msleep BSD44 selectUS]ShhjhjO ~عP ~gShhjhj hhu|FhjjjjIPhhjh j軏 1]UjB,gtimerUSj)+,Shhjhjk ؅}1]Ujh}%fgftimer.A{Gzt?UPVSjEP]+}E+}ƃ}K@BHV<$S$]PUEu]؃=t#uuh=]SjSh@j螎 Ee[^ztime GFTIMER gettimeofdayUS]@<hh~<<@hP5<Phj ]congm getting modesUS=uju|=|~1|jhhjhj蝍 jhgÃ}1h`S|hS|hS|~S|]concb cgmfconcb backgrdconcb ttyfdconcb ttfdflgconcb isattyconcb suspendconcb cccbrk.c_flagconcb c_cc[VINTR]concb returnsUSUU5|hhjhVj茌 5hhjhaju =|=uk=|*5Lhhjhoj7 5hhjh{j jBShhjhj 5phhjhj =U5hhjhj見 %  %Phhjhjn  hjjShhjhj( 1]conbinUS]j2tw jhhjhkj %w %%hjj1]conres cgmfconres isatty okconres restoring tcsetattrU5|hhjhj. =|1ÐjAtFjhhjhj jhhjh$jމ h`jj!Ð1UEE=t=u%PgÐjEPjUEU =t=u PRPRjUWUuhj0H=t=u PR PRj_}UWVSuu f_1ېuhj:tG=t*=u!0щHPR=ƒ RJƒ|C몐1e[^_UWUE E Euhj=t0=u'0HPRjEPRjEPji}conchk contypU=uj!t5hhjhpjLJ =u =}1Ð=t=u5LjÐjjttinc LocalEchoInBufconinc(0) errnoconinc timeout logic errorconinc alarm setconinc(timo) nconinc(timo) errnoUS]==u*S`==t{=ur=|55hhj肆 EE=(t+EP~EPhh j5 ĐPjEPj[à t5hhjh j ==t=tjhhjh0j輅 h,hjT0SyShhjhKj苅 h` t jEPjà Shhjh\j? 5hhjhkj( u'=u=tu=~؋]ttscarrUEPhhjhj軄 carrctlUVSu] Shhjhj菄 t f N1e[^ttgmdm K_MDMCTL definedttgmdm TIOCMGET ioctlttgmdm errnottgmdm bitsUSjhhjhj =u=Pu =Tt =t/=L} =tEPhjt@5L EPhjt@jà Shhjh0j腃 }5hhjhFjg EuhhjhSjL 1E t@Et E@t }} Et Et ]suspendpsuspend errorpsuspend okU}ujj|jhhjhj轂 1Ðhrj 5hhjhzj藂 UjhN9u 9u =u =u U=t5t Ð=t/5t=t 5Ð1US1ۃ=t5t=t5t؋]setuid failedruideuidsetuidsetgid failedrgidegidsetgidUS1ۃ=tb5tP5hhjh$j Phhjh2jЀ Phhjh7j趀 5hhjh<j蜀 =t`5tN5hhjhCjg KPhhjhQjM )PhhjhVj3 5hhjh[j ؋]UVSu] SVF؍e[^UVS10ƅu9t 9uÅu9t 9un É؍e[^UUjJ=0t50j0Ðjj?Sorry, device is not open ttruncmd fail: nopushttruncmd systemttruncmd waitttruncmd wait statuspttruncmd wait pexitstatU WVS}=LuhK1W=tjhhjhgjx~ 12#0ƅuV-t j2j5Lj5LWSWh}j~ $%Pu1jjEjjE}WShhjhj} 9tuڋE}uuhhjhj} 5hhjhjr} ujujP}%e[^_UWVS]0u{ u { :u{:t 1uV} t V EPk4 CCЍ ȍTCHCЍDSDDCЍTC‰@C ЍTC ‰<C ЍTC ‰8CЍTC‰4LP4e[^_UWVSEM U=t= t=dt=tRQP3RQh}110}Ѝx1Ƀ 9}=u&t=uƂBƂBƂe t/ u:t=uƂB}5u!Ƃ t=uƂB}1CB9Ot=uƂBh Rjhe[^_UWSUE =u PR PRh}110}Ѝx1Ƀ 9}=u&t=uƂBƂBƂe t/ u:t=uƂB}5u!Ƃ t=uƂB}1CB9Ot=uƂBh Rjhe[_:%s%s %s U8 Phj8t7Ruh9UNIX File support, 7.0.156, 30 Dec 1999 FreeBSD 2.0rm -f cp mv pwd ls -l cat Maillpdf who /usr/adm/wtmpWTMP open failedWTMP write errorWTMP record OKUWVSu} =H=LuhhL`uu=Pu/jj 5LP }HjVhx|R5P~ufjV]SZjWURZURVj$S5P($t UMRQ5P%jVh jVhjmw p[^_cksyslog s1cksyslog s2cksyslog s3%s: %s %scksyslog errnoUWVS}u=}uEuu} u } tjuh&jv jWh2jv jVh>jv VWuhJS$5hhTjfv e[^_UjPxP2UShhu"v=t; w_C;u]/var/log/iksd.logdoiklog openxferlog open failure %s: %mdoiklog open errnoxferlog: %s open okU===u 8tzhh PZPhhj?u =};5hj5hhj u  =t=t5hj*zopeni namezopeni called with ZSYSFN, failing!Terminal input not allowedzopeni: attempts input from unredirected stdinrzopeni fopenzopeni fullnamefile[%d] %s: open failed (%m)file[%d] %s: open read okUVS]u SVhjs S-t 1_|ujVhjs 10uSj$7t)hhdjhhjWs 1hFVPVhHjs =u=~%=tVjhhUjr <u5=~=thShej hP14=~=thShj` e[^zopenozopeno fcb dispzopeno fcb typezopeno fcb charzopeno fcb is NULLzopeno fp[n]=stdoutwazopeno appendzopeno fullnamezopeno fopen argzopeno failed errnoappendcreatefile[%d] %s: %s failed (%m)zopeno zobufsizezopeno ZOFILE nonblockingzopeno ZOFILE unbufferedfile[%d] %s: %s okzopeno okUWVSu]1Vu h3jq tw9ƅ1<19}9}jEU C9|4Wju 袷e[^_zinfill kactiveZINFILL feofzinfill calling ttwaitzinfill ttwaitZINFILL freadZINFILL ferrorZINFILL errnoZINFILL count 0 EOF return -1ZINFILL count 0 not EOF return -2UVS==u{=uoƅ} 19}#j ¡C9|߉|{u  |{5hhjjf =t =u@ tjhhz ` =tW=tN1ۃ=<t;jhhjOf j@PShhj*f (5hj5胵|Phhje =|@ @tAjhhje 5hhje =#uf_@ tjhhjve 8jhhjYe { |{e[^UWVSu] Vǃ t;t=t=u w1Zu'0HPS@P 14S1u u 5e[^_ US]u S@|N=t=uvTujh@P胱94h藳u t u 4j1]USE]=t=u w%Su @P9uډЋ]%cUS]E E=t=uvYu jEP@P諰1҃t3,EPh4bu1@ @t1]zoutdump zoutcntzoutdump wrotezoutdump write errorzoutdump write returnsUVSX=t5hhojb ==t&=u= u5X=5V@P{à ~)=tShhj b )뫐=t)5hhja Shhja 1e[^chkfn out of rangeUE v!tPhhjza Ð<%/dev/nullSTATzgetfs readlink(lookup failed)zgetfs S_ISLNK needrlinkzgetfs readlink errnozgetfs readlink resultUhWVS]Dž0u޿* u10߀?~uW/Wǃu?uhWS~uV3Rƃu>uމ=u SWu$EPVƃu%h hdnE#SV9]~|/tKShh8j[ uhh@jZ }tM~ID>tMVqVu;0щ|/tKuǐD3.D>u fNfjVݩE}5VhP uVhejPZ V諦1҃}}Ѝe[^_zdeletzdelet fullnamefile[] %s: delete failed (%m)file[] %s: delete okUVSu=t VzÃjVhX jY =~W=tNhhVYjhh_ jsY } hho  hh j軧؍e[^Uhjju uanzrtol name.%snzrtol fullnamenzrtol sizing MAXNAMLENnzrtol sizingNONAMEnzrtol new nameUWVS]DžDžDž} ujSh] j}X ;~uSOu8tƅ޿* %}u,PShPPhuG}uhSP'?u#StShi PԣhSPf: EjShm j~W 1Džhhh} jVW tF8F~;t;/tC;u;/u1CG;uhPS9Sh jV }t tuPu ~9M 9 t; v Džu; vzvR蔢 D4%t 2v R_ D4%tC;M€8 w M 9v: vM 9u! f fA AM 9trv R艡 D4%t4vR腡ƒ48uju h jT [^_zstrip beforezstrip after tilde-strippingzstrip afterUWVS]1jShjzT u M hl;~uCjShjNT ڃ:t%:/u l1FG=B:uM ljhlhjT e[^_Uhjju u5nzltor name.././nzltor fullnamenzltor name2UWVS]uDžDž<L jShj[S ƅu)PShP5ijhS u琐jhS uːuPhSRhSP5 jShjR }uuSu ]5blDžM9tPшÃӁvRp D4%t(Ӂv R?4e~u-[#uXO*t?uX> u_3wX'.u_/uFG?9v .} =l.uX} GuhlW4ju hj*Q [^_zchdirzchdir 2zchdir 3UVSujVhijP u>ujVhpjP VXGÃu;ujShyjP S u;=t(=txP=tP 1e[^UjugHOMEUhTKuNzgtdir BSD44 CWDBLUhhhtjO hhl4uzxcmd fails: nopushzxcmdzxcmd outzxcmd pipe failure/bin/shzxcmd pidSHELLgetpwuid()zxcmd shpath-czxcmd fork failurezxcmd fcntl 1 pipe flagszxcmd fcntl 2 resultUWVSu} =t jhhjN VWhjN V8} 1ۃt tCSWhjN tMhWѝX<EPctjhhDt j5hhjM u=j6jh*Қ jujuuh觛Ãu9P[Sh hjSM tC 8u[ މڀ;tB.u*jVhRjG VwCSVh^jG $t-0ЍX~|/t3/3*DjVhmjG =u@=(t7=uh@PtPh5V' <=uh@th5V+ 1=t-=~ P2hyj5hhjF [^_nzxpandnzxpand xdironlynzxpand xfilonlynzxpand xmatchdotnzxpand xrecursivenzxpand xnobackupUWVSu] SVhj"F كЉ%tt߃=߃= $5hhjE 5hhjE 5hhjxE 5 hh'jaE 5$hh:jGE VM $e[^_U=tÐznextUS] ~h0Si' @PShjD @]Uznewn suffix removalznewn suffix removal 2znewnznewn max 1znewn max 2znewn namepartznewn len.~*~znewn A matches.~%d~znewn A new nameznewn B deltaznewn B matchesznewn B new nameU$WVSDžDžDžM }uE0}֍^9M|~^SQh j%C FPu 11҃~cttS<3~uGE<3~u.|.u'DMSQh3 jB 3< vKt0}HPuhJ j_B hhP jHB  Dž~ Džhh\ jB hhuAƃF0}Ӎ{Wvhh jA 6Vhhw jA 9  jh.Vhh jVA 0DPF9}Nʋ@Ph P jhh j@ +)Qhh j@ h訌)؋| / /j(Vh jO@ 1K*DP<9}NЃ~ uO@Ph PSh؋jhh j? $M A |t [^_zrename oldzrename new/zrename dirzrename no dirfile[] %s: rename to %s failed (%m)file[] %s: renamed to %s okUWVS1ۋ} juh%j> jWh%j> =t =uau a:E0ۋ} щN} ҋ}щMʉUReÃu u S_E |/th%SWEPuuS?jSh!%j> jWh-%j= Wu-ƃt=~k=tbhhu=hhW=thhh<%hhh`%jދtSɉe[^_zcopy src argzcopy dst argzcopy files identical: stat()source file not foundzcopy srczcopy dst 1zcopy files identical: strcmp()zcopy source is directoryzcopy dst 2zcopy open sourcezcopy open destzcopy final readzcopy errnofile[] %s: copy to %s failed (%m)file[] %s: copy to %s okUWVS]u 84Dž0j8h-'j; j4h;'j; =t=t EP8虉ujjhh4j; @P4muvjhh4jo; E9@uUE9DuJjhhI'j(jhh4j1; 58hg'j; hhS: t Dž8j8h}'j: hhV:t Dž4j4h'j: 48跆u jhh'ji: _85tj8h'j6: ,45teDž<04ЍX4|/tƃ/ƃÍu 1==8t+=t R=8tEPV EPV貄ƃj hh4j6 } ,U%=`tVw = tEw =tdr=@t)g=t=w =t,R=t1=t:@d>c6b.-&lspw?Ctr-C}w-C%@@t wt,=t=@t-xSsC tr-Ctw-C%t wt,=t=t-xSsCtr-Ctw-C%tr=t=t-xTtCjhh@-j4 e[^zsattr buf.st_mode & 0777zsattr lpermszsattr gpermsU1UdWVSuх}%)t } ЉFF=t*hN0҉ψщHF F FFFFF F$F(F,F0F4F8F<F@FDFHFLFPFTFXF\=tEPh=Ãj hh4jA3 fE%Phh/j3 fE%Ph,ht&0tHFPFTt1ۃEtC}}E@t pqFXF\pvPvTh/j2 vXv\h/j2 Fd/F`FhFlFpFtFx1e[^_zdtstr timearglocaltime returns nullzdtstr tm_yearzstrdt YEAR-2000 ALERT 1: localtime yearzdatstr year%04d%02d%02d %02d:%02d:%02dzdatstrUWSuhh@2j1 }|%UR!~ǃu jhhO2jq1 _Shhf2jO1 ~Shhu2j21 lShh2j1  w ww;w;v1Pwww G@PSh2h|0ЍX Shh2j0 ~ͩe[_zfcdatzfcdat lstatzfcdat statzfcdat stat failedzfcdat buffer.st_mtimeU`VSu;;~uS&Ãu;u58Sh3j/ =8tL= t =8t/EPS~j hh4j/ Vhh3-EPSn}j hh4ju/ Vhh 4jc/ (t5Sh4jI/ "uhh*4j,/ EPhe[^zstrdtBad creation date zstrdt date check 1zstrdt date check 2zstrdt date check 3zstrdt so far so goodzstrdt yearzstrdt fails - yearzstrdt 4 bad date zstrdt 6 bad date zstrdt 9 bad date zstrdt 12 bad date zstrdt 15 bad date zstrdt tmx 1zstrdt BSD44 tm_gmtoffzstrdt BSD44 tmx 3 (GMT)U(WVSu uho5j- } t} uEx u x :ux:tu uhv5u uh5j- 1UwÃ1ۅG~u uh5jB- GiMwÃ1ۅt(E\8wÃ1ۅuu uhv5~u uh5j, {jhh5j, E1 UT/G~]SzVSh5js, |Vhh5j^u uhv5Nu uh5>u uh6.u uh!6u uh46u uhH6j+ EudӅuӅuENE؍]O}R]؍عdËE)؉E؍ع]؉]]EEEUT:UMQDyƃ_ $p99P:9P:P::P:P:,:P:P:D:F (E}EFpuuHEEEE+EEGGvF;;vEGh;3uEPvuhh\6j* ^$Shhi6j) E)؉EPhh6j) Ee[^_zstimezstime datezstime: nothing to dozstime: zstrdt failszstime: tmzstime: A-pkt date ok zstime: Can't stat file:zstime lpermszstime gpermszstime system idzstime file perms beforezstime isguestzstime ckxpermszstime isguest sb.st_modezstime octal lpermzstime mask 1zstime mask 2zstime gprotectzstime S_IRUSRzstime S_IWUSRzstime S_IXUSRzstime mask xzstime mask x|maskzstime flagzstime S_IFMT x%04ozstime file perms afterzstime: sb.st_atimezstime setpermszstime DIRECTORY bit onzstime DIRECTORY bit offzstime chmodzstime 0: can't set modtime for filezstime 0: modtime set for filezstime 1: comparepacketUWVSDžtDžpDžljuh:j ' } w wh:j&  u'Pjhh:j& 1} w wl}jhh:j& Elhh;j}& } w wh ;jh& EPu=tt.jhh4j?& 5uh#;j*& jhh4j& DžpDžhDžd=tc} wPwTh<;j% wXw\hJ;j% jwdhX;j% EPh,xSqjShi;j% ,5hh;jm% 5@hh;jV% =tBf@fE%Phh;j)% DždDždq} P~`~wd/t } P}rDžd} OT_P}19}$<wh|ЉhAB9|hh,xSpjSh;jq$ 8d*} XjrVhh;j2$ PrVhh;j$ G\ۃ(Shh;j# jhh;j# t hjhh <j# ththjhh<j# t h@Dždhhh'<jQ# hhhh5<j4# dhhH<j# dt7hhhT<j" fEf%f hfEDžtEPhd<xSntShi<j" uhh<j" EEl},}t}#thh<jY" fEf%f=@u5EPhh<j2" fu@EPhh<j" tt"EPuoPhh<j! }pu 1EPupt5uh<ujuh=j! 1Duuh'=jz! lh9=h'=jc! l9}%X[^_mail %s < %sU=u$u uhHCh3mh1Ðzprint filezprint flagszprint printernamezprint printpipecat %s | %scat %s >> %s%s %s < %szprint commandUVSu] =t jShCjY jVhCjJ j5hCj3 5hhCj =t=t35ShC=t5ShChkSV5 hChkjhhCj hi1e[^echo%s %sUWVSu0ʋ=`Љ)19\~)M <t4kM C9\\W kEu V5`hDukuj1۾E=ؿtR |x{8{3ǃ< t< hjth=tt=ts0P!jǃt+hW%jM CF;/u>~;/t;tC;/u;/uC;B}t$uhpj5phFj? =t'1}tVWhFj FuEe[^_fgen patfgen current directoryfgen stathackfgen scratchfgen xpatslashfgen string spacefgen can't malloc string space fgen xpatfgen xpatlastfgen xpatabsolutefgenUWVS}uWhHj; j4PhHj' 5hhHj  x|W^ƃu-5hhhHj ?/t ./CWhl@jhhHjq 1ҡl8t8/uB@8utRhhHj< =duv=h2~RhPfd2hЉЅ}lj=h2=h2hHhd5lYx5l5p9|5x5lhIjh 5|5ph IjP ,5hhIj6 dM M ShV~tV\eރu5hh-Ij e[^_traverse add: end of path segmenttraverse entry sofartraverse entry xpattraverse entry xpatlasttraverse entry pl -> nparttraverse xpatslash absolutetraverse xpatslash relativetraverse xpatslash ckmatchtraverse add: recursive, match, && !isdirtraverse sofar 2traverse segisdirtraverse itswild traverse existstraverse not foundtraverse sofar 3traverse opening directorytraverse opendir()traverse opendir() failedtraverse skippingtraverse add: recursive && isdir && segisdir or matchtraverse mresult xpattraverse mresult pl -> nparttraverse mresult sofar segisdirtraverse mresult sofar itsadirtraverse mresult xmatchdottraverse mresult s1 kludgetraverse mresult depthtraverse mresult xpatslashtraverse mresult nambuftraverse mresult itswildtraverse mresult segisdirtraverse add: match && !itsadirUWVSDžjhh4jg }u"MAju hKjF ju== u=u=u =ttCh<u btfDf%f=@% Džjfjhu b %Th<u {btfDf%f=@% Džjhh4jS u hKj; =uCp8.u =u&l8.u@<v =t= u5t5lhKj 55phLj juh Lj = MMM 9/ujQh;LjT ]  u hLjo uhLjZ $= ~,t =u =xuu^0}ЋMDEPu _u6ju hLj M/AMQu MHju hLj 1Mju hMjq ju h!MjP ju hNjT = t=tu {/u;.t ~/u>.t򋍔t1>tB}Ah<SYtfDf%f=@1jhh4j =tt =ttVShDX{/u;.t y5ShSX60׉dh9v"5ShhXj dS5Vt|8/tD8/G=5ShXj e[^_LOGNAMEUS=t ϊhZpXt5hPSSXt@9u hShYtChPSSXt$@9uhPh 5Xth0he1tilde_expandUWVSuPVh[jN >~t VheU0ЍP19}<3/t3 C9|ƃ u=th _Ph Wǃu%hVh}hVhm:hVhXhwhF3PhT e[^_?Privilege cancellation failure shUVS=u TÅt$} ouVT9uEVˆth0\]hTjuh"hQ\hVhhh^Te[^z_exec commandz_exec arg 0z_exec arg 1z_exec tz_exec errnoUWVS}u ]jWh\j: j6h\j* jvh ]j Shh]j  t1=L~(j5LSj5LS5L!TmVWU}5hh!]j e[^_-iUWVS}=BSÅ;tj@RhvTÃu(踆P*UƒtB 8u Z މڀ;tBEPVRSVh_j$ u5hh_j 1ۃ= tJfEf%f=Shh_j thPVQ ~Shh`j EPhh`j ufEf%f=@%1[^_zmkdirzmkdir tilde_expandzmkdir tp after tilde_expansionzmkdir makingzmkdir failed, errnoU WVSE0}ӍsVuh-aj FPNEuuNU:~RÃu;tsjSh4aj] 0P;Nƃu.5hhvaj% uN>ulNuSuN juhHaj ];/;/=u=$u =t|=t(=u Pu#=t =bPU=t(=u Du#=t =$DUuu.juhhaj  huOƃEUC; u u1=t:5J5uJ5(jJ5,_J50TJ 3ss(s,s 0e[^_userzvuser ckxsyslogzvuser CKSYSLOG definedlogin: user %sftpanonymouszvuser anonymous ckxanon(unknown host)login: anonymous login not allowed: %szvuser anon forbidden by ftpusers filelogin: anonymous login forbidden by ftpusers file: %szvuser anon sgetpwnam(ftp) OKzvuser anon sgetpwnam(ftp) FAILEDlogin: anonymous getpwnam(ftp) failed: %szvuser sgetpwnam ok/usr/bin/bashzvuser shellzvuser getusershellzvuser endusershell 1zvuser endusershell 2zvuser checkuserzvuser refused 1login: invalid shell %s for %s %szvuser refused 2login: %s login forbidden by ftpusers file: %szvuser sgetpwnam NULLlogin: getpwnam(%s) failed: %sUWVS50uhfj }uE5hhfj jhh gj =0=t=tuh%gjH 48u4gtu8g |5<hhBgj! =<u5=>=1u[gPhjgh4gvuh8getJjhhgj ==u[gPhgh4g tRjhhgjK 488gulhjVhzhjd GDžtjWhhjF VWsDujhhhj% Fjhhhj uShhhj u_jhhhj ==u[gPuVhhjEtTjhh ijq ==u[gPuhi`8j@uhHjhhKij =t'=tu[gPuhaij6E1e[^_checkuser name/etc/ftpuserscheckuser userfilecheckuser linecheckuser REFUSEDcheckuser OKUWVS]u0HPShmj# ;u'jShnj hFumPDV5hmj thƅVhWHD t=jWhmj #vSWyC Zƅ뱐VCjShnjH 1[^_logoutWTMP logoutU=~%=t5hhMojj}50hThToj =0thhhTP|04iksdckermitzsyslog syslog openedU=tC=u:jjo=toPBjhhoj! xxxxxx(null)zvpasslogin: anonymous guests must specify a passwordxxzvpass deniediks_%04xWTMP loginzvpass anon chrootzvpass anon chroot FAILEDzvpass anon chdir FAILEDzvpass anon chroot/chdir OKzvpass non-guest chdir FAILEDzvpass non-guest chdir OKzvpass setuid FAILEDzvpass setuid OKGUEST fncact=Ranonymous:Anonymous login. login: anonymous %s %sUser %s logged in. login: %s %sUSER=%sLOGNAME=%sHOME=%szvpass guestzvpass zvunamezvpass guestpasszvpass dirzvpass homezvpass anonrootUWVS]=02=8%4Rtipt ppPhwpj u8=4t<;u.==h~pj?=4uw=u p @PS?ƒ=t@8tPRg=t,jhhpj +p =p 0h?0p =HtR}>PhphT< u[gP0hTx50hThpjw =uz=4=t5VhjVhpj! V>}5Vhpjh%`>}5VhqjhjVhqj V.>}jVh5qj:jVhSqj p<}!phhmqjh |phhqjG 0=4`jShqj j j hqh0 hSh:%hqOt==Su[gPhqh5hhh0D0hqs=t.=t%u[gP0hqj<h5hhhqh(:h^<hhrhL :(hL=<hh rh@9h@<j@hhl P;= =t}54hhrjY jhh!rjF jh0h0rj0 jVhArj! j5hLrj j5hXrj =4t0=4t % 0HjjP!Ph8j hSdPGjj5Phd8(=4tOÅu;ujj0HPPh\8j hSdP5U# 1e[^_C-Kermit functions, 7.0.187, 20 Dec 1999EnabledRemote onlyLocal onlyDisabledError receiving fileupdateaskdiscardappendbackupreplacerenameSERIOUS ERROR: encstr data == NULLencstrencstr memptr 1encstr spsizencstr getpkt rcencstr string too bigUWVS]=ujhyhWyj uy0ЍpVShzyjb UUShyhyj8  5hyhyj j52Whyhyj (~*9s5hyhyj Whyhyj UUe[^_UE1US]=(t9##=###=(t 裾u P>_1]putfilputfil zchout write error, setting czseenUS]Phyh{j "Pj |1"Hjhyh{js ]US]Phyh{jL "Pj蛄|1"Hjhyh{j ]UEPUU BDECODEbdecode write error - errnoUWVS]E =t=u= |t3jPS65hyh|jq jhyh|jQ 5N9u?=t6%  x1L9u;NڃBv?u@ۉڃ\ڃvu ud==t l  و9K1l=tA=0u83 31  =Og1e[^_%cUSU ] |u*9(荂uPh~jP҅|aLl=tG=u>=0u53 %31 ]xpnbyte RESETxpnbyte axpnbyte UTF-8 conversion errorxpnbyte haveucxpnbyte uc.x_short Axpnbyte feolxpnbyte uc.x_short Bxpnbyte bufxpnbyte ucxpnbyte sjxpnbyte euxpnbyte bad euxpnbyte impossible combinationxpnbyte BAD FALLTHRUUWVS]}E1EEu9E Eu1hLjhyhj 1 Shyhjj =Dv D=\t=Dt=\u=DtE} u{ڃ} u W(EPP迮uEffVPhyhj EffE} uJht t \h+\hh} B1htf|'ffpl؃߃]w+\hlpC\ƀhpl h=lt%+\Pf=pt %fFtf9PfffVhyhj Phyhj Phyhj =t0f= =tf= uf f Phyh j] }-up1ۃ=L=@W=DtPW=DtPir|}.E}tJW=DtP#,W=DtPEPP ƃVuh5jU 1ۃ9}WEPC9|}zrfffwl}t Wj?n=tWPTcWj DMWj 1=}.$=tS}t Wj?PЃ…}?WP}@MI<|PhyhAj PBf%PhyhLj $}t,}?}tb}'\tWP W+\PPf%PhyhWj> f=uWj?1ۡ\tWPfoCW+\PEQCIPff=uhhyhbj ]+\PhyhWjf \uuPttDXYT;XY(ZJ[TXTP>\TPt8uEXTY(TZJTTƀXTTXTPTPtuGXTTƀXTTƀX$TTƀXBTT\$XTT+\$XTP19T~#WXPC9TޡT1ۃ}tMW=DtPW=DtPWMPvW+EPYe[=tGM I1e[^_U=t Ð=ؿt |y[lÐ{{U塤uUSM=|.1-{$%9uB~]maxdata spsiz 1maxdata spsiz 2maxdata len 1maxdata len 2US5hyh:j =} Z5hyhJj Bw\\~=u\+l\~ShyhZjz } Shyhhj\ ؋]SERIOUS ERROR: bgetpkt data == NULLbgetpkt bufmaxbgetpkt timeout sizebgetpkt: input errorbgetpkt empty fileUWVS M1=t=u =t=%Pu=ujhyh3j| dKE=tPhyhWj= =mlt=t =ؿt |x{0{Wiƅu8+Phyhfj ~tu#jhyh{jT Djhyhj1 lM=t@= u73 %31   M'=u=u1=t?Et=~MAMC =t=u++==l9 lAl)Ѝ9 ~  E9ul l =ؿt |x{0{fƅ}1uM u]DQl=tA= u83 %31ȣM  MEE=tCM8Mu;=u2=]m=^uG  Mx^(=~(  M  xUEfUTF2XGNBYTE EOFXGNBYTE xXGNBYTE KANA SJxgnbyte zminchar 1[UNICODE][other]xgnbyte thischarxgnbyte uc eolxgnbyte xx rcxgnbyte xx ucxgnbyte UCS->EUC UCSxgnbyte UCS->EUC EUCxgnbyte UCS->EUC xlabuf[0]xgnbyte UCS->EUC xlacountxgnbyte UCS->EUC rcxgnbyte decoding errorxgnbyte xcxgnbyte ucs2_to_utf8 errorxgnbyte UTF8 buf[0]xgnbyte UTF8 xlabufxgnbyte UTF8 xlacountxgnbyte errorxgnbyte send CRLFxgnbyte send feolxgnbyte to UCS2 BExgnbyte to UCS2 LExgnbyte cxgnbyte xlaptrxgnbyte xlacountBAD BAD xgnbyte bad xlatypexgnbyte switch failureU,WVSEEE11EfE ~.Whyh=j ? =\E} -=lu fE=ؿt |x{8{_Ǿ~lL(=t= u WJ=ؿt u |x{8{^ǃlE+E=t= u W=lEPhyhSj f}ujhyhdf}u(jhyh~jo =\t=Dt=\u-=Dt$UEEUjhyhjhyhj EPhyh͚EffEE} .EfE=ؿt |x{8{]ǃ~pl=t= u W^ȍUR%PÃW}EShyhښj$ EEffEEPhyhj M I<|u=lu蹽ؽ/=ؿt |x{0{\ƅ}jhyhjr VhyhjV l=t= u V1} t$} } ~ `?w fE=ؿt |x{{K[Å=t= u Sl\L(E+\k|fufEfEEL߃]} u1=ؿtg& |x{{Z#Ål=t= u S\L(E+\EPhfEE} u 譻0=ؿt |x{{YÅml=t= u S3ˀf]Phyhj  fEEEPa fEEu`=ؿt  |x{8{CYǃ~lWhyh-j E}tufEfVJ}t@PhRjL }u#=\ EXF= u E}fEffv=t.ff9Eu EPhyhcj調 EtM}uGEPӉShyhrj{ }fE?f]EPhyhjR }!EPhyhj/ }uEPT fEԃEP7fE%Phyhj }t+=   \|(t@\(E+\Phyhja  E+\5hyhӛj9 Shyhj:EӃv)EtEPhyhjGEGuLM Ijؼ 9}6E;EPCP芡PhRj螼 C9|FPhyhfjr E1}t)jhyh|j, }tc= u.ƃ CƃCƃ CShyh!CShyhjǻ 1= t =Du2C񈋘CjPfPh0񈋘CCjP4PhjH KShyhԜj 5hyhޜj 5hyhj 5=ؿt ! |x{{;Sȃ=t %PЃ}t$?%}}u h?s}uEP@fE\|(t,E+\\D(/E+\5\hyhj豹 e[^_SERIOUS ERROR: getpkt data == NULLgetpkt first uflaggetpkt first rtgetpkt zkanji: input errorgetpkt zkanji: empty string/filegetpkt: empty stringgetpkt funcstrgetpkt xgnbytegetpkt zminchar Agetpkt zminchar Bgetpkt timeout sizegetpkt: input errorgetpkt empty filegetpkt 1st chargetpkt eof crc16getpkt eof ffcgetpkt nleftxgnbyte B zmincharxgnbyte C zminchargetpkt EOPgetpkt leftovergetpkt osizegetpkt eof/eotU$WVS ME=tE =ujhyhj買 . 5E=O,w 5hyhjU EPhyhj? =u=u lt5L5,膿=t2=u)%El} =,謵=tАPõÃ}Vu%jhyh*jV DfjhyhEj1 K]=:l='= EP=tKE}u%jhyhf=tSЉÅ}l]EPhyh{jC c} =uy=\u45L,4Shyhj =ؿt |x{{KMShyh:=ؿt |x{{MShyhjk u7+Phyhj< u#jhyhѫj Djhyhjճ ]=\u =t<l=tEPЈE=t= u St=tEPhyhjV =tr= uiS7^=uS=uJ=t.5hyhj 5lhyhj 1`5hyh'j =t7t=~BF =t=u+==tp=ugl9 l'l)Ѝ9 ~  l l} tZ=,uQ=tАPÃ}u`DT=uKlC=tu%=t+ЉÅ} ]  MA} tr=ui=\u$5L,4Ã=ؿt  |x{{CIShyh4:=ؿt |x{{IShyhGjc }-uM u D]  M=\t<l=tEPЈE=t= u SuEEEEE==ui=t=u=tNM8 tCM8Mu;=u2=]=^uG  Mx^(=~(  M  x===tzM8 uo=t7=Dt.=|txFMFOFDf=.tMFMF\  FdE Mπ}}\=t7=Du@hÃu =|uEND=|tX xMMH=tV=Dt3j_Ãu =|uEOD xM=tGvuEPEf6.&h,st5 hyh j jh,shj r=$t S軣,=t!=u=tSjjj M =t=tjSWjt 5>1=u =$u=~55>pjSEP =t|=tjuhjzt =tV=t%j=tPhjCt =t=tjhyhyjt jh,sh%j衠 e[^_sipkt pktnumsipkt ksipkt getsbufUWSEE5hyhjK Shyhj- }'PShyh j (Q0҉ψщHP5EPe[_xsinit kUS>Shyhj蠟 ~ Sj舝]rcvfil rdatapCALIBRATENONAMEAccess deniedrcvfil rcvexceptrcvfil skippingException listrcvfil discard refused: exception listrcvfil cmarg2rcvfil srvcmd 2rcvfil access deniedWrite access deniedrcvfil srvcmd 1Receiving!%srcvfil pipesendrcvfil rcvfilter rcvfile pipesend filterrcvfil pipename?Sorry, receive filter + filename too long, %d max. Name too longrcvfil asrcvfil dirflgrcvfil ofn1x/dev/nullrcvfil existsrcvfil permsrcvfil fncactrcvfil appendCan't append to a directory error - can't append to directory appending toCan't rename existing directory error - can't rename directory backup:rcvfil backup ofn1rcvfil backup ofn2 refused: namercvfil overwriteCan't overwrite existing directory error - can't overwrite directoryoverwritingrcvfil updateFile has same name as existing directory error - directory exists:rcvfil bad collision actionrcvfil ofn1rcvfil ofn2rcvfil ofpermsrcvfil calling zmkdirzmkdir fails error - directory creation failure:Directory creation failure. path created:rcvfil fspecrcvfilx: nrcvfilx: ofn1rcvfil fpfsecsUWVSyT/Djjjjj5hj̚ jh{5_ =u(:uf!fB#B5h8~uP8tP5A=t$=u Du_=t =t DuDEPPVEuP t$1 611ۃjhyhjf #h/h+N jhyhj腒 t6==jhyhjz==jh+hje jh+hj tn=t=tjh+hGj/e TP&y5`hyhbj菑 jh+h~jy j5/hje j5hjN =`uN=D}tE=/t<=t&=u=t5/jjj蜀 h5/8=t%=u=th+jjja hh+us =P=jh+hj脐 h+~}Wjhyhj` =t=tjh+hjc P1D~(=t=tjh+h jWc =thh+hrh5h+軏 jhhj襏 ƀhhFxjuh%jv jh+h0jc lt  }U Um$XmPhyh>j q5qu e[^_reof fncactreof discardreof discardingreof successreof cxseenreof czseenreof rdatapreof closf moving received file toreof MOVE zrenamereof RENAME zrename renaming received file toreof returnsUWVS}] 5`Whjߍ 5Phyhjȍ D =Pttjhyhj蕍 =#t=t =?u 5hyhjL h#P1=tH5Dhyhj 5Hhyhj j5hj =Du"8D%Du =Ht x1=Du=Huuh#5hyhjo 1=Du =HtPVhyhj9 }=th#=u=tjSWd =u \0=u {HtCL=B=D5=(C~5hyhj誅 5hyhj蓅 ( :tg=zt,DžPPRFFh5(Ph jPhj!  5hyhj 5hyhj 5hyhjɄ ==t115Dhyh j薄 5пhyhj =Du =пt1Shyh*jQ Whyh6j? hSWSh,sx0u5qhCS+ jh,shMj jPh\j܃ =пDžDžhj5пhkj臃 PP5пbDShj[ ,hhS1hSh,seS~jh,shj jPhj h,st=u6=u-jh,shj趂 h,sh5b=u=~5ہ:%jhh"jO 5hyh1j0 Sj555FtXP8s$5L5,p}===u =th,s5jFj5q =tb=u=tPjjjq =t2=u)=t hyu$Pjjp =ؿt2==jh,sh>j]T x,sWhh,sـ t0HPShFj豀 =t=tjSh>jS Sh;i=t!=tjPhNjS =t1=6=)5hyhRj =tQ=tjhyh`jWS =t)=t jL@4lhlj%S =,==tjhh}=t}=ttj,@4`hR=t)=u =th5jXjn =t=tjhhjmR q5qe lt.ٽ ٭$X٭Phyhju~ 5hyhj^~ [^_sdata entry, firstsdata drainsdata draining, winlosdata sbufnumsdata countdownsdata streaming pktnumsdata nxtpkt pktnumsdata packetsdata cx/zseen windowingsdata cx/zseen nonwindowingsdata spsizsdata binarysdata paritysdata eof, drainsdata pktnumsdata lensdata datasdata ttchkUWVS5hyh:j } 5hyhMj| =u =ti5hyhYj| 9+jhyhj5phyhojU| =pnWhyh}j2| =t6ByB?$)‰УPhyhj{ * u5hyhj{ E5hyhj{ kW =Du =Ht&=jhyhjn{ =tK5hyhjH{ 5hyhj1{ 5hyhj{ =t/=u&=u=u5Ãj5Ã5u y1>u89jhyh jz 15hyh1jaz Shyh>jOz S5hHj9z VS5jD^kà =t ShyhSjy rh9O=e[^_szeofUS]Duy5Shjy ;tSj5jZj \h#hyj5jZ|j|PD1]Dseofseof can't get s-bufferUSy}t_5Shajx 5薰| S5hyhfjx ]sxeof nxtpkt failssxeof packetUSy}t_q}5hyh5hyhj9x S]seot nxtpktUS3qShyh]jw }Ghyj5jBiÃ|'PHD訠1؋]rpar max 1rpar sprmlenrpar max 2rpar 8bq sqrpar 8bq ebqrpar xfermoderpar whatami2rparUWVS*EPhyhj%w 5@hyhjw =@~U9@} =@}uhyhjv =^~ l+~ l+j5De m+` n+I@o+K p+Mq+}*r+x'tJ tAtt"3=t*&x&=t x5hyhju 5xhyhju =u r+Nr+=r+=@}s+dZ=dt d0Bs+}t+=t+=tt+Nt+t+ }7u+оľܾ1=t=оt ̾=t =ľt =ܾt ؾ u+}  >=ľt   !v+} P =^~ J_ w+ x+}y+0z+_{+_|+_}1Ƀ=$tA=t=t=t-=u =ht=u=u =ht=xt$=xu=t =t =t }+x0ҍJE9~ l+ l+CF;uF9E5hyhjr =t!=~ʀ l+FQhyh-jfr Ɔl+=t5jhl+h;j@r 0l+HPhl+8 jdhl+h/Tl+e[^_spar biggest 1spar rprmlenrpar biggest 2spar packetspar 8bq rqspar 8bq sqspar 8bq ebqspar 8bq rqfspar setting parity to spacespar capasspar lscapuspar lscaprspar ebqflgspar swcaprspar swcapuspar yspar lpcapuspar lp lenspar slow-start spsizspar lp spmaxspar windowspar window after adjustmentspar no windowsspar sending, redefine spmaxspar biggestspar whatruspar streamokspar clearrqspar urclearspar sysindex xspar sysindex yspar sysindex biggestspar whoareyouspar sysindexspar whatru2spar whatru2 xfermodeRemote system type: proto whoareuD7proto special VMS prefixingU WVS}#\ MQhyhjTo 5Dhyhj=o =D~M9 D} DMuhyhj o jWhjn O }~ _P M=t 9} P=Lu&}~ _H| @ H@5L5@M]@\H}~-G%\}~O@ H H=\t+19\~!HP=C9\}~O JJ =Jt =JvJ #}~_C߃vCw LL#}~O  =Yu 3߃v w 5hyhjl 5hyhjl 5xhyhjl 5hyhjl t* ttO|==@t =@&u||x&f1ҡx9t =Yu|t<xPhyhjl =uss=u|xN}~!Bu_ЍCvd}~\W =tF=Yu8Nu?3<v<w"҉ ȾԾ=t  } q_ Shyhjj 1̾t =оt@Ծ1t =t@1t =ľt@Ⱦ1ؾt =ܾt@5hyhjBj 5hyh%j+j 5|hyh1jj =t"1t=t =|t@5ľhyh=ji 5ȾhyhIji 5hyhji G t 9u|F>uVhyhUjni 5hyh\jTi =F9E~}\7ۍۍCD7%Shyhhj i =t9]}E@# @#=  P=t=~ 5hyhtjzh 5hyhjch 5L5@?W@=ľ9u\7Shyhjh    9 } = =~ Ⱦ9} A Shyhjg @Shyhjtg Ⱦ5hyhjSg =~m5t554à 9~I=t=~ 5hyhjf uhyhjf F9E~%D7%#Phyhjf # #tT=t-=uB=ht=hu =t =tPhyhjf 5xhyhje =xt$=xu*=t =t =t # t5thyh"je =tt j6t|F9E=\7 ۉut3 Shyh/jSe Vhyh?jAe uhyhOj*e Cwa9u|\SMD9 Ph\S\Ph\hejd =\t$h\'lPh\htjd F9u|~>%#Phyhjd # tQ=$t"#Phyhjcd #t=u=ll=t=tjPhja7 =l25lh\hjc \1t FO)ȃupjhyhjc f:f6f:f6ff2f0fFfDf.=Pu=Ծu P=tu' 1e[^_gnfile sndsrcgnfile filcntgnfile whatgnfile binary = gnf_binarygnfile pipesendCALIBRATIONTransaction cancelledgnfile czseengnfile filefile EOFgnfile filefile filnamgnfile nfils?Internal error expanding ADD list gnfile addlist filnamgnfile cmlist filnamgnfile ngetpathgnfile getpathgnfile absolute.gnfile wildgnfile nzxpandgnfile znextgnfile donegnfile setting sndsrc backgnfile skipping:not sentSkippedU WVSDžDž5hyhja 5qhyhj` 5 hyhj` $ƅ= t?=u6=̿u-=$u 5hyhj` 5Dhyhjq` =Dt1=quh5$B,sDR=uK,s0s4s  $g=ؿt/ $hh4=u7= h0h,sHB =Hts=t=tjhyhj2 jhyhj$_ 8j j5Xhj^ jhXGDž=S=Xt.hh,sj  |jh,sh&j^ 5 hyh=j^    =X=̿=ȿtDȿ8t:h0h,s@ ȿ@uy(ȿ@hJzȿ@ ȿ5 h,shnj] L=~@=Xu7h0h,se@5 h,shj] Dž5hyhj^] =$tlh,sz u[9~Mh4l%S?hh,sS賬Shj\ (2Bhh,sS?jShj\ S[Wu =޿jShjq\ S_v=,t =t 5SPhyhj\ uS0jShj[ u'=$9a5 hyhj[ =h,s=,sth,sVuh,shj.[ =,su&jhyhj[ hh,sS= ~uSeQ8thPS= SuN=$t9,jShjxZ =t\=tSjh*Sj?Bh#=t=tjShjw- =t!=u=tSjjjI ==h3j55$S5 0 $h(j55l5hhhhhSR(t%10s%-10s %s %s %-10s %s %s -> %10s%10ld %s %s%s%s %10ld %s %s%s%s syies%sSummary: %ld director%s, %ld file%s, %ld byte%s%snxtdir return 2U WVS1=tM5thyh jJ 5xhyh/jJ jtPh>jJ t9x~tShyhM=|~_ |W=u;j5Wh]6SWhhj8J t=|,S,PShwjJ SjShjI (uy;uoCCCƅ-CCƅ-CCCPPeP jVhj9I t y=t5WhjH tX}Ot'PShVhhڔPShhh贔lt4Wy?tPPSVhhy 1Wy?tPPSh hFt0Hx==|y=t=t =u p5p=uyP5=uyP5 =uP5Qh$ht |t0Hx(tx5xhyh/jF t9x?|+ttShyhXjF ؍[^_snddirsnddir name./*snddir name 1snddir name 2Listing files: %s%s%s*/*snddir directorysnddir nzxpand nxpndDIRECTORY %sDIRECTORYsinit()UWVS]=h%=d%=`%uyjShjE ;t)hSSG(jShjlE jShjDE PhSEtjSh jD 0ۉщt=tCpPPPh.hِtщHx8S-?uDS @t7ڀ~/u hDhFRejPhIj1D =t =t 5P|jjjPj59 5|hyhZjC =|  0H=Rhoh膏 !|ffhShhjC ؍[^_skipping %10s: %s%sdeleted directory: %s%s%s%ld file%s deleted, %ld byte%s freed%sUWVSt9x=| |Pu|S,0Ѝt9t>/t N9u>/uF~SPt5pVh! 5pVh!h!hǍw5pVh!h讍^=|u{5p=uyP5=uyP55ph!hT |t0Hxtxt9xtt[^_Deleting "%s"%sREMOTE DELETEUWSE8u 1hPS6#5pSh#hdt0Hx=,t  5P|~o ###f#f![_Directory requested: cwdChanged directory tocwd failedFailed to change directory toUVSEDX=t=tjSh'%j3 SjVh=%j> =tw1ې4|~X=t!=u=tVjjj- =t=tjVhA%j C~V\S5u:=t!=u=tVjjj- =t=tjVhA%j' 5jShV%j= =t=tjSha%j 1e[^syscmdsyscmd zxcmd oksyscmd zxcmd failedUSM] `ti9td9t AB9uCBujhh'j= hj$jhh'j< `1Wjhh'j<  ` ]remsetremset xfer charset lookupRSET FILE CHAR nameREMOTE SET xfermodeUWVS]%C4FSWSh(j; jVh(j; $|=  $(-D-`-t-111-1--11-1-D-11111111111111111111111111111111111111111111111111111111111111111111111111111111111-D-`-t-111-1--11-1-D-111111111111111111111111111111111111111111111111111.$.L.1111111... //,/111101111111111111111111111111111111111111111111111111111111111111111111111111111111BwdpV=@#~ @#=^~ ^5x5VʂE=5LP#D[V蚂E^PhD5hv9j# 4>hD5h9j# ~hvҍT9g<WhD5h9jV# WhD5h9jB# ;ǃet߃=t,Duj'5h9jW5h9j# z}T:u:=t!=u=tSjjqjR 5HSh/:j" d8b=t"QtTu$hl:D$EE Q2$yS?$)ShD5h:j" E59VhD5h:j! <>eVhD5h:j! E|d @M ɉM| u'VhD5h:j! VGEFyV?$)9f}X5hD5h:jA! 5+h: T=$t =0 5hD5h;j 5hD5h=;j ?}ƅ[ 5d5hD5hY;j h:9 P9u:=Pt=@tR5\5PhD5hr;j 5PhD5h;j P>ShD5h;j \ 555PI\ShD5h;j u-=u5P5P[}5P[= = 5Rh:+ 595P6<>6E|d @ME|uVFyV?$)95Pu=tI=Du@5hD5h,<j 5hD5hF<j PY }t=~O<,rt?,rByZ?$)‰YHPhD5h]<j=t =Dt 6HY } zkz¡h9~6WhD5h<j W5h<j WhD5h<j E6ǃet߃zV }M=t0=u'=t<u<Rjjqj  b '\=t"QtTu$hl:EEQu!$5ƃoT5hD5h$=j 5hD5hD=j 5w, 4Wdv|D=D  5hD5h{=E555PZX5PhD5h=j 5hD5h=j ,ShD5h=j Yq= P,r4VhD5h=jY dv\ShD5h=j* D_9}RhD5h=j =tZdvҍthD5h=j dt hD5h=j 5hD5h >j dv|uAT 9}29} 5hD5h>j? =t15hD5h%>j 5hD5h4>j =tA9|4= +=u" ɉM QhD5hD>=~G9}7+й]uhD5hT>t@EЙ}ud=~[9}K9~>+й]uhD5hd>j 9}PhD5ht>j =Pt=@t5P5\5PT5PRP9u:,rByZ?$)‰УPhD5h>j5PhD5h>uG=>5PhD5h>j 5PS5ƃ|5PhD5h>j 5PSN=l5PhD5h?ju P4~Ldvƃ|2Du7D2  5hD5h?j 5PSu_jhD5h8?j P|~ d[؃| u 5 5PƃMByr?$)9P=~CRhD5hC?ji 5^ƃQEh=5PhD5hb?j! ?=Pt5PNu!=St =Iuj5PE5PhD5h?j Eh?z'P9WhD5h?jy =u$=ujhD5h?jQ iE7= \  h>5\hD5h<jh<5hD5h<j 5hD5h<j $5hD5h<j -TE&h <x5PhD5h;j} h;75\hD5h:jjhD5h=:jI ShW:Eh9EPRhD5h9j oShD|0։H|@jhD5h^9j T=50hD5h;j_ q{L䐐5hD5h_=j) h=EZ\\5hD5hv9j 5PhD5h?j WhD5h?j =e[^_parchk nparchk startU WVSu}] WhD5hQj| PhD5hQjg M8 F F Fx 1"F"FF} m^NMNMU8u@ӊF8u$UF8uъF8ueIU8t6ӊF8t(UF8tUF8t oe[^_chktimo streamingchktimo timochktimo flagchktimo spmaxchktimo urpsizchktimo plenchktimo new timoUWVS] 5hD5hSj =t 1 uhD5h#Sj ShD5h0Sj 5hD5h=Sj 5hD5hKSjy E[ÉD= Dž~uu)Ƌ M9~]ShD5hZSj 9}9ؙƹ Ã9u}uuhD5hgSj Ee[^_spack nspack dataspack dspack lenspack copyspack mydataspack sseqtbl[n]spack sending packet out of windowSTREAMING spack skippingspack spktlspack ttol returnsFAILED: Connection lostspack ttol msecspack calling screen, mydata=@@U WVS}MMEEM9 %E=tnu hD5hTj{ }Dt(PPhTj_ uuhTjM WhD5hTj8 uhD5hTj$  lM^%E5uM M=tOVhD5hTj uhD5hTj }} =uu hD5hUj }~$dMIȉtM LMLM NMNl}tRй_F  F VVFFFF‰%$? F "V}t OtM3AMCOu3ht0 tt7tf؃PFPa o؃PFP&؃PFP%  3C$? 3C$? "؃PFPM$?!3C$?!3CڊJ3C=(u_=t =*t=uD=*t;=J u2=t--t ~t 33 C3=(u=tRVu jsm2=t}mt3 etjot7stN\T9rTJ9sBT9r8 J9s.T9r$4J9sT9r"J9s=t5dz1=\t=(u5\h1iǃ=@~=}Nu(z} ~ M  zM }~dMIȉ\ =(u=tz]=(tEPhD5h3Uj 15Vphǃ=(5hD5hLUj WhD5hXUj }r=ta}\=t%=u=thkUjjj Lyhh<5 9}=t=yeU}U Um$XmPhD5hUj M =(u?  p  =tFu VhUj =tR1=t@=u}Dt}Yu1t+=t"=u=tVu EPj e[^_chk1USMU 1AJ%Ã?ShD5hj\j ؋]chk2USMU 1AJShD5h\j ؋]chk3UVSu] 1)1%31FKShD5h\j4 ؍e[^nxtpkt pktnumnxtpkt winlo nxtpkt nnxtpkt chkwinnxtpkt getsbuf failureUVS5hD5h]]j 5hD5hk]j CyC?$)à ShD5hy]j =u^55SBVhD5h]jT t 2S=}PhD5h]j% 1e[^UhD55MSTREAMING fastack kSTREAMING fastack can't getsbufSTREAMING fastack xUWVS<>WhD5h^j S?S;=ƃ}ShD5h^j` (hD5jSjYx(|HPhD5h^j! ~ W7@~V?ByB?$)‰1e[^_acknsackns kackns can't getsbufackns winloackns nUWVS]} SWh_j >MQhD5h_js S>S$<ƃ}ShD5h_jI W0HPSjYa|j5hD5h_j ShD5h_j 9u4}~ u?~V=ByB?$)‰1e[^_UhD5uack1US]uD5jSh`j} S5]nack bad pkt numnacknack can't getsbufUS]?vShD5ha;ShD5h-aj  }+S:}ShD5h2aj 1> dIʋLD9 |hD5jSjN]resend seqRetransmissionRESEND PKT NOT IN WINDOWRESEND kresend pktinfo index retry(resend)resend ttol msecresend ttol returns@@UWVSuEEVhD5haj 55V2>Ãu<2=\=>=/t~ lM hMlhh/0/HPjjYaÃjhaVj#(M hM lhD5jVjYÃH =tM=uD=t;hb5j%j? %VhD5hbj ShD5h-bj 1ShD5h6bjf dLD9 }  \dҍthD5hKbj =d| ue=\lV =t&=u=thRb5j%jF dD=tVp]=@~ odt t]Ã=t=peb}U Um$XmPhD5h[bj ShD5hlbj  =t)=u =thRb5j%jV dҍt tVjS%dDe[^_errpktProtocol Error:errpkt drainingDraining incoming packets, wait...Drain complete.?UVSuH$jVhej =t=tjVhfj: =t!=u=tVjjj D V555jEhV5C5 l5Pp5=tH@= =$ty=,l= =VEE5hD5hfj ===h#fjjjE]Em]EE@t3EXf}U Um$Xm@؃=@@j2kÃTtBzt==t+=u"=thD55PPjY 5=t"=u=thFfjjj" =    \e[^scmdString too longscmd spackUVS] uVSh&ij& S`|1555V5ShD5h;ij 4+ie[^GET Packet Internal Error 1sopkt NULL listsopktsopkt encstrsopkt overflowGET Packet Too Long for Serversopkt leftoversopkt fieldGET Packet Internal Error 8@ sopkt o->opktitemsopkt datasopkt opktcntGET Packet Internal Error 9sopkt pktnumsopkt spackSend Packet Failuresopkt rcUWVSEEE M M45,u(4ijhD5hijK  MPRhij( 6aSuhij $}urjhD5hij M M 5,t!>t 6$E^VEރu,4jj6h#jj| uvEES5h2jjN ])6D95,uF,VD5, vMq}@=,uijCƃta5,jC fZjf\jB0HPRh]jj F?M M juhojj\ 50hD5hzjjE 00~N}4j5hD5hjj 5u5jOà ShD5hjj }%4j#VC4>j}@ShD5hjj ؍e[^_srinit recursivesrinit regetsrinit retrievesrinit opktsrinit ooptssrinit omodesrinit cmargGET with no filenamesrinit null cmargGET Packet Internal Error 2srinit malloc fail O1Ox%dGET Packet Internal Error 3srinit malloc fail O2GET Packet Internal Error 4srinit malloc fail M1Mx%dGET Packet Internal Error 5GET Packet Internal Error 6srinit malloc fail F1GET Packet Internal Error 7srinit malloc fail F2U WVS}u ]5hD5h nj WhD5hnj VhD5h(nj ShD5h8njr 5|hD5hDnjX 5hD5hQnjA j5$h^nj* 40=$u $D5$8u4knjhD5hnEE=|j?ƃu4njhD5hn5|hnEP?0}ЍX ]PI?u4njhD5hneEP61?F=,u5,u=j>ƃu4njhD5ho5h-oEP>0}ЍX ]P>u42ojhD5hnEP6u>F=,u 5,Uru0=$ЍX9j >ƃu4NojhD5hjo(CP=u*4ojhD5hoj ->FG^~Gع_ G G5$W=F=,u 5,UrF5$}4jt8=t555jWZ555jHC=t555jV"555RtJPÅ} 4j؅~1e[^_ch == LFkstartch = CRkstart SOPkstart EOLkstart EOP chkspktkstart ksbufp - ksbuf >= 94US] uIjhth tj =  t = w!=K u jhth tj 8u8=  u 8,,PhD5htj(8K=8 PhD5h%tjX 88-,]h888h,Sh,h0tj 8uSh,hCtj wjhPth tj 8V=8tLw 88-,] 88jhPth tjc 1]B00zstart Zmodem SOPUU=t1Ðt=@u <@@8u4@@8u.<@jhD5h1vj á<@1Zmodem downloadreceive /protocol:zmodemset proto kermit, server, set protocol gset proto kermit,server,set proto xmodemset proto kermit,server,set proto xmodem-crcset proto kermit,server, set protocol yset proto kermit,server,set proto zmodemserverreceive /protocol:kermitUWVS]=,u=Hu =`=SP2t#jhD5hvj\ =v P,=LL$xxyxxxxx=v = w =5w t=bw ]=w DwfwfBwB ,=we[^_U WVSutx0}ЍH~_F8uTFҊF< uC]FStIu3B9|,t]E%EAPE@P9Et1]}Sue[^_rpack pktnumrpack ksbufautodownload parityautodownload parchkrpack timintrpack rcvtimorpack streamingrpack timint 0 || streaming but rcvtimorpack ttinl lenrpack ttinl msecrpack: ttinl failsrpack ^C serverrpack ^C en_finrpack fatalioBad packet headerrpack packet length less than 3Bad packet lengthrpack bad sequence numberBad sequence numberrpack echorpack bctlrpack chklenpacket too longrpack block check Bchecked charsblock check (1)should be (1)Checksum errorblock check (2)should be (2)block check (3)should be (3)CRC errorbad type B block check(crunched)rpack block check OKrpack got dup@@U(WVSEE5hD5h zj" } z G E} hMIʋ  ]P=t M K]jh,hzj =,5 ,1=,tBFG:uWP5 5hD5h&zj VhD5h:zj ,~95t5,=tS5@hD5hNzj 5hD5h[zj 5hD5hizj ZV]܃=@t =t-=t$5hD5hyzjR 5PEP5hMIȋDHP5 Hǃ=t3=st*=t!9t =tOWhD5hzj yUe0}}U Um$XmPhD5hzjt !WhD5hzjW us}ku6x5$hD5hzj! 5\hD5hz"u!L5\hD5hzj =\t]=tT=u=thD55)=t)=u =thD55jTj jh{jjrj =ujDT& == = x T1D1D1D1Šȉ%Ѓ?9tOujh {jjr ===h{ D:% H D:%+ly_WhD5h.{j) uEjhN{jjr $=H=;=.h]{x+l1 ЉPF=tlDPuRjrP?vqPhD5ho{js u=tjh{5PjrO==u=hh{ EF9t=\tBNu=uhD5h{j ujh{5Pj#e}It}SuElHC}Nu2 @E؃EeEl+Eأ l]؃=t.5lhD5h{j+ uhD5h{j   =h][9|}9WhD5h{j Sjh{5PjrQ19u~ >D.F9uD. }u0=huEjhD5h{jX }} }t#}2}sE؉V P9=t`j Ph |j E%PhD5h|j V PPhD5h+|j ujh9|jjru===hI|uE% ƉP P=9}EuJ EG E؉P P9hO =t[j Ph |j VhD5hX|jy P PPhD5hh|jM ufjhv|jjr6=i=\=OhI|] E% ÊE% ÉP P59b}EuY EG EG E؉P PR9 =tej Ph |j0 E%PhD5h|j P PrPhD5h|j ujh|jjr===h|4uNE%H ƉP P9}EuJ EG E؉P P9 D8VhD5h|j ujh|jjr$===hI|Hujh|jjr===h|5j%j 5PhD5h}j9 P4>tM PhD5h}j jh#}5Pjr VhMID=@~:J¡PP]>[؋ hT]\T=tZ1=t@=u}Dt =Du1t0=t'=u=tu5PEPj Ee[^_%c-xx-%02d-%c-%02d-%02d- UWVS} u]MM=j4w}),I<REPhmEP$(I<RWEPhyEP$U0HPRjbt |9u0ЍXSVj;t |jhj&t} e[^_tstats xfsecststats filcnttstats fpxfsecststats fptsecsTransaction complete files transferred total file characters communication line in communication line out elapsed time (seconds) effective data rate {Gzt?AU5hD5hj 5qhD5hj =quX|}U Um$XmPhD5hj F|1Gpu}U Um$XmPhD5hj =UxEuE}E EmmEPAG=tE=tjhD5hD5j =t=tjuhjϨ =q=q==t q+h#PhD5hԌj =t{=t5hD5hjS =tO=t5 hD5hj' =t#=t5hD5h"j q+h#ul==t3}U Um$XmPhD5h<j袧 ==5x==t3}U Um$XmPhD5h<j6 =t^=t0E}U Um$XmPhD5hVj =t=tjhD5hD5j̦ {Gzt?AUD%$u=l,Eu}E Emm}E Emmfstats tfcfstats whatfstats epktmsg complete, sizeU塸l=tCPhD5hʑjZ 5 hD5hՑjC j5hj, =PuN=DuE=Hu<= t38u)=t =t5lhD5hj6 ckmkdir 1 fcmkdirrmdir%s: no name givenckmkdir 2+UNIXOROSKckmkdir 3ckmkdir 4ckmkdir rccreationremovalDirectory %s not implemented in this version of C-Kermit%s %s: %s%s: removedUWVSu uuVhj >u4Ԓ}uΒPhڒhU{V6hVSV0H~"|/t0/DjVhjQ }t*hjjSVfwjVhj! $jVh j }u VV*ÃShhj uC(}uPh0hU }tyhhiUh}(}t V@V PVhmh4}uhhVR u}tVhthYU؍[^_uprsizdofastUVSl@#~ș  ~   = ~ =   Q5 V4 ^=^ 5hihpjj j[e[^inibufs sinibufs rini_pkts: no memory for s_pktinibufs size 1inibufs size zinibufs overflowinibufs bigbuf malloc failedinibufs size 2inibufs bigsbsizinibufs bigrbsizUWVS}Whh,j u hh6jz O} O=du#hEdu h@ 1ۋd[DC~=hu#hhu h@ 1ۋh[DC~=u$E dPV=|t5||E t8(\8(Vhh^jc ShhmjQ 9tjhh|j7 V|Vhhj } }ЙÉ߃St|lRhhj )؃x|pPhhʖj 16Vhhjr 6й1ƃ'e[^_makebufmakebuf bufsizmakebuf MAXWSUWVSu] }VhhBj ShhJj j hhYj FvW9}GؙËM19}5RX@ @ @@B9|ˉ؍e[^_mksbuf makebuf returnUVSup5d5l5tVÃ}Shhj VShhj 1,r@?~1(@~5p,؍e[^mkrbuf makebuf returnUVSu5h5p5xVJÃ}ShhޚjO JShhޚj: 1>@?~1@~5,؍e[^windowUS]Shhj CwSv| S%} '=t|=t 1]getsbuf bad arggetsbuf packetgetsbuf pgetsbuf data == NULLUVSu?vVhh j! ;Vhhj =pu =p}#jhh2j 19 <(( pdIȋdt ,rD D Djhh(j0 G  t,,9(}(A9 ;pe[^getrbuf new rbufnumUS=u =} 19~w<ubh[ڋ 5hhjC  t,,9(}(C9]freesbuf sseqtbl[n]US]Shhj ?v ~89 |0p(  t+ ,#4hhj` >dIʋdDD D D]freerbuf no such slotfreerbuf packetfreerbuf rbufnumUVSu|95Vhhrj hv\Shhj ?w ><t7 t ,5hhj4 hvDD D De[^freerpkt seqUS]Shhj >~P]chkwin packetchkwin winlochkwin slotsUWVS]u }ShhϠjo Vhhݠj] WhhjH ?w?v l9t17?9}9}!)~9}97?~9|9|109}"} @9| 9} 9|e[^_SEND BUFFERS:buffer inuse address length data type seq flag retries%4d%6d%10d%5d%6d%4c%5d%6d ...[%.72s%s] [(empty string)] [(null pointer)] free: %d, winlo: %d UWS=jhšjw]Ghӡj^].19d[tttt t44(Sh h (hjE\d[<|:tT0ɋ|:It7H~%Rd[th)h2 h4hFh hj[|8C955phXh hjw[} 1e[_RECEIVE BUFFERS:UWS=@hj[hӡj[19h[tttt t44Sh h (hjZh [ ىM0ɋE<IH~%Rh[4h)h hj@Z|8C9455hXhe hjZ} 1e[_sattr flagsattr zsattrsattr init max%ld%d@sattrsattr numsetsattr leftsattr sendingU WVS] EEShhjj蔾 uf=Pt`1ɐfMA^~S hпĉShhuj@ =5 hhj =t#} пH } .1ۃ=$E.f=,ur09 |_.0 =G19 0~4CA9 0EE%fEE=E"f= )؃~t"Ct""CBC8*#CACMCJCEE%fEE= E*f=$=,uA )؃*C!CACEf$,@lEuE0}эq~a )ڍA9|JE=;C!=;CCC19}EECA9|EEE%fE}t ==H==uyE#f=uk5ܿ~a )ڍF9|O=;#C =;C19}CA9|EE%fEE= <f=5пhCEP=0҉щMN )ډ@ 9|,=;! =D]Ef E= f=25HhCEP$=0҉щMN )ډ@ 9|+=;1 =D]Ef2 E=4E,f=(ut5 ~j=ua )ڍF9|O,C =;C19}$CA9|EE%fEE=<E-f=*uu5(~k=ub )ڍF9|P-C =;C19},CA9|EE%fEE==f= =5hCEPG=0҉щMN )ډ@ 9|.=;( =D]Ef E=u =d=E+f=&0֋ )ڍF9|y+C =;C=t P MC1ɀ=tCAuEE%fE E=uFf=&u< )؃~-+C!CRCEf&EShhjw uhhjc uhhjL }t}uIf=Pu5 )؃~)@C CEfP}u1Fu5hjֵ 0ЍpRV5jAe[^_name>=<;:98765432sys-dependentformatoriginprotectiondispositionencodingaccessblocksizepasswordareaaccountcreatordatetypesizeunknownU=uÐUBNuNV$jPhj =t=tj5hjO =>1^ۍ~Shhj諳 1D4GKVhh j} ~55hhjY =~5螲|9=u&=t=uh5$jj褢 1e[^_gtattr: no memory for dsbufgattr bad recfmgattr file typegattr binary 1 refused: typegattr attribute A=textgattr binary 2 refused: dategattr encodingI196I190I6/204I6/100gattr xfer charset lookupgattr: xfer charset unknown refused: character setgattr switch tcharsetgattr fcharsetgattr switch fcharsetgattr unk encoding attribute refused: encoding refused: bad disposition refused: mail disabled refused: print disabledgattr RESENDgattr: no memory for spbufgattr length refused: length bytes refused: length Kgattr fsizeN+gattr RESEND not binarygattr RESEND OKN?gattr returnUDWVSE E,s=`u=D}t=+tEȌ+NEĹE=P =u jeu hx P@M ALAH uFuEЃ߃ $ȴ ,<̺DȼT19}'MD+AMC9|D+9})EEPu N ]^19} M\AMC9|ƃ\u Fl\^h=\Au,=]t =]Mu=^=^Jjh\hj諮 MЋuĈFuE19} MhAMC9|ƃh9})E=gu Fh^Shhhj1 5hẖj h <vW=hItNEMЋuĈFuă=T==jhh۱M A8Aujhh&u F8Bjhhjd s19}&'MtAMC9|9})Eƃt=3u Ft^ =`jVu诅 MЋuĈFuă=Tu(=t=tjhhj E19}'MD+AMC9|D+9})E={EPu F4d19}& MAMC9|9})Eƃ\=u FD^@Shhj EAt Ct,.}uE38}uE?19~'`u[t t C9ShhFj7 9uljuh`j =X"EMЋuĈFuă=T==jhh|[h,Phhj蟪 5Lhhj航 =Xu4, w*B/wLRhhjK 5L5,迲Fjhhϲj =X EMЋuĈFuă=T==jhh=u jeu hfr 19}cMAMC9|9})E =\u FL^HE~W Pu`uBEM!AMă=Tu(=t=tjhhjxx u ~x~ Fx$$M 9~1 5$ $=t&5$h]SjShj认 }uEĸM}RuhhJjz =t*Ejhh"5hhUEP5 hhB10H jhhгj }u$=Ptjhh葆E u dž0H}}4P55=dtd`duhhjF Ee[^_initattr ofpermsUWS]CxCCCC CDC@CLCHCdC`CtCpCCC CC(C$C0C,C4C<C8=u j5hMjH CT0ҋ=щH؉CPC\CXClChǃǃ1e[_Attributes for incoming file length in K file type creation date creator account area password blksize access encoding disposition lprotection gprotection systemid recfm sysparam length replyUS] =wjuhj 3hhj sshjˠ s shj蹠 sshj褠 ss hj蒠 s$s(hj} s,s0hjk s4hhjT s8s =t=0t=8t  =`% 5 hh?j H~wHwLhJj躜 GL0u!=t=0t=8t5 Vhh[jz u{=`=D}=/5/h+0]}%jh+hhj" {1 j5/hj \RuX=+t+=`uhh+h,s~ =t!=u=tSjjj6 5 Shj舛 hWS8EhVÃtShh,sI tރ=t=tjVhjn Vh̓t Sh=t8==5hhj+n =t=tjhhjm L0w-=t$=tj@4lhjm , w-=t$=tj@4`hjm w@wDh j =$===h5$jje CY 8tO=tF=u=tP#=t%=u=thjjj  =tD=tjSh/jl =t =tj5h?jl j5hFj Ee[^_openc zxcmdUVS] SuIVShjϘ %\e[^canned: cxseen czseenUE8Xu D8Zu H=Hu =Dt x5DhhjI 5Hhhj2 1=Hu =Dtopeni nameopeni sndsrcopeni file numberaccess deniedopeni CD disabledAccess deniedCommand or pipe failureopeni pipesend zxcmdopeni zopeni 1openi zopeni 2Can't open fileopeni failedopeni messageUWVS}==ؿjWhqj 5hh|j Dž=u Džhhj躖 =$t}=Dut=ukEPWAuWtN=t=tjhWji jWhjO hh5yU}=DtPWjGÃ%`uhh5x SWhj `=udW!VWhj賕 uAh55SWuS0t1=t=tjhSj8f jShM]Wu SV!~#\jSh5j薒 \jSh(js 1e[^_opent zopenoUSljuhj!Shhj }1\؋]ckopenx fsizeUl\5$hhj谑 =t&=u=th5$jj clsif i_isopenclsif zcloseclsif successclsif xferstatclsif fsizeclsif ffcclsif cxseenclsif czseenclsif discardInterruptedRefused: %sclsif fstatsIncompleteUVS1j5`hhj觐 =`=tj}#ƃ=Vhh jU 5hh-j> 5hh;j$ 5$hhJj 5lhhVj 5Dhh`j܏ 5Hhhmj 5Hhhzj諏 =Du =Ht^=uU=t%=u=thjjj~ ==hjx=Pto=uf=t&=u=t5jjj~ =F=95h]SSj===D=HlwShhja Ի9$~I=t%=u=thjjj} =tv=umhjG=t%=u=thjjju} =t-=u$hj55$55 d `x[^clsof dispclsof cxseenclsof successclsof o_isopenFailure to closeCan't close fileclsof incomplete discarded incomplete: discardedDiscardedclsof fstats 1closf incomplete kept incomplete: keptclsof fstats 2UVSu1=Vhhj 5Dhhjh 5hh&jN 5\hh4j7 =dtd`d=\P=jÃ}}=t=tjh,shCj,_ =t%=u=thTjjj2{ ==hT=Tt=T==,st t h,sE1= jhhej =t=tjhhjB^ =S=F=t%=u=thjjj.z = =hjhhjY ̷=PuK= jhhj( =t=tjhhjd] = vy=up=ug=t%=u=thjjjOy =t0=u'hj55$55 Z` =\jhhjJ 轶=u=uv=Dum=Hud=t%=u=thjjjx =t-=u$hj55$55 _  \D؍e[^Character Set Translation 7.0.038, 10 Nov 1999utf8I190ISO 10646 / Unicode UTF-8ucs2I162ISO 10646 / Unicode UCS-2latin9-isoI6/203ISO 8859-15 Latin-9greek-isoI6/126ISO 8859-7 Latin/Greekhebrew-isoI6/138ISO 8859-8 Latin/Hebreweuc-jpI14/87/13Japanese EUCcyrillic-isoI6/144ISO 8859-5 Latin/Cyrilliclatin2-isoI6/101ISO 8859-2 Latin-2latin1-isoI6/100ISO 8859-1 Latin-1asciiASCIItransparentTRANSPARENTlatinlatilatlaljapanese-eucelot928-greekkoi8uKOI8-U Ukrainian+Boxdrawingkoi8rKOI8-R Russian+Boxdrawingmazovia-pcPolish Mazovia PC Code Pagecp1250Windows Code Page 1250bulgaria-pcBulgarian PC Code Pagecp1251-cyrillicWindows Code Page 1251cp855-cyrillicPC Code Page 855cp858PC Code Page 858cp869-greekCP869 Greekelot927-greekELOT 927 Greekcp862-hebrewCP862 Hebrewhebrew-7Hebrew-7 DECdec-kanjiJapanese DEC Kanjishift-jis-kanjiJapanese Shift JISjis7-kanjiJapanese JIS7koi8-cyrillicOld KOI-8 Cyrillicshort-koiShort KOIcp866CP866 Cyrillichp-roman8Hewlett Packard Roman8dg-internationalData General Internationalmacintosh-latinApple Macintosh Latincp852PC Code Page 852cp850PC Code Page 850cp437PC Code Page 437next-multinationalNeXT Multinationaldec-multinationalDEC MultinationalswissSwiss NRCswedishSwedish ISO-646spanishSpanish ISO-646portuguesePortuguese ISO-646norwegian/danishNorwegian/Danish ISO-646italianItalian ISO-646hungarianHungarian ISO-646germanGerman ISO-646canadian-frenchCanadian-French NRCfrenchFrench ISO-646finnishFinnish ISO-646dutchDutch ISO-646britishBritish/UK ISO-646US ASCIInorwegiankoi8koikokiso2022jp-kanjihebrewhebrehebrhebhefr-canadiandanishcp866-cyrilliccp1252apple-quickdrawSwissSwedishSpanishRussianPortugueseNorwegianJapaneseItalianIcelandicHungarianHebrewGreekGermanFrenchFinnishDutchDanishASCII (American English)ukrainianrussiannonejapaneseicelandicgreekenglish  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~???????????????????????????????? !c#$Y|P"Ca"~-R_o?23'u--,1o"????AAAAAAACEEEEIIIIDNOOOOOxOUUUUYTsaaaaaaaceeeeiiiidnooooo/ouuuuyty  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ɻȼ̹ڿôŰ՟Ͼ󨷵ǎԐѥ噞ᅠƄФ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ןѪÄȞϕ̋յݯ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~Ӵܤ妧ҭ۱׵ϲ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ϴۭ񡿤ڸ׻  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ɻȼ̹ڿôŰ՟ϝ󨷵ǎԐѥ噞ᅠƄФ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ܢןѪؓÄȞϕ̋յݯ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~۴ɤШȲ̀܄ͅާݖֿ  !"?$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz???' !?#|??]{C?"?-R?[???~u??,??"}\@?AAAA[AACEEEEIIII?NOOOOOxOUUUUY?saaaaaaaceeeeiiii?nooooo/ouuuuy?[  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ????_?abcdefghijklmnopqrstuvwxyz???? !??????"C?"?-R?????'u??,??"????AAAA[]ACEEEEIIII?NOOOO\xOUUU^Y?saaaa{}ace`eeiiii?noooo|/ouuu~y?y  !"?$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz???? !?#???]"C?"?-R?[???'u??,??"????AAAAAAACEEEEIIII?NOOOOOxOUUUUY?s@aaaaaa\}{eeiiii?nooooo/o|uuuy?y  !"#$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ????_?abcdefghijklmnopqrstuvwxyz???? !??????"C?"?-R?????'u??,??"????AAAAAAACEEEEIIII?NOOOOOxOUUUUY?s@a[aaaa\}{]eii^i?noo`oo/o|u~uy?y  !"#$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz???? !?????@"C?"?-R?????'u??,??"????AAAA[AACEEEEIIII?NOOOO\xOUUU]Y?~aaaa{aaceeeeiiii?noooo|/ouuu}y?y  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !??$???"C?"?-R??@??'u??,??"????AAAAAAACE[EEIIII?NOOOO\xOUUU]Y?sa`aaaaace{eeiiii?noooo|/ouuu}y?y  !"?$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_?abcdefghijklmnopqrstuvwxyz???? !?#???@"C?"?-R?[???'u??,??"????AAAAAAACEEEEIIII?NOOOOOxOUUUUY?s{aaaaaa\}]ee~iii?n|oooo/o`uuuy?y  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~???????????????????????????????? Ƞ㫾?Կᇈ闘  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz???~ !??????"C?"?-R?????'u??,??"????AAAAA][CEEEEIIII?NOOOOOx\UUUUY?saaaaa}{ceeeeiiii?nooooo/|uuuuy?y  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz???~ !??????"C?"?-R?????'u??,??"????AAA[AAA\EEEEIIII?NOOO]OxOUUUUY?saaa{aaa|eeeeiiii?nooo}o/ouuuuy?y  !"?$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ???^_`abcdefghijklmnopqrstuvwxyz`??~~ [?#???@"C?"?-R?{???'u??,??"???]AAAAAAACEEEEIIII?\OOOOOxOUUUUY?s|aaaaaa}eeeeiiii?|ooooo/ouuuuy?y  !"#$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ????_?abcdefghijklmnopqrstuvwxyz???? !??????"C?"?-R?????'u??,??"????AAAA[]ACE@EEIIII?NOOOO\xOUUU^Y?saaaa{}ace`eeiiii?noooo|/ouuu~y?y  !"?$%&'()*+,-./0123456789:;<=>??ABCDEFGHIJKLMNOPQRSTUVWXYZ?????`abcdefghijklmnopqrstuvwxyz???? !??????"C?"?-R?????'u??,??"????AAAAAAACEEEEIIII?NOOOOOxOUUUUY?s@aaa{aa\_[]eii^i?noo`o|/o#u~}y?y  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ |"~?R?',??x??/??  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ߢܬϸ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ݰ׶߮عՈԖٗ  !"$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ|^_`abcdefghijklmnopqrstuvwxyz'  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz  !"$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ^_`abcdefghijklmnopqrstuvwxyz  !"#$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz  !"#$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ^_`abcdefghijklmnopqrstuvwxyz  !"$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ^_abcdefghijklmnopqrstuvwxyz  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~޵?????????????????`^~?????????????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ^_`abcdefghijklmnopqrstuvwxyz~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ^_`abcdefghijklmnopqrstuvwxyz~  !"$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZѿ^_`abcdefghijklmnopqrstuvwxyz~  !"#$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz  !"$%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz  !"#%&'()*+,-./0123456789:;<=>?ABCDEFGHIJKLMNOPQRSTUVWXYZ^_abcdefghijklmnopqrstuvwxyz"  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~зܾ޼  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ijٿŰͺȼʹ?SIJ-sij  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~𙛡쭧諶ࠢ묦窵  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~΀  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????SIIJ?????????siij?????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~???????????????????????????????????????????????????????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~аѱԴյӳظٹںۻܼݽ޾ߚֶҲ׷  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~󁂃򈉊  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ρ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????ΰƴijŸö˷  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^  e???SIIJ???k-u?abwgdevzijklmnoprstufhc~{}'yx|`qabwgdevzijklmnoprstufhc~{}'yx|`q?e???SIIJ???k?u?  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ΰƴijŸö˷  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ϕ減筜赶Ǝӷ⊙ꠃDŽء墓  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ܫꭼȺ̪㒓왚ٝ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~?L"SST-Z,'l?,sst"zRAAALCEEEIIDDNORUUYTraalceiednruuyt  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~aeeiġuuܤYfҼ?????!""???????????????????????????????????????????????????????????????????????????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~A?LLSSSTZZZa?lls?sstz?zzRALCCEEIDNNORUUTralcceeidnnoruut.  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~A?L??Ca<>R????????o>????AAAAEEIIINOOOUU?aaaaeeiiinooouu?y  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~???????????????????????????????? A?L?LS?"SSTZ-ZZ?a?l'ls?,sstz?zzRAAAALCCCEEEEIIDDNNOOOOxRUUUUYTsraaaalccceeeeiiddnnoooo/ruuuuyt.  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~߳еڱ޺  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~Ûĝɮ̀  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_?ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_@ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~`abcdefghijklmnopqrstuvwxyz?????????????????????????????????????????????????????????????????????????????????????????????????????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_{|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_@ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~????????????????????????????????????????????????????????????????????????????????????????????????`abcdefghijklmnopqrstuvwxyz?????  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~DŽՑ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ڼ۩ܣǽɫ͈όѓ㚛  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` |}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~??????a?.?|''e-giio??tt?x23a?egiiiotabcdefg?hi""?????jklm????no???????pq???????rstuvwxabc????de?fghijklmnopqrrs'-?tuv?w???xttx?   !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` {|}~  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ABCDEFGHIJKLMNOPQRSTUVWXYZ{|}~???????????????????????????????? ''???|?"??"?-?-??23'?a.egi"o?tx?abcdefghijklmnopq?rstuvwxitaegitabcdefghijklmnopqrrstuvwxitotx?UEUE?<wЉUE??$)***************************************************************?Ð {{j|iÐ|Ð"Ð'ÐUUƒ#K$ +++++d,,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,d,,8,T,+ {{e|AÐ {{e|OÐ {{a {{e|UÐeÐ {{e|aÐ {{e|oÐ {{aUUƒ>3$,---------------------------------------------------------------aÐ?ÐcÐeÐuÐ"ÐUUƒ>3$-.//////////////////////////...././/////////////////////////....aÐcÐeÐiÐoÐuÐUUƒ#$(/////////////////////////////////////?ÐcÐeÐuÐaÐoÐiÐUU<uAu {{E|OÐu {{e|oP UUƒ"$01,141x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1D1`1h1 {{E|AÐOÐ {{a {{e|aÐoÐ {{aUUƒ"$1(20282X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2X2@2H2P2AÐCÐOÐaÐcÐoÐUUƒ"$|233303030303030303030303030303030303030303030303030303030303033 3(3!ÐNÐ?ÐnÐcÐUUƒ>$T3P4(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5X4t444(54(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5(5444 5EÐ {{e|AÐ {{e|OÐ {{a {{e|UÐeÐ {{e|aÐ {{e|oÐ {{a {{e|uÐUUƒ݃[$L5 7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(76(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7666667(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(7(766 7 7eÐcÐiÐ {{e|aÐ {{e|oÐ {{e|uÐUUƒ>K$L7H888888888888888888888888888P8X8`888h888888888888888888888888888p8x888AÐEÐOÐUÐaÐeÐoÐuÐ"ÐUU<uAu {{E|OÐu {{e|oUUQP$9:::::`:::h:p::x::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::fÐ<Ð>Ð`Ð^Ð<u {{E|Oá<u {{e|oø?ÐUEЁtGt-t-St8 t&<t,2LÐfÐSÐsÐ-Ð*Ð%UE<#t %ÐUE\tDtDJÐÐÐÐÐÐÐÐÐ%UEUEUEUEUS]ӁvRi D4%t(Ӂv Rh 4%Ë]UEЁtw-tUtCtDtDrtP t>\tDtDJÐÐÐÐÐÐÐÐÐ%UEUEUEЁt# t'tÐÐÐ%UEUS]ӁvRC$JKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKÐÐÐÐÐÐÐÐUU\X$LhMMMMMMMMMMMMMMMMMMMMMMMMMpMMMMxMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM$Ð~Ð@Ð[Ð\Ð]Ð`Ð{Ð|Ð}ÐUUƒ܃Z$MLOOOOOOOOOOOOOOOOOOOOOOOOOOOOTOOOOOOOOOOOOOOOOOOOOOOOOOOO\OdOlOOOtOOOOOOOOOOOOOOOOOOOOOOOOOOO|OOOOÐÐÐÐÐÐÐÐÐÐUEЁt t ÐÐ%UEЁt t ÐÐ%UE$w<_v %Ð%UEUEUEUEUEUU=t =t ÐÐp~)19}#P׃} C9|1e[^_UWVSM11=XuR|h8Q˃C߃]vuX 0Xoh8Q1YX 0X=0u"h854ƿQh8h0!ƿ~119}8PU ҃|C9|=\X1e[^_U`dhU=d~0hlh d-dh=ؿ)9B߃]`t t1dlddрɀ ldʀld=ؿt M9 |x{{胝…|`dрɀ lKuG`=ؿt8 |x{{'…Ðu'`=ؿt8Ґ |ydld=ؿtg8 |x{{蟜…xdld$=ؿt 8 |x{{K…$dld@t B `dh=ؿ7(=ؿt }7 |x{{賛…dldBtJuw`dh=ؿj71u=dh=ؿ:6dld=dhlh dUfEfE\T(E+\t}~~A~@\T(E+\Esj_to_eu bad sjUSf]f]\T(E+\v wMOB~I~ B\ʀT(E+\ɀLu,_>w\D(E+\%fMPhhbj fEE]Uhd`1U1U S]=L=dt dhhlӉhdv UӉE} E EOMM@E}~M}~ EEEUʀMɀ ldhQ_>Aldh=L=dthlhhӉ…=dB߃]wy`t t2udlddрɀ lTdʀldӉ…_dрɀ lu`u`dldӉ…dld$u:Ӊ…dld@t B`K(u;Ӊ…dldBt J` dhӉ…eAdldKhlh dӉ‹]UEЁt3 t7tt"ÐÐÐÐ%UEUUw\$ghPh hPh(hPhPhPhPhPhPhPhPhPhPhPh0hPhPhPhPhPhPhPh8h@hHh?ÐSÐsÐZÐOÐoÐYÐP%UUw\$hh4ih4ii4i4i4i4i4i4i4i4i4i4i4i i4i4i4ii4i4i4ii$i,i?ÐSÐsÐZÐzÐOÐoÐYÐP%UUw\$liijijijjjjjjjjjjjijjjijjjjjj?ÐÐÐÐÐOÐoÐYÐPw%UEe[^initxlate csininitxlate csoutinitxlate bad csininitxlate bad csoutinitxlate Unicode xfuinitxlate Unicode xufinitxlate xlatypeUVSu] |VhhQojkShh`ojY 0vVhhpo0vShho9u-t\z\8|jjjj5|hhoj 5hhoj5\hhoje[^initcsets nxlsinitcsets nxlrinitcsets TERM LOCAL CSETinitcsets TERM REMOTE CSETU=D} \D=D} D5hhpj5@ hhqj 5Phhqj58hh.qj1,w@0~1@ ~\!$&..,w0w4w8wY winloproto G packet scmdREGET sstateError sending stringY vstateCPCPRO YCPCPRO Y xY winloCPCPRO Y not changing stateE winloLogin requiredGETserverDeleting files is disabledGET /DELETEGET /RECURSIVEGET /RECURSIVE /DELETEGET /RECOVERCKCPRO O sgetinit failCKCPRO O sgetinit doneEXTENDED GETCKCPRO O sgetinit TBCCKCPRO O sgetinit failCKCPRO O sgetinit doneCKCPRO O sgetinit TBCBadly formed server commandREMOTE HOST disabledHOST commands not availableREMOTE HOSTCan't do system commandsrv_timeoutDid you say RECEIVE instead of GET?Unimplemented server functionI srv_loginREMOTE CDREMOTE CD disabledCan't change directoryREMOTE TYPE disabledREMOTE PWDREMOTE DIRECTORYREMOTE DIRECTORY disabledREMOTE DIRAccess deniedNo files matchCan't list directoryREMOTE DELETEREMOTE DELETE disabledIt's a directoryFile not foundDELETE failedFINISHSERVER FINISHFINISH disabledREMOTE EXITEXIT disabledBYESERVER BYEBYE disabledC-Kermit BYE - Loggin out...REMOTE HELPCan't send helpsrv_renamesrv_copyREMOTE SETREMOTE SET disabledUnknown REMOTE SET parameterREMOTE TYPECan't type fileREMOTE MKDIRREMOTE MKDIR disabledDirectory access restrictedDirectory creation failureREMOTE RMDIRREMOTE RMDIR disabledDirectory removal failureREMOTE SPACEREMOTE SPACE disabledCan't check spaceREMOTE WHOREMOTE WHO disabledCan't do who commandsrv_queryInterruptedQUIT disabledSERVER (generic) GOT UNEXPECTED 'q'Unimplemented REMOTE commandY rcv_shortreplyF winlo 1F winlo 2Can't open windowRECEIVEsrv_firstdatackcpro.w B tmpdir restoringXZError writing dataCan't create fileCan't print fileCan't mail fileCan't delete temp fileCan't close fileRESEND capabilities not negotiatedSENDCan't execute commandCan't open file remote name:Can't send attributesY cxseenY cxseenY cxseenY CALLING SEOF() deleting moving source tosend MOVE zrenamesend RENAME zrename renaming source toY gnfilesseot justoneUnknown errorckcpro.w justone at E pktProtocol errorckcpro.w E tmpdir restoredERRORUnexpected packet typeU WVSXP5$Phuj$_v1ۡ$@$tHHw$~(tHl lp ,Dp؍l`4dЗܘ|ܠ $ХPd@l8444@LȭܭĮ Dj93aA =$A=,93E3jQ93\$ j%9n3$ $$ $$j8"3$ $$ $$j82$ $$ $$jQ82$ 5|5$5|5$ $$Fj8N2$$C"j7*2$$KjIB}88j71$$GjIQB$_,=t$=u Lui=t =t LuN=`t=`t=`t =`u*``jhth)ujj6(1;\ (t##$ ,=XhththQuj2 :11ۃ=uj860=t =lhhlhXu=*=lh*KPhthguG"1j 5h0H5qjhthquj0 =$tQjB5/5$$PÃ|1Shthuj;$A=$ u5Phthuj 5 $5$5$Ã}.=4u 4u54,DPNP$Phthuj\5$5$ jhthujUPhthuj9 =54o=$=,-j3._8\ (t##$ K=uANOjhthujX\5$5$5hthuj'1jhthvj=$t9j2,5$$PÃ|1$%=$ u5 $5$5$à }54\)~$jhthvjC5L\5$5$5 $5$5$- 5MmePFj1 =t =jj[==5h9v=t=u h*v(=t$=u Lu%=t =t Lu hDvy(jj#[[d==5h_v=u =t=u h*v'jjZ==5hkvn=u d=t=u h*vr'=t$=u Lu%=t =t Lu hDv1'jjY==5hzv=t =|jjY=|=o5hvT=t =(jj1Y}Phthv&=uCjhthvj==5hv5hthvj$F=t =pjjyX}Phthw%=uCjhth"wj4=?=25hv5hth@wjjh{5ljIjB8=t=u [=tW=t =tj5h\}jM5h,suP5hn}jô=U=zt(E@#EEPEPRpuE }tVE8tNPh,sLuS5h}jC~&=t=tjuh}j|RSh,sh}j~a5*,t$|=u8u |5z#|U$^;$ #5,hth}jQtjH@8tÀ;u$hS5ϕ ;u}5,hth}jղ!j &SIu=t=$u h}*{5  5\=xt)h4axPhh}j=[ht5h~5 8 j%)"|"h~bj5  5\=$=,t,j |Z \ (t##$ e[^_%s -s %c%s%c %s%s %sUS=Pth"||=tM=0t,=4t5<jrh5<h=t'h9=)+\8Mu6@Pj"h+j"5hSSj$Q\8Pu.@P5 hųSSjhh,sI=(=t!=uh |5"j |t4{P5 })h&|f=$ti=,uVc=t2˨$5荰=$t=,t,1rjQ|^\ (t##$ rcv_shortreplyIPKTZEROHACKrcv_shortreply remfilercv_shortreply fallthruU55huj裭55h5$$P/PhhjX=54蘽=$t=,t,1Ðj} Ð{\ (t##$ 0=(t##=0t\|=4t5<j]h5< 55<hjh=)j=(u =0u 4{|P5W }Dh&|v=$p=,YjAdi=tF8t<=0thtjF"=(t 躀u ht"=4t'=th4j(j>=u=u 55hthj葪REMOTE QUERYREMOTE QUERY disabledCan't get valueValue too longCan't send valueREMOTE ASSIGN disabledREMOTE ASSIGN failedUWS=~%=t5hh=vjj2=t!htPh5 SHQ3=t$=u uL=t =t u1h /貹=$=,##0HEJz\u;\CKuw0H~*|)u#@\@f@\@v@(E)EDV@\@v@(E)EDSu @$Gu @mEEEPEPSh }1}~!Pih~5 AhNt$`h@ S=t$=u u(=t =t u hQP҃BRP}hh賨à lh]w膨 =$t=,t,1sjI|^\ (t##$ e[_REMOTE COPYREMOTE COPY disabledCan't copy fileUWVS=~%=t5h|h=vjj}.=t$=u Hu_=t =t HuDh6蹵=$=,zjXtSPWBƄ+VSS#Ƅ.=tSWh|5 Y=t$=u Dus=t =t DuXPSOPVOSzuVgt hx=$ PPgthǥ͝4=$t=,t,1rjy} ]\ (t##$ [^_REMOTE RENAMEREMOTE RENAME disabledCan't rename fileUWVS=~%=t5hQh=vjj+=t$=u hu_=t =t huDh_^=$=,j)X|SPRdƄ+WsPR=Ƅ/|SPƄ+$W5VƄ/ =thQ5  =t$=u Dur=t =t DuWPSLPVLSAuV.t hx^=$ PPathv菢蕚=$t=,t,1rjA} ]\ (t##$ [^_REMOTE LOGIN x_loginREMOTE LOGIN x_loggedAlready logged in.REMOTE LOGOUTLogged outREMOTE LOGIN lenREMOTE LOGINUsername too longREMOTE LOGIN 1REMOTE LOGIN 2REMOTE LOGIN 3REMOTE LOGIN 4Logged inLogged in as guest - restrictions applyLogin failedAccess denied.Logout ignoredLogin ignored.Logout ignored.U S5hthj蟞5hthj舞ƅƅƅ1ۡ xt Xۃ==~ h5hthj=~!=tjhh=vjj&=ththth5 q=t =tj5hjqhh =VShthjF=~!=tjhh=vjj%~ hמ 19} *B9|Ƅ+ـ9tiAC=wU19} *B9|Ƅ+ـ9t1AC=w19} *B9|Ƅ+5hthjN=trjjPPNPhthj =t,5_==tNP5u#P5u 5hth.<=t=P5u 5hth=j)=tU=t =tj5hLj[n=thVhL>t=t!=tjPh~jnhl=t1=~(S!h~hh2貪=$u 1=,t,1rj|^\ (t##$  IKSD IDLE TIMEOUT: %d sec SERVER IDLE TIMEOUT: %d sec Connection lostSERVER DISCONNECTSERVER (top) GOT UNEXPECTED 'q'U==t 50h5\j50hU  \j  |n Ð=Lt[=~!=tjhh=vjj0!=kht5h'5 H=xs=t(=u \=t =t \hV{裙&=$u1Ð=,t,1Ðja} Ð\ (t##$ Ã= t= t = uA==jhJ{h=vjj= =qjhth9j荖j |.SEND disabledreceive download dirreceive current dirreceive zchdir okreceive zchdir failedU=$u 0==u|h*v芗jw}Ð\ (t##$ =$ =t(=u l=t =t lhAÖF=$u1Ð=,t,1Ðj)\ (t##$ Ð==xj5hOjDtojPhdj5Bt8jhthxjٓh5hvxjhthj術\5dhtУl Q$proto set binary modeA Kermit server is not available A Kermit Server is not availableproto()IKS client/server failureproto reset binary mode failed:proto xferstatUWVS111PU=tLdp##@tLH,0=hu 1=u =*u=t=*ut*=-t{=*ur=ui5u=tjh&( u#=tjh( tu hXs# =xt =vuZ=u=t=ït jj&5 ==jVT =t=tj+T ==ïuzjj4 uj=sta=t hnjhhj"=t5=t,jhhj^c=uB=t=tujHS =t*=-t~=*uu=ulu'=tjh1& u,=tjh& tu hm! UPt=u5  \=t =tj5hjb55hj蟎t=~@##=p~pdpDe[^_xxproto entry justone?No connection Sorry, you must 'set speed' firstfailed: proto ttopen localCan't open lineproto ttopen localCan't condition lineproto ttgmdmCarrier required but not detectedsrgcjhk ckcpro ttruncmd?Sorry, no external protocol defined for %s server backgrdserver quietSHOULD NOT SEE THIS IF IN BACKGROUND!KERMIT READY TO SERVE...Entering server mode on Type Ctrl-C to quit.KERMIT READY TO SERVE... Return to your local Kermit and give a SEND command.KERMIT READY TO RECEIVE...Return to your local Kermit and give a RECEIVE command.KERMIT READY TO SEND...Return to your local Kermit and give a SERVER command.KERMIT READY TO GET...KERMIT READY TO SEND SERVER COMMAND...proto calling wart, justoneC-Kermit server doneUpWVSEffM@5,hthgj$$ $=)}Y=4tjծ=gu/=$t&$8LtӀ8Ft΀8Xth}=tC=D}:=u1===hE5X5EPh|}L5h|hj=I=<=/h`}~E5h|hjg=t=uD=t*tZf.f=et =mu f=u$f:f6f:f655Pk }0=W=J==hq=0=uj=TtaP~WuSjhthj\===hjjj w=jjjh2EPl1ۀ=t =ïuS=su;=tLL,*LL0=Lu4";DžSPh=su$(8u$PSPW SPCh:P'=t =t*t-=t--t~u 0ӍC|" ؃| @Ƅ(PP=Luh=Ltst vtU>jWhjC ÃM@FOWShthj~t dtE=WShthj~Pu ueY}juhjEjhthj*~%hjhthj~Z|7]-}uEtU:f0}ЍX~?:{u|}tU:"u)|"u"UDBUSRhj}15Tuhja}=Ttv=t$=u du=t =tIdt@U:!u8B$U Dj5$h%j|=DuduuzG N=,t =t 5uI6أ U$}u jhth7jY|5hthMj5|=u hm}u5%jhthj{\}t z~&=u5L5Hj@1e[^_Command package 7.0.121, 24 Dec 1999septemberoctobernovembermaymarchjunejulyjanuaryfebruarydecemberaugustaprilCommand? UWS]0Ѝx=+t5+E}P+t€;tCB B;u+uue[_UU U%:%s%s%s %s%s%s UE H+@+EEu HMu7ju f}3h}Bu賧5jUE\+M@+Eu5\+h,j[uhuh9jZ U $  @ T T d9|}C=t5|hHjjW=u hfjTEhr6}uE MM 9u}tur,E0?‹MjRhjY} tqE8?tgWZtS `+MhEPM1E Љƒ  `+E `+9uM  G?uE0Oƒ:t6jRd}'h}u茥 \+EjQhjY}un0ҋM9҉URӤEu%hG}uE0u诤juhjXEM1TEPE0hjiX}$M1Sƒu:=8E0t0uS=,t  =t 5E0ƉuE}VE0hjWjM1hjW}ȉ =,t =t 5E0ƉuVM1hj+Wu5\+h-jWE(}=8jE0h<jV}t!}$t =,t =t 5M1BƉuE1uQu~ }uEu E0uh]j)V}$tHM9t@=8u7hk}t uX}uC}t}t}$uEx}u]E<:tM9t9u\+ffh'u5\+葡 {/th5\+Hu5\+7j5\+hjU}:uC]CfEH+@+0ҋ=\+҉HEMup}t} u =+u!uິ}$tRh }t u贠}.u蟠!}Luິ}$tRh }t ue}uPE8u~}u)M1uhjS}t E0}$uE0vM1OEu}tVEuM1hjCSu蟟}$t*u&E0h3 uS=4+u,=8thcM1h5M}tu$uO=}t u}t1 =4+uE0hS@}X}t u讞=+u=4+uM1hl=4+t* }tuVE uhuhjQ}uoE 8Ph0HH+u x\ju \ h}WuȝJ} M9?0ېW`+EhMQE0M щE hE8ҋ=`+։u))@+ `+E`+8u-E M} ҉H@+ G?JM1Gƒ:t6jR[}'h};u謜.\+M@+5\+uEhh5T+@+E \+E 5\+u!=jhM:.u z/u@+*CK=,t =t 5E0 ƉuVM1hj%O~h05h+1 h+h+ƀV5h+hjNɋEui=+u<5\+}$tRh }uuh=jhn}<5\+}$tRh }u肚E5@+5h+hjM@+EЃ h+I9}=M8uB9|9uEh+MDEСh+MЊuu5h+hjxM}h+@+Eأ@+Sh CtCu j5T+hjMj5h+@X}%hc}u65@+5\+hjL\+M=jh 5@+5h+h.jlL5h+H}$h+0ЍP='wD8+t+h+Dh+@+=tjheShW@+CtCu j5h+V}%h;}auҗT5@+5\+hUjPK\+MI}$tBh+0ЍP='wD8+t+h+Dh+@+Sh]SUj5h+V}'hl9}u }$t>5h+/Fu,5h+h}VuǖIHH+\+M}u萖E8u}$tRuho} M9?0ېW^`+EhMQE0M щE }}tuE8҉Uԋ=`+ҋE))@+`+M G?^M1?ƒ:t6jR^T}'h}uT\+M5@+PhjHE@+*CKj0hjH }$t 5,huhjoH=,t =t 5M1Ɖu=+tL5\+h5T+5l+hvh \}tuC5\+}$tRh/ }u}<5\+}$tRh }Qu“Dhu$jhuhuVQ}}u脓5T+5l+h~h djAE\+Me[^_cmfld xdef 1cmfld xdef 2?Default too long cmfld atmbuf 1cmfld: gtwordcmfld xcmfld 1cmfld 2cmfld zzstringValue too long cmfld 3cmfld returns Please complete this field %s%sUWVSu H+@+1UujVhjE}uEuuuhVh}(5HhhjEHujhP}$j@Ã\+U5H5\+hj>E=@+W5\+hjEShuhj E C 1$!!!!    !p!hr2W5\+h jDujVO8\+U}%P5\+hjZD}to`+ESPhj1DhEPU2U҃} Qj5`+GO} h)\+UW5\+h9jCU8ujVO|hU8uSU2hAjCuP>tKVhVNNHH+jVN}h~1x=t^jhMU:uhOuho5T+5l+hkVh <jf=Ãe[^_cmtxt, cmflgscmtxt: fresh startcmtxt:cmtxt gtwordcmtxt xcmtxt calling (*f)cmtxt (*f) returnscmtxt: addbuf Text string?Unexpected return code from gtword() - %d UWVSu }uEuuu+hVh$5Hhuh!jAH+@+=HuLEM0ҋ}҉HM EM +jhuh!j1AEu\+fHtg1j;Ë E5@+Qh!j@u)<9|}!=hf)t@+P5\+h!jy@Shuh "jg@ S $8$p$$''''%'%%$$%&胰9|=t5|hHjjj==u hfK}hr6M=uM1}`+EjM1h"jk?hEPM1EЉÃ} 0ҋ=`+I @+!E0҉H@+ `+E5@+M1h$"j>E0փ~< u N5T++W=uG>t2VhHH+VII@+ =8\+0ЍXjSVRI(=tjhShoSHHH+j5T+h7"j=dE8uhE"*uh5T+5l+hkh ShR"j7Ãe[^_Ujuhuuuu uUjuhuuuu uUjuhuuuu u?Keyword table missing cmkey: pmsgcmkey: cmflgscmkey table lengthcmkey cmflgscmkey zzcmkey cccmkey gtword xccmkey atxbuf after *fEvaluated keyword too long ?Not a switch - %s ?Ambiguous - %s cmkey token:?No keywords match - %s cmkey Esc cccmkey: defaultcmkey Esc pmsgcmkey lookup ycmkey lookup zcmkey partial zcmkey partial ncmkey partial jcmkey partial kcmkey partial len?No keywords match - "%s" cmkey flgs%s:cmkey: addbuf?Evaluated keyword too long No keywords match One of the following: %s, one of the following: or the name of a macro ("do ?" for a list) or the token %c or one of the tokens: %s %d - Unexpected return code from gtword cmkey gtword zzUWVSE}uEu}uEu+}u h' 0}HE@+EH+M Mu huh'j95Hhuh'j|9+5H ujuD}!h } %P3ƃu huh'j!95Hhuh'j 9 Vhuh'j85@+huh(j8 . @+Mu5\+h (j8F  $+$,,666|,,,,,,,|/5,Ϩ9|~} %P2ƃg=t5|hH蛽jj65 H1 hrj5Hp @+u*1uPu CÃ} hu=@+u # }`+EhEP5\+Mу  j5`+h(jC7;u]j5\+h+ 1uPSXBÃ} h2(<}t{\+8/tDM t(=tjhK5\+hN(8H7 }t'19}!\+<:t<=u \+B9|ߍEPu 5\+uIǃttOHM s=tjh葻5\+hb(~}t(19U~\+M 8JB9U}uNM t1=u(=tjh 5\+h( H =Ht }HjE@Mt診t |+u 0+E@MD +5@+huh(j4=@+M9teQhNu?ju@} hHH+5@+5\+h(j4+jhuh(je4E d}tV`+EhEP5\+Mу `;u]jSO?} h2(5EPu 5\+u_GW5\+h(j3 u5\+h(j3}M 9M'9M}%U E@MDtu EM 9M|u5\+h(jL3u 5\+h(j73uF 9u VvM4h)j3j5@+M45\+ u\MDuHDtE t;vM4E@4-SE@M4h)j29}F9u gWE@M4h")jr2'tx9=@+}pE@M@+P5\+]~\+\+@+Ph螷\+@+P5T+'~+@+E=@+u#=2jhRu?M ==tjh5\+h4)sE@MthuhO)jj1jE@Mt辶t[M uSt1=u(=tjh蠶5\+h(荶H]mjE@MtHtO]D[4E@MT19Tu'jt1ujMt1tC9] E@M@+}t'jt̵tShZ)εQ+:Sh蹵Q+ jE@Mt臵t |+E@MD +S:}tKjE@MtAt0 :0+H+Hj5T+h^)jz/}tJ`+EhEP5\+Mу jSw:}hl)`EPu 5\+uBǃuQHM 4='=tjhEh)8AM9uh)uh)U \+8tRjhuhu5\+u u}~=t h)跳\+8u:}uMPh)蓳}~uPh*s 5T+5l+hZh @}Vh(*=H?jI(V5\+hR*j-PShs(j{-Z%e[^_UU:t \+8tB:u1:tyrsyearswksweeksmonthsdays00cmcvtdatecmcvtdate nowcmcvtdate date too long+-TtYycmcvtdate NEWcmcvtdate offset ncmcvtdate unit startcmcvtdate time pointercmcvtdate unitcmcvtdate lookup failscmcvtdate offset units 00:00:00cmcvtdate dayscmcvtdate weeks%04d%02d%scmcvtdate months%04d%scmcvtdate yearstodaycmcvtdate todaytomorrowcmcvtdate tomorrowyesterdaycmcvtdate yesterdaycmcvtdate yyyymmddcmcvtdate yyyymmdd hh:mm:sscmcvtdate yyyymmdd ???cmcvtdate date bad timesepcmcvtdate null ztimecmcvtdate emtpy ztimecmcvtdate fail Acmcvtdate fail Bcmcvtdate fail C%02dcmcvtdate fail Dcmcvtdate fail Ecmcvtdate dotime scmcvtdate dotime pcmcvtdate fail K%s%s%02dcmcvtdate timesep:cmcvtdate fail Fcmcvtdate time icmcvtdate time fld[0]cmcvtdate time fld[1]cmcvtdate time fld[2]cmcvtdate fail Gcmcvtdate fail Hcmcvtdate fail Icmcvtdate fail Jcmcvtdate yearcmcvtdate monthcmcvtdate xcmcvtdate hhcmcvtdate mmcmcvtdate ss%s%s%02d %02d:%02d:%02dcmcvtdate hourcmcvtdate minutecmcvtdate secondcmcvtdate resultUWVSDždDž`DžXDžTl7DžPl7juho7j(}uEuƅlE8 u EM9 t0}Ѝpu!Ejuhy7jk(~jhuh7j u]S ]EPh7 ƒ1P>cHPuh7j'}+t }-M9-u]CExZ; uC;u;C;3wƃ1tC;u؀; RuLtLLhuh7jK';t:wƒ1҅tC;u; uC;ujSh7j&ރ>t_v R#s T4tF > t>-t<v >_8 >u> uF>ujVh7j&jSh7js& |P50,Sh+9ǃ}WSh8jW|@4+h8j!& tLHHAbREPq >tE VEPq08E48Ef88fEčMM0ҋ}҉NVuh:8]L@PHHaRMQOq >tE VEP9q08E48Ef88fEčEE0ҋ}҉NVuhI8WÊEKMCEKMECxKyƅzEPrǍxQrLй ǃ OCPRWhY8EPp>tE VEPUp08E48Ef88fEčEE0ҋ}҉NVuhd8sÊECECECEECPEPqLPhu8EPo>tE VEPo08E48Ef88fEčEE0ҋ}҉NVuh|8Ih8uÃE<t< t<-t Ҁv<_uwjREPPo 08M48Ef 88fMă E<tEPEPnMM0ҋ}҉NVuh8h8uÃE<t!< t<-t Ҁv <_HjH^REPn 08M48Ef 88fMă E<tEPEPnMM0ҋ}҉NVuh8h8u; ÃE<t!< t<-t Ҁv <_HjH]REPm 08M48Ef 88fMă E<tEPEPCmMM0ҋ}҉NVuh8j!`Ewƒ1҅6MQwƒ1҅ EPwƒ1҅MQwƒ1҅EPwƒ1҅MQwƒ1҅ZEPwƒ1҅.MQwƒ1҅Exu)h08Pkjuh+Gjuh8 CMQ wƒ1҅EP wƒ1҅MQ wƒ1҅EP wƒ1҅MQwƒ1҅tjEPwƒ1҅tBMy :u9y:u3y t y-ty_u!juh+juh8juh 9ju EEMIME@EMIMEE\MIME@EEMXE@EMIME]/1ۋut>> t>-t <v>_u9F>> u F> t>Ct>:t>Pt>pt >At>augvRRi T4t%Vwƒ1҅t6Dž` F>&9usu Dž``tP tujhuh=9t8ujhuhR9jtEP } uE0EEEMMEEEEutjhuhh9vu|ujhuhy9Tu\uHjj uh*,/ǃ}jhuh9Wh9lSgX ]0҉߈u\]X[]0҉߈\Xt ]uiuiƒ ~ ]MXU ' ~"ufR]EX)jhuh9+jhuh9XhWh9lPfjuh9jYjVh9jJ SUhǃ~jhuh9>u;} u5WX\h9h+!fDžd11Dž@l7>t@@LEl7El7>>:t>Pt>pt>At >aPVh:jz>Pt>pu!~Mt ~m~[>At>au"~Mt ~m~2F>t&> uF> t>ttCtF>IShuh&:jjuh7:j juhM:jjuhc:j u6"u~uETuuMPV]fÃdt  } t}jhuhy:Tfƃ;~jhuh:uPeh;~jhuh:M|Oh|F} tMh~@~;jhuh:jVh"9jjhuh:jqj\h:jPjXh:j< Whuh:j'Shuh:j Vhuh:jhhuh;j hVSWX\h;h+b =tQShuh';jVhuh6;j hhuhG;jxjh+hX;je14[^_Uu u| +Ð0NDate and/or timecmdate cmfld rccmdate 1cmdate 2?Evaluated date too long Invalid date or time - "%s" UWVSUu +uuuu:ugNMujEPVRUShuhxNjU juhNj9}W0EjPhNj$}te`+EhEPuMу } i;ujS }}u8hN6,`+EjuÃ}}u WhN M+؍e[^_UVSu=+tV=+tM19t+~++<t4`+C9t+5+z`+5t+++~It+@P_+u,19t+~+C9t++1e[^U=x+t=+t+|+UVSu+|1+<t!jj4Vt +Ky1e[^commandOops, command recall error UWS]uT+0Ѝx=t/==~KujShhQjj~.t =+=x+=t+=|++t+H9+|H+8t0^+19+~ +DB9+ ++++9t+hpQT)GP]++ tSQ]e[_UUB< v%cmcfm: cmflgscmcfm: atmbuf?Not confirmed - %s Press the Return or Enter key to confirm the command UVS5HhuhRjj5\+hSj@+1H+ jhu=HjX 5@+C w$S TSSSS*TS*T*ThT4TDTpThrڕ~=4+ufcodecmfdb cmnumcmfdb cmoficmfdb cmifi2 xcmfdb cmifi2 ncmfdb cmfldcmfdb cmtxtcmfdb cmkeycmfdb cmcfmcmfdb - unexpected function code?cmfdb - unexpected function code: %d cmfdb xcmfdb cmflgscmfdb crflagcmfdb qmflagcmfdb esflagcmfdb out->nresultcmfdb cmdbuf & crflagcmfdb codecmfdb failure xcmfdb failure errbitsDoes not match filename or switchDoes not match filename or keywordNot a number or valid keywordNot a number or valid switchNot valid in this position?%s: "%s" U WVS]11U8,4,<,@,++4+EE3huh*Uj ;$WW(XdXXYDYYتsEPj ss֥تVhuh:Ujt $sEPss蚨VhuhFUj:  }usss sEPEPss蕯ƃ VhuhRUj uhuhaUj  C+sEPssVhuhpUj  sEPssfVhuh|UjZ  sss ssssVhuhUj ,}]Ct R@MVhuhUj }*π"3huhUj 3hU1VhuhUj 5HhuhUj  5+huhUjo 5+huh VjX  5+huhVj> 8,4,E<,;uE@,1;u +D,5@,huh$Vj +4+5+5T+h7Vj  =+H3huhMVj ;5T+x[ +4+VhuhXVj; WhuhhVj)  uugAt. !t$t (Dt !~VVVVV5\+PhWBttt txUH=h=+tP+ S=+tP+?;=++P+e[^_ungword cmflgsU5Hhuh\\j=u%H|H1Ð1unungw atmbufU5H5\+h\j=t|H\+gtword brkchargtword brkgtword ungetting from pp?Saved word too long gtword returning atmbufgtword cmdbufgtword bpgtword ppgtword timelimitgtword cgtword dpx,echofexitinggtword c < 0gtword EOFgtword chargtword echof 2?Field too long error 1 gtword too long #1erasinggtword iscontdgtword too long #2?Field too long error 2 crflag is setgtwordgtword too long #3?Too long #3 gtword too long #4?Too long #4 %s %s%sgtword quote 0gtword quote 1gtword quote 3gtword quote?Command too long, maximum length: %d. UWVSEEEEE+t E(E) E{E}+++=0+tH+0+Q+Phuh ]juhuh]j =j5h$]j8 tj5}h=]։(h'55\+P\+ƀ'0=\+H ~\+| u H|HP5\+hS]jHVh]h]j|h]0HPRh ^juCh]0HPRh ^jA0HPRh6^jhI^艈 0HPRhw^jh^U 0HPRh^jh^!s j5T+hk]jj5hy]jn j5h]jW 18+0=D+t=P+t =t5|huh]j5|Vhuh]j$W5D+Ph]j=|t =u =u =tsPXta1҅}B, ,u=L<Lt xvT+ 8+ Q+=t5u<5huh]j=E}H #5*Vhuh]j}t1 t u\E} \u}u=,+tE u  u}t ;t#u"=H+u=,+tE M=}  Whuh]jt%j h =|t h N=H+u M8u } +j5  Q+HH+1 =}}=t :t'Ph@=|t h NM8u}uM+j5 HH+ Q+$ E9uEE9uM=(+t $+ t !tP }tF M9 sH+EE=H+t T+9vZx tx u3 Phuh^jg9w9v P0ҍC9v @0=(+t =$+(+1<\t-t8UuShuh'^jt4=8+M8Hu $+- $=$+~+=8+,}tM+j5H++jhb^hp^jH?uw=,+tn=ue}u_juV=8+tMj?h9j5+HWuK}j5y+Ht 9T+sY M8uM졼M8uE졼8 uM8u}u H+.=tjhS\+9uKs  9T+r\+H+k9T+r6=tjhu詋\+ 9T+w8/v<v <v:zv 뾐9T+wA:t;:/v6<v.<v&:zw!l  9T+vH+su5l+h^~5T+@Ӂv R7E D4%^tRhC~Fuh H7=8+=x+=t+t =+++<5T+4wDu=+ +++<X 9T+rh++45T+5T+5l+h^8} +=8+=x+=t++@9++++<5T+4yCu+@9++++<tm 9T+rh++45T+5T+5l+h^8|H7}u1=8+=jh{(+jPqEVhuh^j& ~B?t=t8=8+t/Vhuh^j\1(+Vhuh^jtSPV5T+h^j}u H+}u tT+9=tjhzhh^zHe[^_USM1ۀ9t+T+9sAC9uס +؋]UWVSU+t E(E) E{E}@+5\+0H='~ 9ud+h'VS@} u(0Ѓx < uHyDB: t1ɀ:tX]8uA]8uI}1Ʌu*: t: u} u+} u :=t ::t: t: tBF@+:u@+e[^_pushccmdgetc()cgtword IACgtword CR telnet errorgtword CR to LFgtword skipping LFgtword skipping NULgtword NULUWVS}=P+tV=uMP+PhphpjP+P+=4+?=u =uB1=P+u=u=*tWvkÃ3+o  ,hhphpjH,h5hC >jjuD+ uD+u Cjj"=u#=H,tjhuhqj; H,jhuhqj =H,H,jhuh-q"=H,t'H,jhuh@qjjhuhTqjaShuhp^j=tC=u:5H,& yh?؍e[^_UUS]Phu u j h{u] U=D+t htZuUS]=D+} t^jh2uj h&ujhuӁv R; D4%^tRPht=|t h >]UU WVSE9U3C\3{u C3EEFЃH$uvvvvvvvvvvwwwwwwwwwwvwwwwwwwwwwvwwwwwwwwvwwwwwwwwwwwvwwwwwwwwwwvwwwwwwwwvC E9E7C U11;t;;/v6U8w/׉UtCA;t;/v U8w~хt<~Z2uKPCiƃ}KPCR}U2ȃ }t ;}u~CUe[^_UU< w ƒÐ<wƒÈ<vЃUWVS} t0} HEt} 1[U40H9Eujuu V3tGjuu [4U42tPjuu Mt1 t}tU[MDlt}tUSCEH9Cjuu MIUtu!}t UJMMIU@e[^_UWVS} t0} Ѝpt}g19]~[[UU}0щJ9u2jVu uu}tE [MUD  C9]e[^_UE,+U,+More info at the Kermit Project website, http://www.columbia.edu/kermit/.book are the primary source of funding for C-Kermit development and support.It shows you how to use C-Kermit and answers your questions; sales of thisTo order: +1 212 854-3703 or +1 800 366-2665. PLEASE PURCHASE THE MANUAL.2nd Edition, Digital Press / Butterworth-Heinemann 1997, ISBN 1-55558-164-1.DOCUMENTATION: "Using C-Kermit" by Frank da Cruz and Christine M. Gianone, Type HELP OPTIONS for help with command-line options. for a menu (context-sensitive help, menu on demand). Press ? (question mark) at the prompt, or anywhere within a command, Type SUPPORT to learn how to get technical support. Type NEWS for news about new features. Type MANUAL to access the C-Kermit manual page. Type HELP followed by a command name for help about a specific command. Type VERSION for version and copyright information. Type INTRO for a brief introduction to C-Kermit.Trustees of Columbia University in the City of New York. check with the Kermit Project to see if there have been updates.If the release date shown by the VERSION command is long past, be sure tountil the third edition is ready.a supplement to the manual, "Using C-Kermit", second edition (1997),These new features are documented in the ckermit2.txt file, to be used as . Bug fixes. . Performance improvements. . New MANUAL command to access online documentation (HELP MANUAL). . General-purpose file i/o and floating-point arithmetic packages. . "kerbang" scripts. . New script programming features, functions, and variables. . Automatic character-set switching (HELP ASSOCIATE). . New Euro-compliant and other character sets. . Greek character sets. . Unicode - the Universal Character Set (UCS-2 and UTF-8) . Improvements in CD and other directory-related commands. . File-permission preservation in UNIX and VMS. . New data-bits/parity/stop-bits options (HELP SET SERIAL). . More/higher serial speeds on most platforms (SET SPEED ?). . Numerous modem and dialing improvements. . More-flexible wildcards for filename matching (HELP WILDCARD). . New streaming Kermit protocol for use on reliable connections. . File-transfer pipes and filters. . File-transfer selection and other option switches (HELP SEND, HELP GET). . Fast Kermit protocol settings are now the default. . Automatic per-file text/binary mode switching. . Recursive directory-tree transfer and directory listing. . More-powerful filename-matching patterns . Internet Kermit Service Daemon and client.Major new features (not necessarily available on all platforms) include:Welcome to C-Kermit 7.0.196. USA New York NY 10025-7799 Fax: +1 (212) 663-8202 612 West 115th Street Voice: +1 (212) 854-3703 Columbia University Web: http://www.columbia.edu/kermit/ The Kermit Project E-mail: kermit-orders@columbia.edureleases, and information about other Kermit software, contact:where xxx is the name of the command. For documentation, news of newFor further information about a particular command, type HELP xxx, SHOW COMMUNICATIONS, SHOW TERMINAL, SHOW FILE, SHOW PROTOCOL, etc.To display other settings: SHOW ESCAPETo display your escape character: Type your escape character followed by the letter C. To return from a terminal connection to the C-Kermit prompt: TELNET Select a TCP/IP host and CONNECT to it CONNECT Begin terminal connection SET HOST Make a network connection but stay in command mode SET NETWORK TYPE Select network type (if more than one available) LOOKUP Lookup entries in your network directory SET NETWORK DIRECTORY Specify a network services directory (optional) To make a network connection:(*) (For use with optional dialing directory)Further info: HELP DIAL, HELP SET MODEM, HELP SET LINE, HELP SET DIAL DIAL dial the phone number SET MODEM TYPE select modem type LOOKUP lookup entries in your dialing directory (*) SET DIAL AREA-CODE area-code you are dialing from (*) SET DIAL COUNTRY-CODE country you are dialing from (*) SET DIAL DIRECTORY specify dialing directory file (optional) To dial out with a modem: CONNECT begin terminal connection SET SPEED select communication speed SET LINE select serial communication device To make a direct serial connection: SET FILE file settings, for example TYPE TEXT or TYPE BINARY SET FLOW communications flow control, such as RTS/CTS SET PARITY communications parity Important settings: SET PREFIXING amount of control-character prefixing SET WINDOW number of sliding window slots SET RECEIVE PACKET-LENGTH Kermit packet size File-transfer performance fine tuning: ROBUST use extremely slow and cautious settings CAUTIOUS use slower, more cautious settings FAST use fast settings -- THIS IS THE DEFAULT File-transfer speed selection: SERVER be a Kermit server REGET recover an interrupted get from a server RESEND recover an interrupted send GET get files from a Kermit server RECEIVE receive files SEND send files Commands for file transfer: TYPE display a file on your screen TAKE execute commands from a file HELP command request help about the given command HELP request general help EXIT exit from C-Kermit Basic C-Kermit commands: Command words other than filenames can be abbreviated in most contexts. or introduce a backslash code, variable, or function. . \ (backslash) include the following character literally . ESC (or TAB) Attempt to complete the current field. . ? (question mark) Display a menu for the current command field. . CTRL-N: Command recall - go forward in command recall buffer. . CTRL-B: Command recall - same as Ctrl-P. . CTRL-P: Command recall - go backwards in command recall buffer. . CTRL-R: Redisplay the current line. . CTRL-U: Delete the current line. . CTRL-W: Delete the most recent word typed. . DEL, RUBOUT, BACKSPACE, CTRL-H: Delete the most recent character typed. While typing commands, you may use the following special characters: . TCP/IP network connections . Automatic modem dialing . Serial connections, direct or dialed. Supporting: . International character set conversion . Script programming . Terminal connection . Error-free and efficient file transferWelcome to UNIX C-Kermit communications software for: SHOW VARIABLE TERMINAL, SHOW VARIABLE COLS, SHOW VAR ROWS, SHOW COMMAND.Also see: size, the appropriate number is substituted. too large for what Kermit or the operating system thinks is your screen the lower right corner is 24 80. If a row or column number is given that numbers are 1-based so on a 24x80 screen, the home position is 1 1 and Moves the cursor to the indicated row and column. The row and columnSCREEN MOVE row column Clears from the current cursor position to the end of the line.SCREEN CLEOL Synonyms: CLS, CLEAR SCREEN. Moves the cursor to home position and clears the entire screen.SCREEN CLEAR the emulation you are viewing C-Kermit through. that the host terminal type is set to agree with the kind of terminal or depends on proper terminal setup on both ends of the connection -- mainly Performs screen-formatting actions. Correct operation of these commandsSyntax: SCREEN { CLEAR, CLEOL, MOVE row column } a literal string (HELP REGULAR-EXPRESSIONS for details). invocation, in which case it is treated as a regular expression rather than details on time-of-day format. The text, if given, can be a \pattern() and IF SUCCESS. Also see MINPUT, REINPUT, SET INPUT. See HELP PAUSE for INPUT waits for any character. For use in script programs with IF FAILURE for the given text to arrive on the connection. If no text is given, Waits up to the given number of seconds, or until the given time of dayExample: INPUT 5 Login: or INPUT 23:59:59 RINGSyntax: INPUT { number-of-seconds, time-of-day } [ text ]Also see SET OUTPUT. \L - Send a Long BREAK signal. \B - Send a BREAK signal. \N - Send a NUL (ASCII 0) character (you can't use \0 for this). etc, plus the following special codes: during CONNECT mode. The text may contain backslash codes, variables, Sends the text out the communications connection, as if you had typed itSyntax: OUTPUT text Also see SET TERMINAL BYTESIZE, SET SERIAL, and SET STOP-BITS. Chooses 8 data bits plus the indicated kind of parity.SET PARITY HARDWARE { EVEN, ODD } Forces 8th-bit prefixing during file transfer. Chooses 7 data bits plus the indicated kind of parity.SET PARITY { EVEN, ODD, MARK, SPACE } Chooses 8 data bits and no parity.SET PARITY NONEfor example, SET ESC ^_ sets your escape character to Ctrl-Underscore.letter or one of: @, ^, _, [, \, or ], to indicate a control character;You may also enter the escape character as ^X (circumflex followed by a C-Kermit prompt or followed by ? to see other options. (Control-\). Type the escape character followed by C to get back to the Decimal ASCII value for escape character during CONNECT, normally 28Syntax: SET ESCAPE number Normally ON (they are processed). Whether to process the special OUTPUT-only escapes \B, \L, and \N.SET OUTPUT SPECIAL-ESCAPES { ON, OFF } normally 0. How many milliseconds to pause after sending each OUTPUT character,SET OUTPUT PACING fails. PROCEED (default) allows use of IF SUCCESS / IF FAILURE commands. Tells whether to proceed or quit from a script program if an INPUT commandSET INPUT TIMEOUT-ACTION { PROCEED, QUIT } INPUT command times out, 0 for no maximum. The maximum number to seconds of silence (no input at all) before theSET INPUT SILENCE Tells whether to display arriving characters read by INPUT on the screen.SET INPUT ECHO { ON, OFF } inherited by subordinate macros and take files. This setting is local to the current macro or command file, and is Tells whether alphabetic case is to be significant in string comparisons.SET INPUT CASE { IGNORE, OBSERVE }Whether an INPUT in progress can be can interrupted from the keyboard.SET INPUT CANCELLATION { ON, OFF } Removes the old INPUT buffer and creates a new one with the given length.SET INPUT BUFFER-LENGTH number-of-bytes Controls whether autodownloads are allowed during INPUT command execution.SET INPUT AUTODOWNLOAD { ON, OFF }Syntax: SET INPUT parameter value variable should cause a command to fail. OFF by default. Whether an illegal function call or reference to a nonexistent built-inSET FUNCTION ERROR { ON, OFF } references to nonexistent built-in variables. ON by default. Whether to issue diagnostic messages for illegal function calls andSET FUNCTION DIAGNOSTICS { ON, OFF } SHOW PROTOCOL displays the current settings.use redirectable standard input/output.External protocols require REDIRECT and external file transfer programs that set proto ymodem rb {rb -a} {sb %s} {sb -a %s} rb rb set proto kermit {kermit -YQir} {kermit -YQTr} {kermit -YQx} spaces. Examples: to represent the filename(s). Use { braces } if any command contains receiving files with this protocol. Use "%s" in any of these strings in binary or text mode, respectively; s5 and s6 are the commands for s4 are commands used on this computer for sending files with this protocol the remote computer, and there are no s4-s6 commands. Otherwise, s3 and If the protocol is KERMIT, s3 is the command to start a Kermit server on RECEIVE process on the other end in binary or text mode, respectively. output prior to SENDing with this protocol, to automatically start the Selects protocol to use for transferring files. s1 and s2 are commands toSyntax: SET PROTOCOL { KERMIT, XMODEM, YMODEM, ZMODEM } [ s1 s2 s3 s4 s5 s6 ]Syntax: BYE Shut down and log out a remote Kermit serverdefaults; use SHOW OPTIONS to display customized defaults.COMMAND MORE-PROMPTING. Use SET OPTIONS DIRECTORY [ switches ] to changeFactory defaults are marked with +. Default for paging depends on SET /REVERSE If sorting, sort in reverse order. /ASCENDING + If sorting, sort in ascending order. /NOSORT + Don't sort. /SORT:key Sort by key, NAME, DATE, or SIZE; default key is NAME. /NORECURSIVE + Don't descend through subdirectories. /RECURSIVE Descend through subdirectories. /ENGLISHDATE In verbose listings, show date in "English" format. /ISODATE + In verbose listings, show date in ISO 8061 format. /NOXFERMODE + Don't show pattern-based transfer mode /NOMESSAGE + Don't add message to each listing line. /MESSAGE:text Add brief message to each listing line. /XFERMODE Show pattern-based transfer mode (T=Text, B=Binary). /NOHEADING + Don't include heading or summary. /HEADING Include heading and summary. /NOBACKUP Don't include backup files. /BACKUP + Include backup files (names end with .~n~). /NODOTFILES + Don't include files whose names start with dot. /DOTFILES Include files whose names start with dot (period). /NOPAGE Don't pause after each screenful. /PAGE Pause after each screenful. /ARRAY:&a Store file list in specified array (e.g. \%a[]). /ALL + Show both files and directories. /DIRECTORIES Show directories but not files. /FILES Show files but not directories. /VERBOSE + Also list permissions, size, and date. /BRIEF List filenames only. files in it are listed. Optional switches: the current directory are listed. If a directory name is given, all the characters, or a directory name. If no filespec is given, all files in Lists files. The filespec may be a filename, possibly containing wildcardSyntax: DIRECTORY [ switches ] [ filespec ]in effect. Also see HELP PURGE, HELP WILDCARD.command unless you override them; use SHOW OPTIONS to see selections currentlyUse SET OPTIONS DELETE to make selected switches effective for every DELETE Implies /LIST. Preview files selected for deletion without actually deleting them./SIMULATE Delete files without asking permission./NOASK Interactively ask permission to delete each file./ASK Don't pause after each screenful./NOPAGE If listing, pause after each screenful./PAGE Don't print heading and summary information./NOHEADING Print heading and summary information./HEADING Don't list files while deleting. Synonyms: /NOLOG, /QUIET./NOLIST List each file and tell whether it was deleted. Synonyms: /LOG, /VERBOSE./LIST Skip (don't delete) files whose names begin with "."./NODOTFILES Include (delete) files whose names begin with "."./DOTFILES /EXCEPT:{{pattern1}{pattern2}...} and inner braces around each pattern: specify multiple patterns (up to 8), use outer braces around the group regular filename or may contain wildcards, are not to be deleted. To Specifies that any files whose names match the pattern, which can be a/EXCEPT:pattern to be sent. Specifies that only those files smaller than the given number of bytes are/SMALLER-THAN:number to be deleted. Specifies that only those files longer than the given number of bytes are/LARGER-THAN:number Specifies that only those files modified at or after the given date-time/NOT-BEFORE:date-time Specifies that only those files modified at or before the given date-time/NOT-AFTER:date-time are to be deleted. Specifies that only those files modified before the given date-time/BEFORE:date-time to be deleted. HELP DATE for info about date-time formats. Specifies that only those files modified after the given date-time are/AFTER:date-time to match multiple files. RM is a synonym for DELETE. Switches include: The filespec may denote a single file or can include wildcard characters Deletes a file or files on the computer where C-Kermit is running.Syntax: DELETE [ switches... ] filespecSHOW CHARACTER-SETS to list the current settings.Use SHOW ASSOCIATIONS to list the current character-set associations, and to be selected automatically. Synonym: ASSOCIATE TRANSFER-CHARACTER-SET. and SEND CHARACTER-SET is AUTOMATIC, the specified file character-set is either by command or by an announcer attached to an incoming text file, Tells C-Kermit that whenever the given transfer-character set is selected,ASSOCIATE XFER-CHARACTER-SET is selected automatically. SEND CHARACTER-SET (q.v.) is AUTOMATIC, the given transfer character-set Tells C-Kermit that whenever the given file-character set is selected, andASSOCIATE FILE-CHARACTER-SET HELP SWITCH, HELP FUNC, HELP SET FILE).\farraylook() functions, and in file binary- and text-patterns (see HELP IF,in SWITCH case labels, the \fsearch(), \frsearch(), \fpattern(), andThe same wildcard syntax can be used for patterns in the IF MATCH command,a backslash, e.g. [a\-z] matches a, hyphen, and z rather than a through z.To force a special pattern character to be taken literally, precede it with may themselves contain *, ?, [abc], [a-z], or other lists of strings. ck{ufio,vcon,cmai}.c matches ckufio.c, ckvcon.c, or ckcmai.c. The strings Braces enclose a list of strings to be matched. For example:{string1,string2,...} letter from m through z. Lists and ranges may be combined. This example matches a, c, d, or any[acdm-z] For example, [a-z] matches any character from a to z. the range; a hyphen (-) separates the low and high elements of the range. Square brackets enclosing a range of characters matches any character in[a-z] the list. Example: ckuusr.[ch] matches ckuusr.c and ckuusr.h. Square brackets enclosing a list of characters matches any character in[abc] normal function of question mark, which is providing menus and file lists. question mark to be used for matching by a backslash (\) to override the with ".c". When typing commands at the prompt, you must precede any whose names are exactly 5 characters long and start with "ck" and end? Matches any single character. For example, "ck?.c" matches all files including "ck.c". matches all files whose names start with "ck" and end with ".c"* Matches any sequence of zero or more characters. For example, "ck*.c"This version of Kermit accepts the following wildcards:allowed to operate on only one file, such as TRANSMIT or COPY.that accept filenames also accepts wildcards, except commands that areFor example, in "send *.txt" the asterisk is a wildcard. Kermit commandsto match multiple files or in a search string when searching through text.A "wildcard" or "regular expression" is notation used in a filename"show macro fast", "show macro cautious", or "show macro robust".macro with the DEFINE command. To see the current definitions, typeIf that fails too, try ROBUST. You can also change the definitions of eachFAST file transfers fail for you on a particular connection, try CAUTIOUS.connections. FAST is the default tuning in C-Kermit 7.0 and later. In casecontrol-character unprefixing at the risk of possible failure on someFAST chooses a large packet size, a large window size, and a fair amount offile-transfer parameters at once to achieve the desired file-transfer goal.FAST, CAUTIOUS, and ROBUST are predefined macros that set severaldisplay customized defaults. Also see HELP DELETE, HELP WILDCARD.Use SET OPTIONS PURGE [ switches ] to change defaults; use SHOW OPTIONS to actually be deleted. Implies /LIST. Inhibits the actual deletion of files; use to preview which files would Purge backup files without asking permission. Interactively ask permission to delete each backup file. Don't pause, even if COMMAND MORE-PROMPTING is ON. COMMAND MORE-PROMPTING is OFF. When /LIST is in effect, pause at the end of each screenful, even if Synonyms: /NOLOG, /QUIET. The PURGE command should operate silently (default). Synonyms: /LOG, /VERBOSE. Display each file as it is processed and say whether it is purged or kept. By default, none are kept. If /KEEP is given without a number, 1 is used. Retain the 'n' most recent (highest-numbered) backup files for each file./KEEP:n Descends through the current or specified directory tree./RECURSIVE Skip (don't purge) files whose names begin with ".". Include (purge) files whose names begin with ".". regular filename or may contain wildcards, are not to be purged. To to be purged. are to be purged. to be purged. HELP DATE for info about date-time formats. directory. Switches: n is a number. PURGE by itself deletes all backup files in the current Deletes backup files; that is, files whose names end in ".~n~", whereSyntax: PURGE [ switches ] [ filespec ]Type HELP LOG and HELP OPEN for further info. WRITE-FILE (opened with OPEN WRITE or OPEN APPEND) READ-FILE (opened with OPEN READ) DEBUG-LOG (opened with LOG DEBUG) PACKET-LOG (opened with LOG PACKETS) TRANSACTION-LOG (opened with LOG TRANSACTIONS) SESSION-LOG (opened with LOG SESSION) CX-LOG (connection log, opened with LOG CX) current SET LINE or SET HOST connection. The other items are: Close the indicated item. The default item is CONNECTION, which is theSyntax: CLOSE [ item ]Also see: INPUT, REINPUT, SET INPUT. fails, and \v(minput) is set to 0. 1, 2, 3, etc. If none of the strings arrives, the command times out, \v(minput) variable is set to the number of the string that was matched: is encountered within the timeout interval, the command succeeds and the separated by spaces; use { braces } for grouping. If any of the strings the command waits for any character at all to arrive. Strings are strings to arrive on the communication device. If no strings are given, For use in script programs. Waits up to n seconds for any one of theExample: MINPUT 5 Login: {Username: } {NO CARRIER} BUSY RINGSyntax: MINPUT n [ string1 [ string2 [ ... ] ] ] string that might be in effect. it is given, and overrides (temporarily) any global SET TERMINAL TRIGGER all other CONNECT switches applies only to the CONNECT command with which trigger string, if any, that was actually encountered. This value, like Upon return from CONNECT mode, the variable \v(trigger) is set to the /TRIGGER:{{string1}{string2}...{stringn}} specify more than one trigger, use the following format: must enclose it in braces, e.g. "/TRIGGER:{READY TO SEND...}". To colon, e.g. "/TRIGGER:Goodbye". If the string contains any spaces, you command mode. To specify one string, just put it right after the One or more strings to look for that will cause automatic return to/TRIGGER:stringOther switches include:tells you how to escape back, etc. CQ is a synonym for CONNECT /QUIETLY.Include the /QUIETLY switch to suppress the informational message that escape commands. back to the C-Kermit prompt, or followed by ? for a list of CONNECT-mode recent SET HOST command. Type the escape character followed by C to get the most recent SET LINE command, or to the network host named in the most Connect to a remote computer via the serial communications device given inSyntax: CONNECT (or C, or CQ) [ switches ]separated by spaces.Just like GET (q.v.) except allows a list of remote file specifications,Syntax: MGET [ switches... ] remote-filespec [ remote-filespec ... ]Also see HELP MGET, HELP SEND, HELP RECEIVE, HELP SERVER, HELP REMOTE. Performs this transfer in text mode without affecting the global/TEXT normally contain variables like \v(filename) or \v(filenum). after, and only if, it has been received successfully. The string should Specifies that each file that arrives should be renamed as specified/RENAME-TO:string the files to be sent. Tells the server to descend through the directory tree when locating is equivalent REGET. Works only in binary mode. Used to recover from a previously interrupted transfer; GET /RECOVER/RECOVER When sending in local mode, this suppresses the file-transfer display./QUIET Overrides the global SET RECEIVE PATHNAMES setting for this transfer./PATHNAMES:{OFF,ABSOLUTE,RELATIVE,AUTO} directory after, and only if, it has been received successfully. Specifies that each file that arrives should be moved to the specified/MOVE-TO:directory-name input/output filter) before being written to disk. Causes the incoming file to passed through the given command (standard/FILTER:command Overrides the global SET FILE NAMES setting for this transfer only./FILENAMES:{CONVERTED,LITERAL} braces around the group, and inner braces around each pattern: are to be refused. To specify multiple patterns (up to 8), use outer regular filename, or may contain "*" and/or "?" metacharacters, after it has been transferred successfully. Asks the other Kermit to delete the file (or each file in the group)/DELETE line is interpreted as the name of a command. it on disk. The /AS-NAME or the second "filename" on the GET command Receives the file into the standard input of a command, rather than saving/COMMAND transfer mode. Performs this transfer in binary mode without affecting the global/BINARY filename on the GET command line. directory to store it in. You can also specify the as-name as the second Specifies "text" as the name to store the incoming file under, or/AS-NAME:text tries to create it. Optional switches include: that directory; if it is the name of directory that does not exist, Kermit is the name of an existing local directory, incoming files are placed in the as-name contain spaces, they must be enclosed in braces. If as-name server mode, to send the named file or files. If the remote-filespec or Tells the other Kermit, which must be in (or support autoswitching into)Syntax: GET [ switches... ] remote-filespec [ as-name ]Braces are required if the pipeline or filename contains spaces. log debug {| grep "^TELNET" > debug.log} log transactions |lprNote: The filename can also be a pipe, e.g.:the default for the connection log). Use CLOSE to stop logging.if any, is appended to; otherwise a new file is created (except APPEND isIf you include the APPEND keyword after the filename, the existing log file, options.) current directory; see HELP SET TRANSACTION-LOG for transaction-log format Names and statistics about files transferred (default: transact.log inTRANSACTIONS Records your CONNECT session (default: session.log in current directory).SESSION packet.log in current directory. Kermit packets, to help with protocol problems. The default filename isPACKETS The default log name is debug.log in current directory. Debugging information, to help track down bugs in the C-Kermit program.DEBUG default mode for opening. The default filename is CX.LOG in your home directory and APPEND is the Connections made with SET LINE, SET PORT, SET HOST, DIAL, TELNET, etc.CXRecord information in a log file:Syntax: LOG (or L) filename [ { NEW, APPEND } ] where dashed sequences are followed as long as previous expects fail. -send-expect[-send-expect[...]] may be expressed in the form: that a sequence might not arrive, as with uucp, conditional sequences e.g. ~0 or two adjacent dashes, causes a short delay. If you expect Only the last 7 characters in each expect are matched. A null expect, UUCP systems, sent strings are followed by ~r unless they end with ~c. append a return, and ~o[o[o]] for octal of a character. As with some ~b backspace, ~s space, ~q '?', ~n linefeed, ~r return, ~c don't Letters in send may be prefixed by ~ to send special characters: keyword EOT to send Control-D, or BREAK (or \\b) to send a break signal. 'send' is the names, numbers, etc, to return. The send may also be the where 'expect' is a prompt or message to be issued by the remote site, and expect send [expect send] . . . A login script is a sequence of the form: is intended to operate similarly to UNIX uucp "L.sys" entries. Login to a remote system using the text provided. The login script "Using C-Kermit". use the full script programming language described in chapters 17-19 of releases for comptability, but not recommended for use. Instead, please A limited and cryptic "login assistant", carried over from old C-KermitSyntax: SCRIPT text/WIDTH. Use SHOW OPTIONS to see current TYPE options.You can use SET OPTIONS TYPE to set the defaults for /PAGE or /NOPAGE and Count lines (and matches) and print the count(s) but not the lines. /COUNT Truncate each line at the given column number before printing. /WIDTH:number Print the given string at the beginning of each line. /PREFIX:string info about patterns. /HEAD and /TAIL apply after /MATCH. Only type lines that match the given pattern. HELP WILDCARDS for info /MATCH:pattern Only type the last 'n' lines of the file. /TAIL:n Only type the first 'n' lines of the file. /HEAD:n Don't pause at the end of each screen even if COMMAND MORE-PROMPTING ON. /NOPAGE Synonym: /MORE Pause at the end of each screenful even if COMMAND MORE-PROMPTING OFF. /PAGE screenful if COMMAND MORE-PROMPTING is ON. Optional switches: Displays a file on the screen. Pauses automatically at end of eachSyntax: TYPE [ switches... ] file TEXT-PATTERNS Clears the file text-patterns list. SEND-LIST Clears the current SEND list (see ADD). INPUT Clears the INPUT command buffer and the \v(input) variable. DIAL-STATUS Clears the \v(dialstatus) variable. DEVICE-AND-INPUT Clears both the device and the INPUT buffer. DEVICE Clears the current port or network input buffer. BINARY-PATTERNS Clears the file binary-patterns list. APC-STATUS Clears Application Program Command status. ALARM Clears any pending alarm (see SET ALARM).Clears the named item. If no item is named, DEVICE-AND-INPUT is assumed.Syntax: CLEAR [ item-name ]date-time strings as arguments.such as /AFTER: or /BEFORE, and to functions such as \fcvtdate() that takeAll the formats shown above are acceptable as arguments to date-time switches time (default 00:00:00). Examples: -1year, -37months. A date in the past relative to the current date, optionally followed by a - Examples: +3days, +7weeks. WEEKS, MONTHS, or YEARS. Optionally followed by a time (default 00:00:00). A date in the future relative to the current date; may be DAYS + Tomorrows's date, optionally followed by a time (default 00:00:00). TOMORROW Yesterday's date, optionally followed by a time (default 00:00:00). YESTERDAY Today's date, optionally followed by a time; 00:00:00 if no time given. TODAY The following shortcuts can also be used: assumed. . If both the date and time are omitted, the current date and time are . If the time is given but date omitted, 00:00:00 is assumed. . If the date is omitted but a time is given, the current date is assumed. . If the hour is 12 or less, AM is assumed unless AM or PM is included. . The time may be in 24-hour format or 12-hour format. English. . The month may be numeric (1 = January) or spelled out or abbreviated in . The date and time may be separated by spaces or underscore. . The day, month, and year may be separated by spaces, /, -, or underscore. . If the year comes first, the second field is the month. . The year must be four digits. . The date, if given, must precede the time. formats are acceptable. The rules for the date-time are: If a date-time is given, converts it to standard format. Various date-time Prints the current date and time in standard format: yyyymmdd_hh:mm:ss.Syntax: DATE [ date-time ]Also see HELP RECEIVE, HELP GET, HELP SERVER, HELP REMOTE. in this file (but a name can contain wildcards). that are to be sent. The filenames should be listed one name per line Specifies the name of a file that contains the list of names of files/LISTFILE:filename are not to be sent. To specify multiple patterns (up to 8), use outer are to be sent. to be sent. HELP DATE for info about date-time formats. transfer without changing global protocol. Uses the given protocol to send the file (Kermit, Zmodem, etc) for this/PROTOCOL:name Sends the file to be printed, with optional options for the printer./PRINT:options Sends the file as e-mail to the given address; use with /SUBJECT:./MAIL:address text contains spaces, it must be enclosed in braces. Specifies the subject of an email message, to be used with /MAIL. If the/SUBJECT:text SEND /STARTING:n filename is equivalent to PSEND filename n. Starts sending the file from the given byte position./STARTING:number the given directory. Tells C-Kermit to move each source file that is sent successfully to/MOVE-TO:directory which is replaced by the original filename. the given name (usually you should include \v(filename) in the new name, Tells C-Kermit to rename each source file that is sent successfully to/RENAME-TO:name all their subdirectories, etc. files that match the filespec, but also in all its subdirectories, and Tells C-Kermit to look not only in the given or current directory for is equivalent RESEND (use in binary mode only). Used to recover from a previously interrupted transfer; SEND /RECOVER successfully (applies only to real files). Deletes the file (or each file in the group) after it has been sent before sending it. Specifies a command (standard input/output filter) to pass the file through Overrides the global SET SEND PATHNAMES setting for this transfer./PATHNAMES:{OFF,ABSOLUTE,RELATIVE} of a command; the second (if any) is the as-name. The first "filename" on the SEND command line is interpreted as the name Sends the output from a command, rather than the contents of a file. Don't send files whose names begin with ".". Include (send) files whose names begin with ".". end with .~n~, where n is a number). Skip (don't send) Kermit or EMACS backup files (files with names that/NOBACKUP name. This is equivalent to giving an as-name after the filespec. Specifies as the name to send the file under instead of its real/AS-NAME: the name _ARRAY_X_, where "X" is replaced by actual array letter. to be sent as-is. If an as-name is not specified, the array is sent with are set up), or /BINARY to treat the array as one long string of characters array element (and translate character sets if character-set translations Include /TEXT to have Kermit supply a line terminator at the end of each the brackets empty or omit them altogether to send the whole 1-based array. \&a[]. A range may be specified, e.g. SEND /ARRAY:&a[100:199]. Leave Specifies that the data to be sent comes from the given array, such as/ARRAY: Optional switches include: sent under its own name. Also see HELP MSEND, HELP WILDCARD. the files(s) are sent under; if the as-name is omitted, each file is wildcard characters. An 'as-name' may be given to specify the name(s) the SEND-LIST is used (HELP ADD for more info). The filespec may contain Sends the file or files specified by filespec. If the filespec is omittedSyntax: SEND (or S) [ switches...] [ filespec [ as-name ] ]Also see HELP SEND, HELP GET, HELP SERVER, HELP REMOTE. Forces text-mode conversions unless the incoming file has the binary Equivalent to /PATHNAMES:RELATIVE. Use the given protocol to receive the incoming file(s). is interpreted as the name of a command. it on disk. The /AS-NAME or the "filename" on the RECEIVE command line attribute Skips text-mode conversions unless the incoming file arrives with binary You can also specify the as-name as a filename on the command line. Specifies "text" as the name to store the incoming file under.Optional switches include: incoming file or files will be placed in that directory. the name it arrives with. If the filespec denotes a directory, the files are stored under that name, otherwise it will be stored under SEND command. If the optional as-name is given, the incoming file or Wait for a file to arrive from the other Kermit, which must be given aSyntax: RECEIVE (or R) [ switches... ] [ as-name ]Syntax: RESEND filespec [name] Resend the file or files, whose previous transfer was interrupted. Picks up from where previous transfer left off, IF the receiver was told to SET FILE INCOMPLETE KEEP. Only works for binary-mode transfers. Requires the other Kermit to have RESEND capability.Syntax: REGET filespec Ask a server to RESEND a file to C-Kermit.Syntax: PSEND filespec position [name] Just like SEND, except sends the file starting at the given byte position. /TEXT; see HELP SEND for descriptions. given. Switches include /BINARY /DELETE /MAIL /PROTOCOL /QUIET /RECOVER and they may be in different directories. Alternative names cannot be listed, separated by spaces. Any or all filespecs may contain wildcards Sends the files specified by the filespecs. One or more filespecs may beSyntax: MSEND [ switches... ] filespec [ filespec [ ... ] ] Use SHOW PATTERNS to see the lists. See HELP SET FILE for further info. Adds the pattern(s), if any, to the SET FILE TEXT-PATTERNS list.ADD TEXT-PATTERNS [ [ ... ] ] Adds the pattern(s), if any, to the SET FILE BINARY-PATTERNS list.ADD BINARY-PATTERNS [ [ ... ] ] by itself to send the files from it. SEND-LIST and CLEAR SEND-LIST to display and clear the list; use SEND Adds the specified file or files to the current SEND list. Use SHOWADD SEND-LIST filespec [ [ ] ] Removes the given patterns from the SET FILE TEXT-PATTERNS list.REMOVE TEXT-PATTERNS [ [ ... ] ] Removes the pattern(s), if any, from the SET FILE BINARY-PATTERNS listREMOVE BINARY-PATTERNS [ [ ... ] ]Syntax: SERVER Enter server mode on the current connection. All further commands are taken in packet form from the other Kermit program. Use FINISH, BYE, or REMOTE EXIT to get C-Kermit out of server mode. type HELP SET ? to see what's available. SET parameters. Help is available for each individual parameter; parameters. The SHOW command can be used to display the values of The SET command establishes communication, file, scripting, or other SHOW KEY command. To find out the scan code and mapping for a particular key, use the translation. for the key k. SET KEY mappings take place before terminal character-set key mappings. If there is no text, the default key binding is restored pressed during CONNECT mode. SET KEY CLEAR restores all the default Configure the key whose "scan code" is k to send the given text whenOr: SET KEY CLEARSyntax: SET KEY k text blanks. BLANK-FREE-2 type is the same as Type 2, but is guaranteed to contain no specify more rigorous checking at the cost of higher overhead. The BLANK-FREE-2. Type 1 is standard, and catches most errors. Types 2 and 3 Type of packet block check to be used for error detection, 1, 2, 3, orSyntax: SET BLOCK-CHECK type Enables/Disables timestamps on debug log entries.SET DEBUG TIMESTAMP { ON, OFF } Equivalent to SET TERMINAL DEBUG ON. Displays control and 8-bit characters symbolically during CONNECT mode.SET DEBUG SESSION Stops debug logging and session debugging.SET DEBUG OFF Use LOG DEBUG if you want specify a different log file name or path. Opens a debug log file named debug.log in the current directory.SET DEBUG ONSyntax: SET DEBUG { SESSION, ON, OFF, TIMESTAMP } command, separated by spaces. recommended for safety. You can include multiple values in one SHOW CONTROL to see current settings. SET CONTROL PREFIXED ALL is character as-is, without a prefix. USE THIS OPTION AT YOUR OWN RISK! UNPREFIXED means you think it is safe to send the given control printable character and prefixed, the default for all control characters. PREFIXED means the given control character must be converted to a The word "ALL" means all characters in this range. is the numeric ASCII code for a control character 1-31,127-159,255.Syntax: SET CONTROL-CHARACTER { PREFIXED, UNPREFIXED } { ..., ALL } Modem command to set the modem's speaker volume.SET MODEM COMMAND VOLUME { LOW, MEDIUM, HIGH } [ text ] Modem command to select tone dialing.SET MODEM COMMAND TONE [ text ] Modem command to select pulse dialing.SET MODEM COMMAND PULSE [ text ] Modem command to disable local flow control in the modem.SET MODEM COMMAND NO-FLOW-CONTROL [ text ] Modem command to turn the modem's speaker on or off.SET MODEM COMMAND SPEAKER { ON, OFF } [ text ] Modem command to enable local software flow control (Xon/Xoff) in modem.SET MODEM COMMAND SOFTWARE-FLOW [ text ] Modem command to enable hardware flow control (RTS/CTS) in the modem.SET MODEM COMMAND HARDWARE-FLOW [ text ] A second INIT-STRING that is to be sent to the modem just prior to dialing.SET MODEM COMMAND PREDIAL-INIT [ text ] for the modem. The 'text' is a replacement for C-Kermit's built-in initialization commandSET MODEM COMMAND INIT-STRING [ text ] Command that tells the modem not to wait for dialtone before dialing.SET MODEM COMMAND IGNORE-DIALTONE [ text ] Command that tells the modem to hang up the connection.SET MODEM COMMAND HANGUP [ text ] Modem commands to turn error correction on and off.SET MODEM COMMAND ERROR-CORRECTION {ON, OFF} [ text ] Modem commands to turn data compression on and off.SET MODEM COMMAND COMPRESSION {ON, OFF} [ text ] Modem commands to turn autoanswer on and off.SET MODEM COMMAND AUTOANSWER {ON, OFF} [ text ]if any:Omitting the optional [ text ] restores the built-in modem-specific command,each modem type, or to fill in commands for the USER-DEFINED modem type.SET MODEM COMMAND commands are used to override built-in modem commands for Selects the desired modem speaker volume for when the speaker is ON.SET MODEM VOLUME {LOW, MEDIUM, HIGH} Kermit should not change its interface speed. the speed reported by the modem's CONNECT message, if any. OFF means ON means that C-Kermit changes its serial interface speed to agree withSET MODEM SPEED-MATCHING {ON, OFF} Turns the modem's speaker on or off during dialing.SET MODEM SPEAKER {ON, OFF} Descriptive name for a USER-DEFINED modem.SET MODEM NAME Specify the maximum interface speed for the modem.SET MODEM MAXIMUM-SPEED use this command to turn its Kermit protocol function on or off. If the selected modem type supports the Kermit protocol directly,SET MODEM KERMIT-SPOOF {ON, OFF} hangup command. RS232-SIGNAL means turn off the DTR signal. escape back to the modem's command processor and give a modem-specific How hangup operations should be done. MODEM-COMMAND means try toSET MODEM HANGUP-METHOD { MODEM-COMMAND, RS232-SIGNAL } Selects the type of local flow control to be used by the modem.SET MODEM FLOW-CONTROL {AUTO, NONE, RTS/CTS, XON/XOFF} For Hayes-compatible modems, Kermit uses three copies, e.g. "+++". Numeric ASCII value of modem's escape character, e.g. 43 for '+'.SET MODEM ESCAPE-CHARACTER number Enables/disables the modem's error-correction feature, if any.SET MODEM ERROR-CORRECTION { ON, OFF } given in your DIAL commands. include '%s' (percent s) as a place-holder for the telephone numbers The text replaces Kermit's built-in modem dialing command. It mustSET MODEM DIAL-COMMAND Enables/disables the modem's data compression feature, if any.SET MODEM COMPRESSION { ON, OFF } Synonym for SET CARRIER-WATCH (q.v.)SET MODEM CARRIER-WATCH { AUTO, ON, OFF } TB Telebit SB speed-buffering KS kermit-spoof SWFC software-flow ITU v25bis-commands HWFC hardware-flow EC error-correction DC data-compression AT AT-commands of a USER-DEFINED modem. Capabilities are: but in fact does not. Also use this command to define the capabilities for example, if your modem is supposed to have built-in error correction Use this command for changing Kermit's idea of your modem's capabilities,SET MODEM CAPABILITIES open the communications device in the correct mode for dialing. Give the SET MODEM TYPE command BEFORE the SET LINE command so Kermit can and SET MODEM COMMAND to tell Kermit how to configure and control it. to Kermit, and then user SET MODEM CAPABILITIES, SET MODEM DIAL-COMMAND, SET MODEM TYPE USER-DEFINED to use a type of modem that is not built in Use SET MODEM TYPE NONE (the default) for direct serial connections. Use list of the modem types known to Kermit, type "set modem type ?". modem-specific commands for configuration, dialing, and hanging up. For a Tells Kermit which kind of modem you have, so it can issue the appropriateSET MODEM TYPE see them. Also see HELP DIAL and HELP SET DIAL.you SET MODEM TYPE, according to the modem's capabilities. SHOW MODEM toNote: Many of the SET MODEM parameters are configured automatically whenSyntax: SET MODEM ... dialing. Use this if internal calls from your PBX require a special prefix. internal, then this prefix, if any, is added to the number prior to If PBX-EXCHANGE is set, and Kermit determines from it that a call isSET DIAL PBX-INTERNAL-PREFIX from the phone number. being on your PBX, so it can make an internal call by deleting those digits the leading digits of one or more local phone numbers that identify it as If PBX-OUTSIDE-PREFIX is set, then you can use this command to tell KermitSET DIAL PBX-EXCHANGE [ [ ... ] ] Private Branch Exchange (PBX). Use this to tell Kermit how to get an outside line when dialing from aSET DIAL PBX-OUTSIDE-PREFIX International dialing suffix, if any, to be used with portable dialingSET DIAL INTL-SUFFIX directory entries that result in international calls. Your international dialing prefix, to be used with portable dialingSET DIAL INTL-PREFIX distance dialing prefix. You toll-free dialing prefix, in case it is different from your long-SET DIAL TOLL-FREE-PREFIX [ ] Tells Kermit the toll-free area code(s) in your country.SET DIAL TOLL-FREE-AREA-CODE [ [ [ ... ] ] ] local. For use (e.g.) in France. Whether to force long-distance dialing for calls that normally would beSET DIAL FORCE-LONG-DISTANCE { ON, OFF } be used for appending a calling-card number to the phone number. directory entries that result in long-distance calls. This would normally Long-distance dialing suffix, if any, to be used with portable dialingSET DIAL LD-SUFFIX [ ] directory entries that result in long-distance calls. Your long-distance dialing prefix, to be used with portable dialingSET DIAL LD-PREFIX [ ] directory entries. Normally no suffix is used for local calls. Specifies a suffix to be applied to local calls made from portable dialingSET DIAL LC-SUFFIX [ ] directory entries. Normally no prefix is used for local calls. Specifies a prefix to be applied to local calls made from portable dialingSET DIAL LC-PREFIX [ ] string so do not include your own area code if it should not be dialed. spaces. Any area codes in this list will be included in the final dial require the LD-PREFIX. Up to 32 area codes may be listed, separated by Species a list of area codes to which dialing is local, i.e. does notSET DIAL LC-AREA-CODES [ ]number.country code, followed by area code in parentheses, followed by the phonethe dialing directory; i.e. numbers that start with a "+" sign andThe following commands apply only to portable-format numbers obtained from Establish a suffix to be added after all phone numbers that are dialed.SET DIAL SUFFIX [ text ] for example to disable call waiting. Establish a prefix to be applied to all phone numbers that are dialed,SET DIAL PREFIX [ text ]or found in the dialing directory:The following commands apply to all phone numbers, whether given literally How many seconds to pause between automatic redial attempts; default 10.SET DIAL INTERVAL because automatic redialing is illegal in some countries. no answer, until the call is succesfully answered. The default is 0 How many times to redial each number if the dialing result is busy or noSET DIAL RETRIES when dialing a list of numbers fetched from a dialing directory. calls. If this command is not given, there are no restrictions. Useful SET DIAL RESTRICT LONG prevents placing of long-distance and international Prevents placing calls of the type indicated, or greater. For exampleSET DIAL RESTRICT { INTERNATIONAL, LOCAL, LONG-DISTANCE, NONE } timeout calculation. of 0 turns off this feature and returns to Kermit's automatic dial to override the DIAL command's automatic timeout calculation. A value How many seconds to wait for a dialed call to complete. Use this commandSET DIAL TIMEOUT number Sets the list of countries in which tone dialing is available. Each ccSET DIAL TONE-COUNTRIES [ cc [ cc [ ... ] ] ] actually dialing. OFF for normal dialing. Set to ON to test dialing procedures withoutSET DIAL TEST { ON, OFF } is a country code. Sets the list of countries in which pulse dialing is required. Each ccSET DIAL PULSE-COUNTRIES [ cc [ cc [ ... ] ] ] modem database. dialer. The default is -1, meaning to use the number from the built-in How many milliseconds to pause between sending each character to the modemSET DIAL PACING number PULSE-COUNTRIES.) based on the country code. (Also see SET DIAL TONE-COUNTRIES and SET DIAL PULSE dialing. AUTO (the default) means to choose tone or pulse dialing Whether to use the modem's DEFAULT dialing method, or to force TONE orSET DIAL METHOD {AUTO, DEFAULT, TONE, PULSE} prior to dialing it, in order to perform any last-minute alterations. Specify the name of a macro to execute on every phone number dialed, justSET DIAL MACRO [ name ] Whether to ignore dialtone when dialing; default is OFF.SET DIAL IGNORE-DIALTONE {ON, OFF} Whether to hang up the phone prior to dialing; default is ON.SET DIAL HANGUP {ON, OFF} Whether to display dialing progress on the screen; default is OFF.SET DIAL DISPLAY {ON, OFF} dialed in the order in which they were found. effect, SET DIAL SORT OFF to disable sorting, and the numbers will be sorted in "cheapest-first" order. If this does not produce the desired When multiple entries are obtained from your dialing directory, they areSET DIAL SORT {ON, OFF} one directory, all of them are searched. dialed literally as given in the DIAL command. If you supply more than filenames, the dialing directory feature is disabled and all numbers are The name(s) of your dialing directory file(s). If you do not supply anySET DIAL DIRECTORY [ filename [ filename [ filename [ ... ] ] ] ] conversion, but the parity and speed fields are ignored. it alone (OFF). Old-style directories can still be used without ASK you whether to convert it, or convert it automatically (ON), or leave command tells Kermit what to do when it encounters an old-style directory: The format of Kermit's dialing directory changed in version 5A(192). ThisSET DIAL CONVERT-DIRECTORY {ASK, ON, OFF} displayed if DIAL succeeds and Kermit goes into CONNECT mode. indicate whether the verbose 4-line 'Connecting...' message is to be or AUTO, you may follow this by one of the keywords VERBOSE or QUIET, to DIAL command was issued from a macro or command file. If you specify ON do it if the DIAL command was given interactively, but don't do it if the dialing. ON means to do this; OFF means not to. AUTO (the default) means Whether to CONNECT (enter terminal mode) automatically after successfullySET DIAL CONNECT { AUTO, ON, OFF } in a replacement. Kermit ask you if it is OK to dial the number, and if not, to let you type In case the result might be wrong, you can use SET DIAL CONFIRM ON to have the dialing directory prior to dialing (use LOOKUP to see them). Kermit does various transformations on a telephone number retrieved fromSET DIAL CONFIRMATION {ON, OFF} central London is 171, not 0171. dialing prefix as part of your area code; for example, the area code for local or long distance. Be careful not to include your long-distance tell whether a portable-format phone number from the dialing directory is Tells Kermit the area or city code that you are dialing from, so it canSET DIAL AREA-CODE [ ] know what they really are. should follow this command by DIAL INTL-PREFIX and LD-PREFIX to let Kermit not your true international and long-distance dialing prefixes, then you code 1; 00 and 0, respectively, for all other country codes. If these are command sets default values for them: 011 and 1, respectively, for country If you have not already set your DIAL INTL-PREFIX and LD-PREFIX, then this Japan, ... 351 for Portugal, 47 for Norway, 44 for the UK, 972 for Israel, 81 for Examples: 1 for USA, Canada, Puerto Rico, etc; 7 for Russia, 39 for Italy, dialing directory will result in a national or an international call. from, so it can tell whether a portable-format phone number from your Tells Kermit the telephonic country-code of the country you are dialingSET DIAL COUNTRY-CODE DIAL to display all of the SET DIAL values.dialing the telephone. Also see HELP DIAL and HELP SET MODEM. Use SHOWThe SET DIAL command establishes or changes all parameters related to COMMUNICATIONS also shows the current flow-control setting. as well as the current connection type and flow-control setting. SHOW Type SHOW FLOW-CONTROL to see the current defaults for each connection type connection-establishment command. been chosen in your most recent SET LINE, SET PORT, or SET HOST, or other current flow control type, overriding any default value that might have If you omit the switch and simply supply a value, this value becomes the not to try to change the current flow-control method for the connection. and some others; again, type "set flow ?" for a list. KEEP tells Kermit The flow-control values are NONE, KEEP, XON/XOFF, and possibly RTS/CTS a connection, the associated flow-control is chosen automatically. "set flow ?" for a list of available switches. Then whenever you make kind of connection: /REMOTE, /MODEM, /DIRECT-SERIAL, /TCPIP, etc; type Switches let you associate a particular kind of flow control with each connection, and script execution. Selects the type of flow control to use during file transfer, terminalSyntax: SET FLOW [ switch ] value and SET FILE WARNING OFF is equivalent to SET FILE COLLISION OVERWRITE. COLLISION. SET FILE WARNING ON is equivalent to SET FILE COLLISION RENAME SET FILE WARNING is superseded by the newer command, SET FILESET FILE WARNING { ON, OFF } files that do not start with a Byte Order Mark. Byte order to use when creating UCS-2 files, and to use when reading UCS-2SET FILE UCS BYTE-ORDER { BIG-ENDIAN, LITTLE-ENDIAN } Whether to write a Byte Order Mark when creating a UCS-2 file.SET FILE UCS BOM { ON, OFF } performance. change the disk output buffer size; this might make a difference in slower. The optional size parameter after BUFFERED or UNBUFFERED lets you cached disk writes are not lost in a crash, but will probably also be Unbuffered writes might be useful in critical applications to ensure that systems but might also be risky, depending on the underlying file service. blocking writes are normal. Nonblocking writes might be faster on some Lets you control the disk output buffer for incoming files. BufferedSET FILE OUTPUT { { BUFFERED, UNBUFFERED } [ size ], BLOCKING, NONBLOCKING } see SET SEND PATHNAMES and SET RECEIVE PATHNAMES. LITERAL means use filenames literally (useful between like systems). Also (e.g. lowercase to uppercase, extra periods changed to underscore, etc). File names are normally CONVERTED to "common form" during transmissionSET FILE NAMES { CONVERTED, LITERAL } is in binary mode. AUTO (the default) means DISCARD if transfer is in text mode, KEEP if it What to do with an incompletely received file: KEEP (default), or DISCARD.SET FILE INCOMPLETE { AUTO, KEEP, DISCARD } Use this command to specify nonstandard line terminators for text files.SET FILE END-OF-LINE { CR, CRLF, LF } received files go into your current directory. The directory into which all received files should be placed. By default,SET FILE DOWNLOAD-DIRECTORY [ ] NONE No file transfer display at all. This requires a terminal or terminal emulator. FULLSCREEN A fully formatted 24x80 screen showing lots of information. This format can be used on any video display terminal. CRT Numbers are continuously updated on a single screen line. SERIAL One dot is printed for every K bytes transferred. BRIEF A line per file, showing size, mode, status, and throughput. transfer. The choices are: Selects the format of the file transfer display for local-mode fileSET FILE DISPLAY option NOWHERE: Do not put incoming files anywhere (use for calibration). SCREEN: Display incoming files on screen (local mode only). PRINTER: Send incoming files to SET PRINTER device. DISK (default): Store incoming files on disk.SET FILE DESTINATION { DISK, PRINTER, SCREEN, NOWHERE } UPDATE - Accept the incoming file only if newer than the existing file. RENAME - Give the incoming file a unique name. DISCARD - Refuse and/or discard the incoming file. APPEND - Append the incoming file to the end of the existing file. OVERWRITE - Overwrite (replace) the existing file. the incoming file under the name it was sent with. BACKUP (default) - Rename the old file to a new, unique name and store an existing file. The options are: Tells what to do when a file arrives that has the same name asSET FILE COLLISION option Type SET FILE CHAR ? for a complete list of file character sets. UTF-8 is the serialized form of the Universal Character Set. UCS-2 is the 2-byte form of the Universal Character Set. Kanji character sets. JAPANESE-EUC, JIS7-KANJI, DEC-KANJI, and SHIFT-JIS-KANJI are Japanese ELOT-927 is like ASCII with the lowercase letters replaced by Greek. GREEK-ISO is ISO 8859-7 Latin/Greek. CP869 is the Greek PC code page. HEBREW-7 is like ASCII with the lowercase letters replaced by Hebrew. HEBREW-ISO is ISO 8859-8 Latin/Hebrew. CP862 is the Hebrew PC code page. page used in Bulgaria SHORT-KOI is a 7-bit ASCII coding for Cyrillic. BULGARIA-PC is a PC code KOI-CYRILLIC, CYRILLIC-ISO, and CP866 are 8-bit Cyrillic character sets. Roman letters. Mazovia is a PC code page used in Poland. LATIN2 is ISO 8859-2 for Eastern European languages that are written with The CPnnn sets are for PCs. MACINTOSH-LATIN is for the Macintosh. NEXT is the 8-bit character set of the NeXT workstation. for Western European languages. national character sets. LATIN1 is the 8-bit ISO 8859-1 Latin Alphabet 1 The names ITALIAN, PORTUGUESE, NORWEGIAN, etc, refer to 7-bit ISO-646 Tells the encoding of the local file, ASCII by default.SET FILE CHARACTER-SET name Normally 8. If 7, truncate the 8th bit of all file bytes.SET FILE BYTESIZE { 7, 8 } binary pattern, the prevailing SET FILE TYPE is used. in text mode when FILE PATTERNS is ON; if a file does not match a text orSET FILE TEXT-PATTERNS [ [ ... ] ] of pattern syntax. SHOW PATTERNS to see the current file pattern lists. in binary mode when FILE PATTERNS are ON. HELP WILDCARDS for a description Zero or more filename patterns which, if matched, cause a file to be sentSET FILE BINARY-PATTERNS [ [ ... ] ] packets and like OFF otherwise. mode. AUTO (the default) is like ON if the other Kermit accepts Attribute in text or binary mode. OFF means to send all files in the prevailing ON means to use filename pattern lists to determine whether to send a fileSET FILE PATTERNS { ON, OFF, AUTO } When TRANSFER MODE is MANUAL, the FILE TYPE setting takes precedence. /BINARY or /TEXT switch in the SEND, GET, or RECEIVE command. the FILE TYPE setting but can, themselves, be superseded by including a "kindred-spirit" recognition, or source file record format) supersede filename pattern matching (see SET FILE PATTERNS below), client/server is transferred in text or binary mode; these methods (which might include methods (depending on the platform) are used to determine whether a file When TRANSFER MODE is AUTOMATIC (as it is by default), various automatic the corresponding file type at the receiver as well. to an ancient or non-Columbia Kermit implementation, you might need to set of the file type automatically. However, when sending files from C-Kermit byte. In most modern Kermit programs, the file sender informs the receiver whenever you wish to duplicate the original contents of the file, byte for BINARY with TRANSFER MODE MANUAL for executable programs or binary data or conversion if TRANSFER MODE is MANUAL, which is not the default. Use between unlike platforms (such as UNIX and Windows), or BINARY for no and character set, which is usually needed when transferring text files of any other indication. TYPE can be TEXT for conversion of record format How file contents are to be treated during file transfer in the absenceSET FILE TYPE { TEXT, BINARY }TRANSFER and SET PROTOCOL.Sets file-related parameters. Use SHOW FILE to view them. Also see SETSyntax: SET FILE parameter value complete list of possibilities. numeric code value of the handshake character. Type SET HANDSH ? for a other names like BELL or ESC, or use SET HANDSHAKE CODE to specify the before sending its next packet. Default is NONE; you can give one of the transfer. C-Kermit waits for this character from the other computer Character to use for half duplex line turnaround handshake during fileSyntax: SET HANDSHAKE { NONE, XON, LF, BELL, ESC, CODE number } Default is 0. a NAK while waiting for a command packet. Specify 0 for no NAKs at all. Server command wait timeout interval, how often the C-Kermit server issuesSET SERVER TIMEOUT n at a time; C-Kermit does not support multiple user/password pairs. is no longer required. Only one SET SERVER LOGIN command can be in effect account is ignored. If you enter SET SERVER LOGIN by itself, then login the server will respond to any commands other than REMOTE LOGIN. The Sets up a username and optional password which must be supplied beforeSET SERVER LOGIN [ username [ password [ account ] ] ] slows down the server too much. out. ON by default; turn it OFF if it causes trouble with the client or time to produce any output and therefore might cause the operation to time REMOTE HOST commands, which is useful in case the command takes a long Tells whether C-Kermit should send "keepalive" packets while executingSET SERVER KEEPALIVE {ON,OFF} NOTE: SERVER IDLE-TIMEOUT and SERVER TIMEOUT are mutually exclusive. Idle time limit while in server mode, 0 for no limit.SET SERVER IDLE-TIMEOUT seconds Default is no GET-PATH, so C-Kermit looks only in its current directory. from client GET commands when the names are not fully specified pathnames. Tells the C-Kermit server where to look for files whose names it receivesSET SERVER GET-PATH [ directory [ directory [ ... ] ] ] file transfer display on the screen. Default is OFF. Tells whether local-mode C-Kermit during server operation should put aSET SERVER DISPLAY {ON,OFF} Synonym: SET CD MESSAGE FILE . To specify more than one filename to look for, use {{name1}{name2}..}. READ.ME (SHOW SERVER tells the current CD-MESSAGE FILE name). Tells the name of the file to be displayed as a CD-MESSAGE, such asSET SERVER CD-MESSAGE FILE name (or similar) file to your screen. command, should send the contents of the new directory's READ.ME Tells whether the server, after successfully executing a REMOTE CDSET SERVER CD-MESSAGE {ON,OFF}for example, RDIR for REMOTE DIR, RCD for REMOTE CD, etc.All REMOTE commands except LOGIN and LOGOUT have R-command shortcuts;further information about a particular remote command 'x'.see a list of available remote commands. Type HELP REMOTE x to getmode on the other end of the currently selected line. Type REMOTE ? toto a Kermit server. There should already be a Kermit running in serverThe REMOTE command sends file management instructions or other commandsAlso see HELP WILDCARD (for IF MATCH pattern syntax). IF < \%x 10 { ECHO It's less } ELSE { ECHO It's not less }It can also include an ELSE part on the same line if braces are used: ELSE echo It's not less IF < \%x 10 ECHO It's lessThe IF command may be followed on the next line by an ELSE command. Example: FALSE - always fails TRUE - always succeeds (number by itself) - fails if the number is 0, succeeds otherwise >= n1 n2 - n1 is arithmetically greater than or equal to n2 > n1 n2 - n1 is arithmetically greater than n2 <= n1 n2 - n1 is arithmetically less than or equal to n2 < n1 n2 - n1 is arithmetically less than n2 = n1 n2 - n1 and n2 (numbers or variables containing numbers) are equal LGT s1 s1 - s1 is lexically (alphabetically) greater than s2 LLT s1 s2 - s1 is lexically (alphabetically) less than s2 EQUAL s1 s2 - s1 and s2 (character strings or variables) are equal greater than zero (see SET COUNT) COUNT - subtract one from COUNT, execute the command if the result is OPEN CONNECTION - A connection is open OPEN { READ-FILE,SESSION-LOG,...} - The given file or log is open NEWER file1 file2 - The 1st file is newer than the 2nd one WRITEABLE filename - Succeeds if the file is writeable READABLE filename - Succeeds if the file is readable DIRECTORY string - The string is the name of a directory ABSOLUTE filename - The filename is absolute, not relative EXIST filename - The named file exists NUMERIC variable or constant - The variable or constant is numeric DEFINED variablename or macroname - The named variable or macro is defined COMMAND word - Succeeds if word is built-in command FLOAT number - Succeeds if floating-point number MATCH string pattern - Succeeds if string matches pattern AVAILABLE SSL - SSL/TLS authentication is available AVAILABLE SRP - SRP authentication is available AVAILABLE NTLM - NTLM authentication is available AVAILABLE KERBEROS5 - Kerberos 5 authentication is available AVAILABLE KERBEROS4 - Kerberos 4 authentication is available AVAILABLE CRYPTO - Encryption is available EMULATION - Succeeds if executed while in CONNECT mode ASKTIMEOUT - The most recent ASK, ASKQ, GETC, or GETOK timed out ALARM - SET ALARM time has passed REMOTE-ONLY - C-Kermit was started with the -R command-line option FOREGROUND - C-Kermit is running in the foreground BACKGROUND - C-Kermit is running in the background FLAG - Succeeds if SET FLAG ON, fails if SET FLAG OFF ERROR - Synonym for FAILURE FAILURE - The previous command failed OK - Synonym for SUCCESS SUCCESS - The previous command succeededThe conditions are: IF ( EXIST oofa.txt || = \v(nday) 3 ) { , , ... } IF ( EXIST oofa.txt || = \v(nday) 3 ) IF EXIST oofa.txt Examples:conditions separated by AND (&&) or OR (||) and enclosed in parentheses.enclosed in braces. The condition can be a single condition or a group ofcan be a single command, or a list of commands separated by commas andIf the condition is (is not) true, do the commandlist. The commandlistSyntax: IF [NOT] condition commandlistAlse see: HELP FUNCTION EVAL. to choose the old or new behavior, which is NEW by default. (no variable), and the result was printed. Use SET EVAL { OLD, NEW } NOTE: Prior to C-Kermit 7.0, the syntax was "EVALUATE expression" EVALUATE \%n (1+1) * (\%a / 3). traditional notation. Operators include +-/*(), etc. Example: functions, combined with mathematical operators and parentheses in The expression can contain numbers and/or numeric-valued variables or Evaluates the expression and assigns its value to the given variable.Syntax: EVALUATE variable expression Obsolete. Same as IF (see HELP IF).Syntax: XIF condition { commandlist } [ ELSE { commandlist } ] Example: FOR \%i 10 1 -1 { pause 1, echo \%i } number of times given by the initial value, final value and increment. FOR loop. Execute the comma-separated commands in the commandlist theSyntax: FOR variablename initial-value final-value increment { commandlist } IF commands. commandlist while the condition is true. Conditions are the same as for WHILE loop. Execute the comma-separated commands in the bracketedSyntax: WHILE condition { commandlist }for information about patterns.invocation, a pattern, or any combination of these. See HELP WILDCARDSThe case label "x" can be a character, a string, a variable, a function :default, command, command, ... not match any of the labels: case-list, you can put a "default" label to catch when the variable does where "x" is a possible value for the variable. At the end of the :x, command, command, ..., break The case-list is a series of lines like these: Selects from a group of commands based on the value of a variable.Syntax: SWITCH { case-list } OPEN !READ sort foo.bar OPEN READ oofa.txt from or write to a system command rather than a file. Examples: specified mode: READ, WRITE, or APPEND. !READ and !WRITE mean to read For use with READ and WRITE commands. Open the local file in theSyntax: OPEN mode filenameAlso see SET ASK-TIMER. To include a question mark, precede it by backslash (\). Use braces to preserve leading and/or trailing spaces in the prompt. The characters that you type do not echo on the screen. Issues the prompt and defines the variable to be whatever you type in.Example: ASKQ \%p { Password:}Syntax: ASKQ variablename [ prompt ]Example: ASK \%n { What is your name\? }Syntax: ASK variablename [ prompt ] Issues the prompt and sets the variable to the first character you type.Example: GETC \%c { Type any character to continue...}Syntax: GETC variablename [ prompt ] untimed ASKs after a timed one, use SET ASK-TIMER 0. Also see IF ASKTIMEOUT. seconds with no response. This command is "sticky", so to revert to greater than 0, these commands will time out after the given number of For use with ASK, ASKQ, GETOK, and GETC. If ASK-TIMER is set to a numberSyntax: SET ASK-TIMER number SET BLOCK-CHECK \%b ECHO Today is \%aThese variables can be used almost anywhere, for example: DEFINE \%b 3 DEFINE \%a MondayThe definition of a variable can be anything at all, for example:the macro, or just type its name, followed optionally by arguments.comma-separated list of Kermit commands. Use the DO command to executewhich defines a Kermit command macro called 'vax'. The definition is a DEFINE vax set parity even, set duplex full, set flow xon/xofffor example: DEFINE name command, command, command, ...A typical macro definition looks like this: the definition is omitted, then the named variable or macro is undefined. names are included, rather than their values (compare with ASSIGN). If if the definition includes any variable or function references, their literally. No expansion or evaluation of the definition is done. Thus Defines a macro or variable. Its value is the definition, takenSyntax: DEFINE name [ definition ] This prints 'goodbye hello'. ECHO \%x \%y DEFINE \%a goodbye ASSIGN \%y \%a DEFINE \%x \%a DEFINE \%a hello names. Compare with DEFINE. To illustrate the difference, try this: the values of any variables are contained are used, rather than their The definition string is fully evaluated before it is assigned, so that Assigns the current value of the string to the variable (or macro).Example: ASSIGN \%a My name is \%b.Syntax: ASSIGN variablename string.Examples: DECR \%a, DECR \%a 7, DECR \%a \%n instead. is numeric. If the number argument is given, subtract that number Decrement (subtract one from) the value of a variable if the current valueSyntax: DECREMENT variablename [ number ]Examples: INCR \%a, INCR \%a 7, INCR \%a \%n numeric. If the number argument is given, add that number instead. Increment (add one to) the value of a variable if the current value isSyntax: INCREMENT variablename [ number ] printer. See HELP PRINT for further info. is omitted the default value is restored. SHOW PRINTER lists the current enclosed in braces, e.g. "set printer {| lpr -Plaser}". If the argument given file. If the SET PRINTER argument contains spaces, it must be PRINT command. If a filename is given, each PRINT command appends to the Specifies the command (such as "|lpr") or filename to be used by theSyntax: SET PRINTER [ { |command, filename } ] it is never requested. The default is ON. When EXIT WARNING is ALWAYS, confirmation is always requested. When OFF before EXITing if a connection to another computer might still be open. When EXIT WARNING is ON, issue a warning message and ask for confirmationSyntax: SET EXIT WARNING { ON, OFF, ALWAYS } constant, variable, function result, or arithmetic expression. Set C-Kermit's program return code to the given number, which can be aSyntax: SET EXIT STATUS number is terminated either by the host or by issuing a HANGUP command. When ON, C-Kermit EXITs automatically when a network connectionSyntax: SET EXIT ON-DISCONNECT { ON, OFF } fails, otherwise it succeeds. Synonym: SLEEP. the keyboard unless SLEEP CANCELLATION is OFF. If interrupted, PAUSE second is used. The pause can be interrupted by typing any character on current time, it is assumed to be tomorrow. If no argument given, one day in 24-hour hh:mm:ss notation. If the time of day is earlier than the Do nothing for the specified number of seconds or until the given time ofExample: PAUSE 3 or PAUSE 14:52:30Syntax: PAUSE [ { number-of-seconds, hh:mm:ss } ] 100 milliseconds. Do nothing for the specified number of milliseconds; if no number given,Example: MSLEEP 500Syntax: MSLEEP [ number ] this is usually EXIT or QUIT or LOGOUT) to return to Kermit. system's command line interpreter or shell; exit from it (the command for displays the results on the screen. If the command is omitted, enters the Gives the command to the local operating system's command processor, andSyntax: !, @, RUN, PUSH, or SPAWN, optionally followed by a command. XMIT. See HELP SET TRANSMIT for further information. starting a text editor. TRANSMIT may be interrupted by Ctrl-C. Synonym: must put the other computer in data collection mode, for example by correctly and completely. Before you start the TRANSMIT command, you There can be no guarantee that the other computer will receive the file /TEXT). to disable character-set translation in text mode (/TRANSPARENT implies CHARACTER-SET settings when TRANSMIT is in text mode. Include /TRANSPARENT Character sets are translated according to your current FILE and TERMINAL feedback required. the next line. In binary mode, it is sent a character at a time, with no your keyboard), and C-Kermit waits for a linefeed to echo before sending with carriage return at the end of each line (as if you were typing it at changing the global setting. In text mode, it is sent a line at a time, TEXT), which you can override with a /BINARY or /TEXT switch without The file is sent according to your current FILE TYPE setting (BINARY or the /COMMAND switch is included, the name of a command whose output is filename is the name of a single file (no wildcards) to be sent or, if (or if C-Kermit is in remote mode, displays it on the screen). The to the computer on the other end of your SET LINE or SET HOST connection Sends the contents of a file, without any error checking or correction,Syntax: TRANSMIT { /COMMAND, /TEXT, /BINARY, /TRANSPARENT } filename TRANSLATE lasagna.lat latin1 italian lasagna.nrc is chosen automatically, if necessary. Synonym: XLATE. Example: is displayed on the screen. An appropriate intermediate character-set C-Kermit's file character sets. If file2 is omitted, the translation and stores the result in file2. The character sets can be any of Translates file1 from the character set cs1 into the character set cs2Syntax: TRANSLATE file1 cs1 cs2 [ file2 ] ri = Ring Indicate. cts = Clear To Send; dsr = Dataset Ready; cd = Carrier Detect;Signals: from the keyboard during the waiting period. Also see HELP PAUSE. Sets FAILURE if the signals do not appear in the given time or interrupted the specified modem signals to appear on the serial communication device. Waits up to the given number of seconds or the given time of day for all wait 23:59:59 cd wait 5 cd ctsSyntax: WAIT { number-of-seconds, hh:mm:ss } [modem-signal(s)] TRANSACTION-LOG SESSION-LOG SCREEN (compare with ECHO) PACKET-LOG FILE (the OPEN WRITE, OPEN !WRITE, or OPEN APPEND file, see HELP OPEN) ERROR (standard error) DEBUG-LOG appropriate code. The name parameter can be any of the following: backslash codes, and is not terminated by a newline unless you include the Writes the given text to the named log or file. The text text may includeSyntax: WRITE name text for further info. portable-format entries based on your locale. HELP DIAL, HELP SET DIAL entry is shown, along with any transformations that would be applied to specified in the most recent SET DIAL DIRECTORY command. Each matching Looks up the given name in the dialing directory or directories, if any,Syntax: LOOKUP name HELP SET MODEM for more info. commands will automatically put it (back) in originate mode. SHOW MODEM, The ANSWER command puts the modem in autoanswer mode. Subsequent DIAL until interrupted, otherwise Kermit waits the given number of seconds. required. If is 0 or not specified, Kermit waits forever or Waits for a modem call to come in. Prior SET MODEM TYPE and SET LINESyntax: ANSWER [ ]Specify your dialing directory file(s) with the SET DIAL DIRECTORY command.country code and area code (see HELP SET DIAL).long-distance, then international, based on its knowledge of your localKermit dials then in cheap-to-expensive order: internal, then local, thenthem until the call is completed; if the entries are in portable format,If more than one entry is found with the same name, Kermit dials all ofPORTABLE entries. If it does not start with +, it is dialed literally.the current locale (HELP SET DIAL for further info); these are calledarea code, and C-Kermit will try to handle these appropriately based onIf a phone number starts with +, then it must include country code and heise +49 (511) 535 2301 ; Verlag Heinz Heise BBS e-mail +1 (212) 555 4321 ; My electronic mailbox work 9876543 ; This is a comment name phonenumber ; commentsA dialing directory is a plain text file, one entry per line:entries.phone numbers in this kind of list can not be names of dialing directorybraces.) In this case, each number is tried until there is an answer. The(Each number is enclosed in braces and the entire list is also enclosed in dial {{7654321}{8765432}{+1 (212 555-1212}}You can also give a list of phone numbers enclosed in braces, e.g:letter, without any directory lookup.after the = to be sent literally to the modem, even if it starts with aIf the phonenumber starts with an equals sign ("="), this forces the partname is sent to the modem literally.the number or numbers associated with the name. If it is not found, thelooks it up in the given file(s); if it is found, the name is replaced byDIRECTORY command to specify one or more dialing-directory files, KermitIf the phonenumber starts with a letter, and if you have used the SET DIAL REDIAL, and PDIAL. then DIAL. See also SET DIAL, SET MODEM, SET LINE, SET HOST, SET SPEED, If the modem is on a network modem server, SET HOST first, then SET MODEM, DIAL 7654321 number, for example: SET LINE, then SET SPEED. Then give the DIAL command, including the phone Dials a number using an autodial modem. First you must SET MODEM TYPE, thenExample: DIAL 7654321Syntax: DIAL phonenumber encryption. See HELP SET TELNET for more info. available to require a secure authentication method and bidirectional is resumed. Depending on how Kermit has been built switches may be IF SUCCESS CONNECT. If host is omitted, the previous connection (if any) Equivalent to SET NETWORK TYPE TCP/IP, SET HOST host [ service ] /TELNET,Syntax: TELNET [ switches ] [ host [ service ] ] primarily as a debugging tool for the expert user. be detected until the second send is attempted. This command is meant TELOPT NOP is sent twice because the failure of the connection will not if fail stop 1 Connection lost telopt nop ... set host xyzcorp.com e.g.: nondestructive "probes" to see if the Telnet session is still open; certain commands do not require a response, and therefore can be used as This command lets you send all the Telnet protocol commands. Note that WILL [ option ], WONT [option] } SUSP, SB [ option ], DO [ option ], DONT [ option ],TELOPT { AO, AYT, BREAK, CANCEL, EC, EL, EOF, EOR, GA, IP, DMARK, NOP, SE,and many more.details. These include \fdimension(), \farraylook(), \ffiles(), \fsplit(),Various functions are available for array operations; see HELP FUNCTION for in ascending order. Sort in reverse order. If this switch is not given, the array is sorted /REVERSE instead of the /RANGE switch. elements 0 through n). You can use a range specifier in the array name a sort, use /RANGE:0 (to sort the whole array) or /RANGE:0:n (to sort :high is omitted, the dimensioned size is used. To include element 0 in is not given, elements 1 through the dimensioned size are sorted. If The range of elements, low through high, to be sorted. If this switch /RANGE:low[:high] Specifies a numeric rather than lexical sort. /NUMERIC Position (1-based column number) at which comparisons begin, 1 by default. /KEY:number omitted, the current SET CASE setting applies. If ON, alphabetic case matters; if OFF it is ignored. If this switch is /CASE:{ON,OFF} to the first one. Switches: optional. If a second array name is given, that array is sorted according the array is excluded from sorting by default. The ARRAY keyword is Sorts the given array lexically according to the switches. Element 0 of[ ARRAY ] SORT [ switches ] array-name [ array2 ] automatically. Range specifiers may be given on one or both arrays. Copys array1 to array2. If array2 has not been declared, it is createdARRAY COPY array1 array2 elements are discarded; if it is larger, new empty elements are added. number given. If the number is smaller than the current size, the extra Changes the size of the given array, which must already exist, to theARRAY RESIZE arrayname number Destroys and undeclares the given array.ARRAY DESTROY arrayname range to set a segment of the array, e.g. "array set \%a[2:9] 0" Sets all elements of the array to the given value. You may specify aARRAY SET arrayname value than the whole array, e.g. "array clear \%a[22:38]" You may include a range specifier to clear a segment of the array rather Clears all elements of the array, i.e. sets them to empty values.ARRAY CLEAR arrayname contents is not shown. Synonym: SHOW ARRAY. If the arrayname is omitted, all declared arrays are listed, but their included to display a segment of the array, e.g. "array show \&a[1:24]." Displays the contents of the given array. A range specifier can beARRAY SHOW [ arrayname ] existed. The ARRAY keyword is optional. Synonym: [ ARRAY ] DCL. if none are given the array is destroyed and undeclared if it already omit the size, the array is sized according to the number of initializers; including = followed by one or more values separated by spaces. If you variables. Initial values can be given for elements 1, 2, ... by elements, 0 through n. Array elements can be used just like any other Declares an array of the given size, n. The resulting array has n+1[ ARRAY ] DECLARE arrayname[n] [ = initializers... ]The following ARRAY verbs are available:at all -- a number, a character, a string, a filename, etc.or an arithmetic expression. The value of an array element can be anythingwhere "a" is a letter and n is a number or a variable with a numeric value \&a[n]the following syntax:Declares arrays and performs various operations on them. Arrays haveSyntax: ARRAY verb operands... Convert to Base64 encoding while copying. /TOB64 Convert from Base64 encoding while copying. /FROMB64 Swap bytes while copying. /SWAP-BYTES Copy silently (default). Synonyms: /NOLOG, /QUIET /NOLIST Print the filenames and status while copying. Synonyms: /LOG, /VERBOSE /LIST supported. Switches: directory. Only one file at a time may be copied; wildcards are not is a directory, this command copies file1 under its own name to the given Copies the source file (file1) to the destination file (file2). If file2Syntax: COPY [ switches ] file1 file2 Rename silently (default). Synonyms: /NOLOG, /QUIET Print the filenames and status while renaming. Synonyms: /LOG, /VERBOSE directory. Only one file at a time may be renamed; wildcards are not is a directory, this command moves file1 under its own name to the given Renames the source file (file1) to the destination file (file2). If file2Syntax: RENAME [ switches ] file1 file2Service Daemon (IKSD). Type "help iksd" for details.At present, most of the extended options apply only to the Internet Kermitis the option keyword.particular extended option, type "help extended-option xxx", where "xxx"extended options, type "help extended-options". To get help about aextended options, type "help extended-options ?". To get help about allthe built-in banner (greeting) text. To obtain a list of availablewhich designates the file oofa.txt to be printed upon startup, rather than kermit --banner:oofa.txtother extended-option keywords. Example:and they can be abbreviated to any length that still distinguishes them fromUnlike single-letter options, extended option keywords aren't case sensitivehas arguments, a colon (:) or equal sign (=) followed by the argument.These begin with two dashes, followed by a keyword, and then, if the optionC-Kermit also offers a selection of "extended command-line" options.Type "help option x" to see the help message for option x.Type "help options all" to list all the command-line options. name or number. . the -j and -J options allow an optional second argument, the TCP port . The -s option can accept multiple filenames, separated by spaces. automatically in this case. in the argument-vector arrays. The initialization file is not executed Kermit but made available to the script as \%1, \%2, ..., as well as and \&_[0]. All subsequent command-line arguments are to be ignored by file follows. This file is to be executed, and its name assigned to \%0 . A similar option "+" (plus sign) means: the name of a Kermit script items on the command line, and also in the top-level \%1..\%9 variables. data is placed in the argument vector array, \&@[], along with the other treat the rest of the command line as data, rather than commands; this . The special option "=" (equal sign) or "--" (double hyphen) means to from the file. Additional command-line options can follow the filename. . If the first command-line option is a filename, Kermit executes commandsExceptions to the rules: kermit -Qis oofa.exeAn option that does not require an argument can be bundled with other options: kermit -s "filename with spaces"must be enclosed in doublequotes:require an "argument," others do not. If an argument contains spaces, itCommand-line options are single characters preceded by dash (-). Someissues its prompt.options were given, C-Kermit enters its interactive command parser andafter executing its command-line options. If -S is included, or no actionIf any "action options" are included on the command line, C-Kermit exitsCommand-line options are case-sensitive; "-s" is different from "-S".tells C-Kermit to send (-s) the file oofa.exe in binary (-i) mode. kermit -i -s oofa.execommand that you use to start C-Kermit. Example:Command-line options are given after the program name in the systemExtended argument without the "--" prefix %s %s %s %s UVS1̏~&=~=~(,5ȧh zh5,h0JÃuph 1ۃ}6v|-4Bh 4h 1e[^A command-line option character, or the word ALL, or carriage return for an overviewallALL?A single character, please, or carriage to list them all. The following command-line options are available: (action option) -%c %s %s Argument: %s -%c %s%s Argument: (none) UWVSEE5ȧEPh zhD2E8u E?uftuju EEE8-uE}u10}H~hn }t!EEEuu E!裌~&=~=~(,h 1ۿ}t@,N8t1Phu G(9~R1C}uÃ}th? }9]<`< tO z for information about each one. \F_errmsg() -- Error message from most recent FILE command or function \F_putblock() -- Write block \F_putline() -- Write line \F_putchar() -- Write character \F_getblock() -- Read block \F_getline() -- Read line \F_getchar() -- Read character \F_status() -- Get channel status \F_handle() -- Get file handle \F_line() -- Get channel read/write position (line number) \F_pos() -- Get channel read/write position (byte number) \F_eof() -- Check if channel is at EOFThe following functions are related to the FILE command: \v(f_count) -- Result of most recent FILE COUNT command \v(f_error) -- Completion code of most recent FILE command or function \v(f_max) -- Maximum number of files that can be open at onceThe following variables are related to the FILE command:type HELP FILE CLOSE or HELP FCLOSE for details about FILE CLOSE, and so on.Type HELP FILE OPEN or HELP FOPEN for details about FILE OPEN; FILE FLUSH (or FFLUSH) -- Flush output buffers for an open file. FILE SEEK (or FSEEK) -- Seek to specified spot in an open file. FILE COUNT (or FCOUNT) -- Count lines or bytes in an open file FILE REWIND (or FREWIND) -- Rewind an open file FILE STATUS (or FSTATUS) -- Show status of a channel. FILE LIST (or FLIST) -- List open files. FILE WRITE (or FWRITE) -- Write data to an open file. FILE READ (or FREAD) -- Read data from an open file. FILE CLOSE (or FCLOSE) -- Close an open file. FILE OPEN (or FOPEN) -- Open a local file.The FILE commands are: Opens, closes, reads, writes, and manages local files.Syntax: FILE [ switches ] [ ]underlying operating system.Switches can be combined in an way that makes sense and is supported by the This option is ignored in UNIX. positioned at the end. If the file exists, open it for writing, but with the write pointer If the file does not exist, create a new file and open it for writing./APPEND at the beginning of the file. writing is allowed. In both cases, the read/write pointer is initially a new file. If /READ was specifed, the existing file is preserved, but Open the file for writing. If /READ was not also specified, this creates/WRITE Open the file for reading./READ Synonym: FOPEN. Switches: assigns a channel number for the file to the given variable. switches, if any, or if no switches are included, in read-only mode, and Opens the file indicated by in the mode indicated by theSyntax: FILE OPEN [ switches ] Also see HELP FILE OPEN. Synonym: FCLOSE. Closes the file on the given channel if it was open.Syntax: FILE CLOSE Also available as \F_flush(). all material previously written to be committed to disk. Synonym: FFLUSH. Flushes output buffers on the given channel if it was open, forcingSyntax: FILE FLUSH with FILE OPEN. Synonym: FLIST. Lists the channel number, name, modes, and position of each file openedSyntax: FILE LISTAlso available as \F_getchar(), \F_getline(), \F_getblock().Synonym: FREAD. empty, this indicates a NUL byte was read. Equivalent to /SIZE:1. If FILE READ /CHAR succeeds but the is/CHARACTER variable without any editing. contain lines. The resulting block of characters is assigned to the This gives a semblance of "record i/o" for files that do not necessarily Specifies that the given number of bytes (characters) is to be read./SIZE:number is assumed. variable. If no switches are included with the FILE READ command, /LINE The line terminator (if any) is removed before assigning the text to the UNIX a line is a sequence of characters up to and including a linefeed. to the underlying operating system's text-file format. For example, in Specifies that a line of text is to be read. A line is defined according/LINE be taken literally. Synonym: FREAD. Switches: variable or array element if you want backslash characters in the file to the screen. The variable should be a macro name rather than a \%x if one was given; if no variable was given, the result is printed on Reads data from the file on the given channel number into the ,Syntax: FILE READ [ switches ] [ ] Also available as \F_rewind(). the file. Equivalent to FILE SEEK 0. Synonym: FREWIND. If the channel is open, moves the read/write pointer to the beginning ofSyntax: FILE REWIND the end of the file. Synonym: FSEEK. Also available as \F_seek(). is absolute; a signed number is relative. EOF means to move to If neither the /RELATIVE nor /ABSOLUTE switch is given, an unsigned file. Subsequent FILE READs or WRITEs will take place at that position. Moves the file pointer for this file to the given position in the Switches are /BYTE, /LINE, /RELATIVE, ABSOLUTE.Syntax: FILE SEEK [ switches ] { [{+,-}], EOF } Synonym: FSTATUS switches it was opened with, and the current read/write position. If the channel is open, this command shows the name of the file, theSyntax: FILE STATUS to \v(f_count). Synonym: FCOUNT is given, the result is not printed. In all cases the result is assigned or lines in the file if at top level or if /LIST is included; if /NOLIST If the channel is open, this command prints the nubmer of bytes (default)Syntax: FILE COUNT [ { /BYTES, /LINES, /LIST, /NOLIST } ] Also available as \F_putchar(), \F_putline(), \F_putblock().Synonym FWRITE. is given. not given, a NUL character is written; otherwise the first character of Specifies that one character should be written. If the is empty or Specifies that the is to be written as-is, with no terminator added./STRING Like LPAD, but pads on the right./RPAD[:value] switch is ignored. write the indicated number of NUL bytes. If /SIZE was not given, this specified, 32 (the code for Space) is used. The value can also be 0 to whose ASCII value is given to write the given length. If no value is the text is padded on the left with sufficient copies of the character If /SIZE was given, but the is shorter than the requested size,/LPAD[:value] /BLOCK. if is shorter, it is padded according /LPAD and /RPAD switches. Synonym: If the given is longer than the requested size, it is truncated; Specifies that the given number of bytes (characters) is to be written. end of the . If no switches are included, /LINE is assumed. Specifies that an appropriate line terminator is to be added to the want to preserve them. Synonym: FWRITE. Switches: contain leading or trailing spaces, it must be enclosed in braces if you can be literal text or a variable, or any combination. If the text might Writes the given text to the file on the given channel number. The FILE WRITE [ switches ] OperationUS]5ȧh zh@5hL*Ã}tuVhVV $=0 (8F>6.&- $Th@O 5}hLP4qh\P4ehpP4YhO4MhP4AhP45hQ4)h$Q4hPQ4h8Q4]DOHELP xxSyntax: APC text Echoes the text within a VT220/320/420 Application Program Command.Describes how to get technical support.Syntax: BEEP Sends a BEL character to your terminal.Syntax: CHECK name Checks to see if the named feature is included in this version of C-Kermit. To list the features you can check, type "check ?".Syntax: COMMENT text Example: COMMENT - this is a comment. Introduces a comment. Beginning of command line only. Commands may also have trailing comments, introduced by ; or #.DELYour escape character is Ctrl-%c (ASCII %d, %s) Syntax: CD [ directoryname ] Change Directory. If directory name omitted, changes to your home directory. Also see HELP SET CD.Syntax: UNDEFINE variable-name Undefines a macro or variable.Syntax: PDIAL phonenumber Partially dials a phone number. Like DIAL but does not wait for carrier or CONNECT message.Redial the number given in the most recent DIAL commnd.Syntax: LS [ args ] Runs "ls" with the given arguments.Syntax: DISABLE command Security for the C-Kermit server. Prevents the client Kermit program from executing the named REMOTE command, such as CD, DELETE, RECEIVE, etc.Syntax: [ DO ] macroname [ arguments ] Executes a macro that was defined with the DEFINE command. The word DO can be omitted. Trailing argument words, if any, are automatically assigned to the macro argument variables \%1 through \%9.Syntax: ECHO text Displays the text on the screen, followed by a line terminator. The ECHO text may contain backslash codes. Example: ECHO \7Wake up!\7. Also see XECHO and WRITE SCREEN.Syntax: XECHO text Just like ECHO but does not add a line terminator to the text. See ECHO.Syntax: ENABLE capability For use with server mode. Allows the client Kermit program access to the named capability, such as CD, DELETE, RECEIVE, etc. Opposite of DISABLE.Syntax: END [ number [ message ] ] Exits from the current macro or TAKE file, back to wherever invoked from. Number is return code. Message, if given, is printed.Syntax: E-PACKET Sends an Error packet to the other Kermit.Syntax: QUIT (or EXIT) [ number ] Exits from the Kermit program, closing all open files and devices, optionally setting the program's return code to the given number. Also see SET EXIT.Syntax: FINISH Tells the remote Kermit server to shut down without logging out.Syntax: GETOK prompt Prints the prompt, makes user type 'yes', 'no', or 'ok', and sets SUCCESS or FAILURE accordingly. Also see SET ASK-TIMER.Syntax: GOTO label In a TAKE file or macro, go to the given label. A label is a word on the left margin that starts with a colon (:). Example: :oofa echo Hello! goto oofaSyntax: HANGUP Hang up the phone or network connection. %s, Copyright (C) 1985, 2000, Trustees of Columbia University in the City of New York. %s, Copyright (C) 1985, 2000,Give a brief introduction to C-Kermit.Syntax: REINPUT n string Looks for the string in the text that has recently been INPUT, set SUCCESS or FAILURE accordingly. Timeout, n, must be specified but is ignored. Introduces a label, like :loop, for use with GOTO in TAKE files or macros. See GOTO.Syntax: MAIL filename address Equivalent to SEND /MAIL /ADDRESS:xxx filename.MMOVE is exactly like MSEND, except each file that is sent successfully is deleted after it is sent. Prints news of new features since publication of "Using C-Kermit". New features are described in the file DOCS\UPDATES.TXT.Syntax: PING [ IP-hostname-or-number ] Checks if the given IP network host is reachable. Default host is from most recent SET HOST or TELNET command. Runs system PING program, if any.Syntax: FTP [ IP-hostname-or-number ] Makes an FTP connection to the given IP host or, if no host specified, to the current host. Uses the system's FTP program, if any.Syntax: PRINT file [ options ] Prints the local file on a local printer with the given options. Also see HELP SET PRINTER.Syntax: PWD Print the name of the current working directory.Syntax: READ variablename Reads a line from the currently open READ or !READ file into the variable (see OPEN).Remote commandSyntax: RETURN [ value ] Return from a macro. An optional return value can be given for use with \fexecute(macro), which allows macros to be used like functions.MOVE is exactly like SEND, except each file that is sent successfully is deleted after it is sent.Syntax: SUSPEND or Z Suspends Kermit. Continue Kermit with the appropriate system command, such as fg.ParameterHELP SET ySorry, help not available for "%s" Syntax: REDIRECT command Runs the given local command with its standard input and output redirected to the current SET LINE or SET HOST communications path. Synonym: < (Left angle bracket). Display current values of various items (SET parameters, variables, etc). Type SHOW ? for a list of categories.Syntax: SPACE Display disk usage in current device and/or directorySyntax: STATISTICS [/BRIEF] Display statistics about most recent file transferSyntax: STOP [ number [ message ] ] Stop executing the current macro or TAKE file and return immediately to the C-Kermit prompt. Number is a return code. Message printed if given.Syntax: TAKE filename Take Kermit commands from the named file. Kermit command files may themselves contain TAKE commands, up to a reasonable depth of nesting.Syntax: VERSION Displays the program version number.Syntax: WHO [ user ] Displays info about the user.WRITE-LINE (WRITELN) is just like WRITE, but includes a line terminator at the end of text. See WRITE.Like GOTO, but searches only forward for the label. See GOTO.Declares a variable to be local to the current macro or command file.View the terminal emulation screen even when there is no connection.Synonym for SET FILE TYPE TEXT.Synonym for SET FILE TYPE BINARY.Just like GET but asks the server to delete each file that has been sent successfully.Equivalent to SET PARITY NONE, SET COMMAND BYTE 8, SET TERMINAL BYTE 8.Syntax: SAVE KEYMAP Saves current keymap definitions to file, "keymap.ini" by default.Syntax: EDIT [ ] Starts your preferred editor on the given file, or if none given, the most recently edited file, if any. Also see SET EDITOR.Syntax: BROWSE [ ] Starts your preferred Web browser on the given URL, or if none given, the most recently visited URL, if any. Also see SET BROWSER.Syntax: CSEND [ switches ] [ ] Sends from the given rather than from a file. Equivalent to SEND /COMMAND; see HELP SEND for details.Syntax: CRECEIVE [ switches ] Receives to the given rather than to a file. Equivalent to RECEIVE /COMMAND; see HELP RECEIVE for details.Syntax: CGET Equivalent to GET /COMMAND; see HELP GET for details.Name of function?No such function - "%s" Syntax: KERMIT [command-line-options] Lets you give command-line options at the prompt or in a script. HELP OPTIONS for more info.Syntax: BACK Returns to your previous directory.Syntax: WHERE Tells where your transferred files went.Syntax: PIPE [ command ] Makes a connection through the program whose command line is given. Example: pipe rlogin xyzcorp.comSTATUS is the same as SHOW STATUS; prints SUCCESS or FAILURE for the previous command.Syntax: ASSERT Succeeds or fails depending on ; see HELP IF for s.Always fails.Always succeeds.If you haved logged in to C-Kermit as an Internet Kermit server, the LOGOUT command, given at the prompt, logs you out and closes your session.The Internet Kermit Service Daemon can be started only by the system administrator. The IKSD is documented separately.Closes all open files and logs.Syntax: SHIFT [ n ] Shifts \%1..9 variables n places to the left; default n = 1.Syntax: MANUAL [ topic ] Runs the "man" command on the given topic (default "kermit").RASG and RASSIGN are short forms of REMOTE ASSIGN.RCD and RCWD are short forms of REMOTE CD.RCOPY is a short form of REMOTE COPY.RDELETE is a short form of REMOTE RELETE.RDIRECTORY is a short form of REMOTE DIRECTORY.REXIT is a short form of REMOTE EXIT.RHELP is a short form of REMOTE HELP.RHOST is a short form of REMOTE HOST.RKERMIT is a short form of REMOTE KERMIT.RMKDIR is a short form of REMOTE MKDIR.RPRINT is a short form of REMOTE PRINT.RPWD is a short form of REMOTE PWD.QUERY and RQUERY are short forms of REMOTE QUERY.RRENAME is a short form of REMOTE RENAME.RRMDIR is a short form of REMOTE RMDIR.RSET is a short form of REMOTE SET.RSPACE is a short form of REMOTE SPACE.RTYPE is a short form of REMOTE TYPE.RWHO is a short form of REMOTE WHO.Syntax: EXEC [ [ [ ... ] ] C-Kermit overlays itself with the given system command and starts it with the given arguments. Upon any error, control returns to C-Kermit.Syntax: TRACE { /ON, /OFF } { ASSIGNMENTS, COMMAND-LEVEL, ALL } Turns tracing of the given object on or off. This command is not configured in this version of Kermit.UWS]Sh zhjB}^=tjjjjjuh.tCt;t3t+t#t+vtu SX$"&&&& '0'P'p''' (((())1)*11x***(*+)H++++@,P,`,1,,, -')&(,x))(P(p,(*14&D&$&))1(11--@(0-18+H**1@'(,P-111+p(*d&1'11(,11*h)&*X*T&0,@-11)h++`-`(p-h*t&X+8*x+'-''--*11,1`'1(*-h/-,1-0(11--. .0.&11@.P.1.(x//11/1P/1/11/1///1/1X000000011(1X1x1111181H101h1011\/00(080H0'@'x0h0h0h0111111@'1111111111111111hHf . h HV  hGF  h ho h 50 h h08 h4 hd h(5 =thP54@%Ph? hMj 2 hQ6 " hdLJ  h`H:  h h41 h0K h h hK hJ h0 h r hv b hf R hIz B hF 2 hh6 " h&  hy  h G* h! h_ h  h`G h5 h5 hr h r hv b _*T =t25hjjjjj55SD 5hP hT,2 ho hE h,I h.h4h hMhE zh6jhP7Zh ^JhD<r:h`<b*h .hGB hQ h h/hIhIh h h= h zh ~jh8;Z5ȧh zhn5lh( Sx,h}.h9B h$58<5<<5@<5<h5ȧh zh5$hpSh zhj8$Sog=tZ'O5T+.hIj2h,6"h&hdhhhhLh$LhIh7htGhGrhXJbhZfRh|JzBhF2hJZ"h&hTG:h,H*h*hihhhhh8h6hrhvbh3fRhVBhgF2h 6"h&jh zh5h̠Ãu u"\+:t :(tB:u\+:\uB:\uzftzFu:ft:FuBEP5Rh̠IÃ}5\+h&Fc t u H*$SH蛬h@hhh<h3hh hozh}~jhnZh^JhN:h`2b*h.h  h22hD3"hl3hbhhhhh@zhf~jhnZh^JhN:h>*h,.hP hhhhh hF h.hj h.!}h!qo!|h0=T+T+9T+w'8 uH9T+v8 t H9T+v@8 tPh请1e[_ %s U |uhh2{1ÐUWVS %9~&=~=~(,h!5u}E1ۋu8tyu4h0 purposes of More?-prompting. Informs C-Kermit of the number of rows in your command screen for theSET COMMAND HEIGHT entry and display of 8-bit characters. and your keyboard and screen. 7 is assumed. SET COMMAND BYTE 8 to allow Informs C-Kermit of the bytesize of the communication path between itselfSET COMMAND BYTESIZE { 7, 8 } command mode. ON by default. Enables/Disables automatic recognition of Kermit packets while inSET COMMAND AUTODOWNLOAD { ON, OFF }Syntax: SET COMMAND parameter value to display the CARRIER-WATCH setting. Kermit won't let you, use SET CARRIER-WATCH OFF. Use SHOW COMMUNICATIONS need to CONNECT to a serial device that is not asserting carrier, and capabilities of the underlying OS, drivers, devices, and cables. If you the DIAL command. Correct operation of carrier-watch depends on the AUTO (the default) means carrier is required at all times except during carrier is required at all times. OFF means carrier is never required. on serial communication (SET LINE or SET PORT) devices. ON means that Attempts to control treatment of carrier (the Data Carrier Detect signal)Syntax: SET CARRIER-WATCH { AUTO, OFF, ON } SET ATTR ALL OFF SET ATTR LENGTH ON SET ATTR DATE OFFYou can also specify ALL to select all of them. Examples: TYPE: The file's type (text or binary) SYSTEM-ID: Machine/Operating system of origin PROTECTION: The files protection (permissions) LENGTH: The file's length DISPOSITION: Unusual things to do with the file, like MAIL or PRINT DATE: The file's creation date CHARACTER-SET: The transfer character set for text files selected incoming file attributes, including: selected file attributes along with each file, and to handle or ignore Use this command to enable (ON) or disable (OFF) the transmission ofSyntax: SET ATTRIBUTES name ON or OFF inherited by subordinate command files. a command fails. This setting is local to the current command file, and Tells whether a TAKE command file should be automatically terminated whenSET TAKE ERROR { ON, OFF } with a line number). screen (if so, each command is shown at the time it is read, and labeled Tells whether commands read from a TAKE file should be displayed on theSET TAKE ECHO { ON, OFF } Controls behavior of TAKE command:Syntax: SET TAKE parameter valueType SHOW TERMINAL to see current terminal settings. Tells C-Kermit how many columns (characters) are on your CONNECT-mode screen.SET TERMINAL WIDTH additional information. without a string to cancel the current trigger. See HELP CONNECT for session, is to cause automatic return to command mode. Give this command Specifies a string that, when detected during any subsequent CONNECTSET TERMINAL TRIGGER Enables and disables host-initiated transparent printing in CONNECT mode.SET TERMINAL PRINT { ON, OFF } CR (press the Return or Enter key) in CONNECT mode. Tells whether to send CRLF (Carriage Return and Line Feed) when you typeSET TERMINAL NEWLINE-MODE { OFF, ON } switch between 7-bit and 8-bit characters during CONNECT. OFF by default. Tells C-Kermit whether to use Shift-In/Shift-Out (Ctrl-O and Ctrl-N) toSET TERMINAL LOCKING-SHIFT { OFF, ON } Tells C-Kermit how many rows (lines) are on your CONNECT-mode screen.SET TERMINAL HEIGHT Also see HELP SET ESCAPE. when the connection is closed by the other end. USE WITH EXTREME CAUTION. ESCAPE character. If you disable it, Kermit returns to its prompt only Turns on/off the ability to escape back from CONNECT mode using the SETSET TERMINAL ESCAPE-CHARACTER { ENABLED, DISABLED } Specifies which side does the echoing during terminal connection.SET TERMINAL ECHO { LOCAL, REMOTE } commands. SET TERMINAL DEBUG ON implies SET TELNET DEBUG ON. characters are displayed symbolically, rather than be taken as formatting Turns terminal session debugging on and off. When ON, incoming controlSET TERMINAL DEBUG { ON, OFF } on your screen. Specifies how incoming carriage return characters are to be displayedSET TERMINAL CR-DISPLAY { CRLF, NORMAL } no translation is done. during CONNECT. By default, both character sets are TRANSPARENT, and you specify two different character sets, C-Kermit translates between them the local character set, the current FILE CHARACTER-SET is used. When character set used by C-Kermit locally, . If you don't specify Specifies the character set used by the remote host, , and theSET TERMINAL CHARACTER-SET [ ] computer or service during CONNECT. Use 7- or 8-bit terminal characters between C-Kermit and the remoteSET TERMINAL BYTESIZE { 7, 8 } mode. Default is OFF. Kermit or ZMODEM packet of the appropriate type is received during CONNECT Enables/disables automatic switching into file-transfer mode when a validSET TERMINAL AUTODOWNLOAD { ON, OFF } all APCs. OFF is the default. and RUN. OFF prevents execution of APCs. UNCHECKED allows execution of disallows potentially dangerous commands such as DELETE, RENAME, OUTPUT, C-Kermit is in CONNECT mode. ON allows execution of "safe" commands and Controls execution of Application Program Commands sent by the host whileSET TERMINAL APC { ON, OFF, UNCHECKED } are running C-Kermit provides the emulation. workstation window, or the terminal emulator or terminal from which you computer or service you have made a connection to. Your console, (or a totally transparent one, if you configure it that way) to the include a terminal emulator. Instead, it is a "semitransparent pipe" This command is not available because this version of C-Kermit does notSET TERMINAL TYPE ...Syntax: SET TERMINAL parameter valueAlso see SET NETWORK, TELNET, SET TELNET.SET HOST name [ port ] /TELNET, IF SUCCESS CONNECTThe TELNET command is equivalent to SET NETWORK TYPE TCP/IP, SET HOST /CONNECT /COMMAND rlogin xyzcorp.com SET HOST xyzcorp.com 2000 /RAW-SOCKET SET HOST madlab.sprl.umich.edu 3000 SET HOST 128.59.39.2 SET HOST /SERVER * 1649 SET HOST * 1649 SET HOST /CONNECT kermit.columbia.edu SET HOST kermit.columbia.edu Send initial Telnet negotiations even if this is not a Telnet port. /TELNET This is a connection to a raw TCP socket. /RAW-SOCKET Do not send initial Telnet negotiations even if this is a Telnet port. /NO-TELNET-INITThe protocol-switches can be: This change is permanent. An empty is accepted. during TELNET NEW-ENVIRONMENT and TELNET AUTHENTICATION negotiations. Sets the value of (userid) to . This value is sent to the host Equivalent to SET LOGIN USER . /USERID:[] Enter server mode automatically if the connection is successful. /SERVER Enter CONNECT (terminal) mode automatically if the connection is successful. /CONNECT given system command, such as "rlogin" or "cu". a list. /NETWORK-TYPE:COMMAND means to make the connection through the type is used only for this connection. Type "set host /net:?" to see NETWORK TYPE name prior to SET HOST, except that the selected network Makes the connection on the given type of network. Equivalent to SET /NETWORK-TYPE:name different service. The first set of switches can be: TELNET; specify a different TCP port number or service name to choose a selected network type. For TCP/IP connections, the default service is Establishes a connection to the specified network host on the currentlySET HOST [ switches ] hostname-or-address [ service ] [ protocol-switch ] Sets defaults for the AUTHENTICATE command:Synatx: SET AUTHENTICATION from the entry, and then try all matching entries until one succeeds.given in the directory and, if found, fill in the additional itemswith the same name. SET HOST and TELNET commands look up theYou can have multiple network directories and you can have multiple entries name tcp/ip ip-hostname-or-address [ socket ] [ ; comment ] For TCP/IP, the format is: name network-type address [ network-specific-info ] [ ; comment ] network directory entry is: dialing directories (HELP DIAL for details). The general format of a Specifies the name(s) of zero or more network directory files, similar toSET NETWORK DIRECTORY [ file [ file [ ... ] ] ]SET HOST commands. Also see SET HOST, TELNET.If only one network type is listed above, that is the default network for SET NETWORK TYPE TCP/IP ; Internet: Telnet, Rlogin, etc. SET NETWORK TYPE COMMAND ; Make a connection through an external commandSelect the type of network to be used with SET HOST connections:Syntax: SET NETWORK { TYPE network-type, DIRECTORY [ file(s)... ] } such requests, this feature is OFF by default. port it should use. Since not all domain servers are set up to answer port other than 23, this feature allows C-Kermit to ask the host which example, if a host wants regular Telnet connections redirected to some host and port number upon which to find an advertised service. For Tells C-Kermit whether to try to use DNS SRV records to determine theSET TCP DNS-SERVICE-RECORDS {ON, OFF} addresses unless Kerberos support is installed. default, means the lookup is done on hostnames, but not on numeric IP which host you are connected to and you are not using Kerberos. AUTO, the option OFF for speedier connections if you do not need to know exactly time (minutes) to fail, but the connection will still be made. Turn this other host does not have a DNS entry, the reverse lookup could take a long Kerberos connections to host pools and for incoming connections. If the to, which is useful for connections to host pools, and is required for so Kermit can determine the actual hostname of the host it is connected Tells Kermit whether to perform reverse DNS lookup on TCP/IP connectionsSET TCP REVERSE-DNS-LOOKUP { AUTO, ON, OFF }The following TCP and/or IP parameter(s) may also be changed:the underlying TCP/IP services.all options are necessarily available in all Kermit versions; it depends onthen at your own risk. These settings are displayed by SHOW NETWORK. Notyou understand the concepts (see, for example, the Comer TCP/IP books), andthat Kermit is using is giving you inadequate performance, and then only ifshould use these commands only if you feel that the TCP/IP protocol stackbasis by adjusting parameters you normally would not have access to. YouThese items let you tune TCP networking performance on a per-connection TCP receive and send buffer sizes. (default is -1, use system defaults.)SET TCP SENDBUF SET TCP RECVBUF (default is OFF.) to accumulate a bunch of them before transmitting (Nagle Algorithm). ON means send short TCP packets immediately rather than waitingSET TCP NODELAY { ON, OFF } measured in 10ths of milliseconds. The default is ON with a timeout of 0. outstanding data has been transferred and acknowledged. The timeout is Setting this ON ensures that a connection doesn't close before allSET TCP LINGER { ON [timeout], OFF } (default is ON.) Setting this ON might help to detect broken connections more quickly.SET TCP KEEPALIVE { ON, OFF } Specify no to remove the preference. when using authentication or listening for an incoming connection. instead of allowing the TCP/IP stack to choose. This may be necessary This allows a specific IP Address on a multihomed host to be usedSET TCP ADDRESS SHOW TELNET displays current Telnet settings. Use SHOW TELOPT to view current Telnet Option negotiation settings. negotiation. before connecting to the problem host, thus skipping the problematic is possible to use SET TELOPT to instruct Kermit to REFUSE the option they do not recognize and instead do not respond at all. In this case it Note that some of Kermit's Telnet partners fail to refuse options that given, the command applies to the client. when Kermit is the Telnet client or the Telnet server; if no switch is /CLIENT or /SERVER switch to indicate whether the given policies apply appropriate (option-specific) default is applied. You can also include a applies to Kermit's Telnet partner; if the second keyword is omitted, an for each direction; the first keyword applies to Kermit itself, the second Some options are negotiated in two directions and accept separate policies requested by the peer. requested. REFUSED instructs Kermit to refuse the option if it is in no offer but Kermit will attempt to negotiate the option if it is REQUESTED causes Kermit to offer an option to the peer. ACCEPTED results to offer the option to the peer and disconnect if the option is refused. Telnet option negotiations. Setting an option REQUIRED causes Kermit SET TELOPT lets you specify policy requirements for Kermit's handling of [ { ACCEPTED, REFUSED, REQUESTED, REQUIRED } ] { ACCEPTED, REFUSED, REQUESTED, REQUIRED } -SET TELOPT [ { /CLIENT, /SERVER } ]