; CPSREM.ASM ; KERMIT - (Celtic for "FREE") ; ; This is the CP/M-80 implementation of the Columbia University ; KERMIT file transfer protocol. ; ; Version 4.0 ; ; Copyright June 1981,1982,1983,1984 ; Columbia University ; ; Originally written by Bill Catchings of the Columbia University Center for ; Computing Activities, 612 W. 115th St., New York, NY 10025. ; ; Contributions by Frank da Cruz, Daphne Tzoar, Bernie Eiben, ; Bruce Tanner, Nick Bush, Greg Small, Kimmo Laaksonen, Jeff Damens, and many ; others. ; ; This file contains the (system-independent) routines that implement ; the REMOTE commands of the KERMIT protocol. ; ; revision history: ; ;edit 13, 21-Mar-1991 by MF. Renamed REMOTE SET FILE COLLISION REPLACE to ; REMOTE SET FILE COLLISION OVERWRITE and modified the corresponding ; help text slightly. ;edit 12, 13-Feb-1991 by MF. Simplified code at "remcl0" to get REMOTE ; command arguments by calling "cmgtch" in order to get command-line ; characters directly. This means that command-line characters are ; passed literally (except for prefixingand space-compression) to the ; remote Kermit and that one need not send "?" or as "\"-prefixed ; octal numbers in order to avoid immediate action by CP/M Kermit. ;edit 11, 30-Jan-1991 by MF. Corrected code to always require entry of at least ; one argument in the REMOTE COPY, REMOTE DELETE (REMOTE ERASE), ; REMOTE MESSAGE, REMOTE RENAME and REMOTE TYPE commands. This is ; done by branching to KERMT3 (the "not confirmed" code) if the ; first argument isn't given. This should correct a bug which occurred ; in numerous places in which the character immediately following ; that specifying the flavor of a Generic command was not defined if ; the first of multiple (at least two) arguments was left blank but ; subsequent arguments were not. This should correct a problem ; encountered by Russell Lang of Monash University In Australia when ; he did a REMOTE MESSAGE command with a blank first argument (the ; user id) and a nonblank second argument (the message text) from ; CP/M Kermit to Ms-Kermit in Server mode. ;edit 10, 14-Dec-1990 by MF. Put "<<>>" around "x" or "F" packet replies ; to REMOTE commands as in VMS Bliss Kermit and eliminate unnecessary ; instruction before label remc2d. ;edit 9, 1-Nov-1990 by MF. Changed REMOTE CWD to REMOTE CD in the quest for ; uniformity of nomenclature (per request of FDC). ;edit 8, 29-Oct-1990 by MF. Corrected Remote command code to properly ; prefix control characters (repeat prefix (~) isn't done in CP/M ; yet). ;edit 7, 17-Oct-1990 by MF. Changed verb "REMOTE SEND-MESSAGE" to ; "REMOTE MESSAGE" to conform with the nomenclature suggested in ; Chapter 10 of the 6th edition of the Kermit Protocol Manual. ;edit 6, 10-Oct-1990 by MF. Corrected Remote command code to ; properly prefix the control-character prefix character and the ; eighth-bit quotation prefix character. Remote Set commands ; now function correctly. ; Also change the REMOTE SET FILE COLLISION ASK value to 5 per ; Kermit Digest V12 #6 (though I still have no idea how the local ; Kermit is supposed to answer). ;edit 5, 5-Oct-1990 by MF. Coded many Remote Set commands. ; The commands I have omitted deal with Attribute packets which ; don't make much sense on a CP/M system. ; Note also that for those Remote Set commands which take a ; numeric argument, no range-checking is done here. ; Also note that, for now, REMOTE SET FILE-COLLISION ASK is ; equivalent to REMOTE SET FILE-COLLISION DISCARD because ; (a) that's what the Kermit Digest indicated and (b) no mechanism ; has been proposed for the Remote Kermit to query the Local Kermit. ;edit 4, 29-Sep-1990 by MF. Corrected code to ignore error packets in ; response to sending an "I" packet, per KPROTO.DOC ;edit 3, 9-Sep-1990 by MF. Extensively revised this file to implement ; Remote commands except for the following: ; REMOTE JOURNAL, REMOTE MAIL, REMOTE PRINT, REMOTE PROGRAM, ; REMOTE SET, REMOTE VARIABLE. ;edit 2 ... MF Dunno where edit 2 went (shown in Version string). ; edit 1: September 8th, 1987. Created this file from bits of the two packet files. ; The commands supported by this system are all the REMOTE commands, ; to allow users to acces remote host systems via Kermit. Added REMOTE ; command table and REMOTE DIR command. ; ; remver: db 'CPSREM.ASM (13) 21-Mar-1991$' ; name, edit number, date ; ; REMOTE command - quite similar to the SET command remote: call selmdm ;Select modem call flsmdm ;Flush buffers call selcon ;Back to keyboard lxi d,remtab ; remote commands table lxi h,remhlp ; remote help table call keycmd ; get result xchg pchl ; and do it ; REMOTE command table. Works the same way as every other table etc. ; remtab: db 19 ; nineteen commands so far db 2,'CD$' dw remcd ; remote cd command db 4,'COPY$' dw remcpy ; remote copy command db 6,'DELETE$' dw remdel ; remote delete command db 9,'DIRECTORY$' dw remdir ; remote directory command db 10,'DISK-USAGE$' dw remdsk ; remote disk-usage command db 5,'ERASE$' dw remdel ; remote erase command (same as delete) db 6,'FINISH$' dw finish ; same as finish db 4,'HELP$' dw remhep ; remote help command db 4,'HOST$' dw remhos ; remote host command db 6,'KERMIT$' dw remker ; remote Kermit command db 5,'LOGIN$' dw remlgi ; remote login db 6,'LOGOUT$' dw logout ; same as logout db 7,'MESSAGE$' dw remmsg ; remote message command db 6,'RENAME$' dw remren ; remote rename db 3,'SET$' dw remset ; remote set command db 5,'SPACE$' dw remdsk ; remote space command (same as disk-usage) db 6,'STATUS$' dw remsta ; remote status (of server) command db 4,'TYPE$' dw remtyp ; remote type command db 3,'WHO$' dw remwho ; remote who command remhlp: db cr,lf,'CD - change default directory for remote server' db ' operations' db cr,lf,'COPY - copy files on a remote system' db cr,lf,'DELETE - delete files on a remote system' db cr,lf,'DIRECTORY - list a directory on a remote system' db cr,lf,'DISK-USAGE - show disk usage on a remote system' db cr,lf,'FINISH - stop a remote server' db cr,lf,'HELP - get help from a remote server' db cr,lf,'HOST - execute a command on a remote system' db cr,lf,'KERMIT - tell a remote server to execute a Kermit ' db 'command' db cr,lf,'LOGIN - send user-identification to a remote server' db cr,lf,'LOGOUT - stop and logout a remote server' db cr,lf,'MESSAGE - send a message to a remote system user' db cr,lf,'RENAME - rename files on a remote system' db cr,lf,'SET - set remote server parameters' db cr,lf,'SPACE - show disk-usage on a remote system' db cr,lf,'STATUS - Get status of a remote server' db cr,lf,'TYPE - type files on a remote system' db cr,lf,'WHO - show current users on a remote system' db '$' ;Description of remote commands ; ; Packets start with an I packet in place of S/R packet. An X ; packet is the same as an F (filename) packet except the 'file' ; is not applicable. Copy X packet data field to display. Set ; options so that no data is written to disk during D packets. ; (REMTXT <> 0) ; ;Packets: ; we we comments ; send receive ; I ; ACK ; Command packet ; Ack or ; Init ; ACK ; X Dummy header. ; ACK ; D listing from remote end ; ACK We got it ; .... ; ACK last packet received ok ; Z ; ACK ; B ; ACK end of transaction. ; ;**Note** If the Remote system gives a simple ack to the command packet, ;that is, a "short reply" is given, the data, if any, in the packet ;is displayed and the transaction ends. The outline shown above is for a ;"long reply". ; ; Remote commands ; ; Remote Copy - Copy file(s) on remote system ; remcpy: lxi h,newfms ;Second argument prompt shld rprmpt ;... mvi a,'K' ;Generic type remcp0: sta remdat ;into packet mvi a,2 ;Packet has at least two characters sta rdl ;... mvi a,'G' ;Generic command sta rcom ;... lxi d,remdat+2 ;Point to data buffer call remcli ;Get filespec (if any) from command line ora a ;Anything typed? jz kermt3 ;No, we must have an argument mov b,a ;Save length adi space ;Yes, make encoded field length sta remdat+1 ;and store in packet data area lda rdl ;Get packet length so far add b ;Count answer length sta rdl ;and remember new packet size lhld rprmpt ;Point to "new file" prompt xchg ;... shld rptr ;Save data pointer call prompt ;Prompt the user lhld rptr ;Get data pointer again inx h ;Skip encoded field-length xchg ;... call remcli ;get user's answer lhld rptr ;Restore pointer mov c,a ;Save answer length adi space ;Convert to encoded field length mov m,a ;Put length in packet lda rdl ;Get accumulated data length add c ;plus data length adi 1 ;plus field length character sta rdl ;and remember it jmp remcom ;and branch to common code ; ; Remote Cd - Change Directory ; remcd: lxi h,pswdms ;Second argument prompt shld rprmpt ;... mvi a,'C' ;Generic cd remcd0: sta remdat ;into packet mvi a,1 ;Packet is at least one character long sta rdl ;... mvi a,'G' ;Generic command sta rcom ;... lxi d,remdat+2 ;Point to data buffer call remcli ;Get filespec (if any) from command line mov b,a ;Save answer length (may be zero) adi space ;Make encoded field length sta remdat+1 ;and store in packet data area lda rdl ;Get length so far add b ;Count answer length adi 1 ;and field length character sta rdl ;and remember current packet-size lda remdat ;Get generic packet flavor cpi 'C' ;Remote CD? jnz remcd1 ;No mov a,b ;Get length of possible directory spec ora a ;Did the user give a directory spec? jz remcom ;No, we can process the command immediately mvi a,0ffH ;Yes, password follows, make it not echo sta cmqflg ;... remcd1: lhld rprmpt ;Point to "password" prompt xchg ;... shld rptr ;Save data pointer mvi a,0ffH ;Allow blank password sta cmbflg ;... call prompt ;Prompt the user lhld rptr ;Restore data pointer xchg ;... inx d ;and increment it call remcli ;Get user's answer ora a ;Password given? jz remcom ;No, proceed with command mov c,a ;Yes, save answer length adi space ;Convert to encoded field length lhld rptr ;Get data pointer mov m,a ;Put length in packet lda rdl ;Get accumulated data length adi 1 ;Count encoded field length add c ;plus data length sta rdl ;and remember packet-size jmp remcom ;Branch to common code ; ; Remote Delete (Erase) command ; remdel: mvi a,'E' ;Delete (Erase) command remdl0: sta remdat ;... mvi a,1 ;At least one character in packet sta rdl ;... mvi a,'G' ;Generic command sta rcom ;... lxi d,remdat+2 ;Point to data field call remcli ;Get filespec mov b,a ;Save length lda remdat ;Get packet type cpi 'E' ;If Generic Delete jz remdl1 ;We must have an argument cpi 'T' ;Ditto for Generic Type jz remdl1 ;... mov a,b ;Else get back character count ora a ;Answer typed? jz remcom ;No, process packet as is remdl1: mov a,b ;Get character count again ora a ;Anything typed? jz kermt3 ;No, we must have an argument (Delete/Type) adi space ;Yes, encode field length sta remdat+1 ;and put in packet lda rdl ;Get packet length so far add b ;Count length of filespec adi 1 ;Count field length character sta rdl ;and store packet length jmp remcom ;and do our stuff ; ; Remote Directory command ; remdir: mvi a,'D' ;generic directory command jmp remdl0 ;Do common code ; ; Remote Disk-usage (Space) command ; remdsk: mvi a,'U' ;Disk-usage generic command jmp remdl0 ;Do common code ; ; Remote Help command ; remhep: mvi a,'H' ;generic help command jmp remdl0 ;Do common code ; ; Remote Host command ; remhos: mvi a,'C' ;Remote Host command remho0: sta rcom ;... xra a ;Zero packet length sta rdl ;... lxi d,remdat ;Point to packet data buffer call remcli ;Get host command ora a ;Anything typed? jz kermt3 ;No, don't let the user get away with this sta rdl ;Yes, store packet length jmp remcom ;and do the command ; ; Remote Kermit command ; remker: mvi a,'K' ;Remote Kermit command jmp remho0 ;Do common code ; ; Remote Login command ; remlgi: mvi a,'G' ;Generic command sta rcom ;... mvi a,'I' ;Generic type sta remdat ;into packet mvi a,1 ;At least one character in packet sta rdl ;... lxi d,remdat+2 ;Point to data buffer call remcli ;Get userid (if any) from command line ora a ;Userid typed? jz remcom ;No, nothing more to do mov b,a ;Yes, save length adi space ;Make encoded field length sta remdat+1 ;and store in packet data area lda rdl ;Get packet length add b ;Count id length adi 1 ;and field length character sta rdl ;and remember accumulated length xchg ;Save data pointer shld rptr ;... mvi a,0ffH ;Allow blank answers sta cmbflg ;... sta cmqflg ;Passwords don't echo lxi d,pswdms ;Point to "password" prompt call prompt ;Prompt the user lhld rptr ;Get data pointer xchg ;Put in DE inx d ;Skip encoded field-length call remcli ;Get password, if any ora a ;Anything typed? jz remcom ;No, do command immediately mov c,a ;Yes, save answer length adi space ;Convert to encoded field length lhld rptr ;Get pointer mov m,a ;Put length in packet lda rdl ;Get accumulated data length adi 1 ;Count encoded field length add c ;Count "password" field length sta rdl ;and remember new packet length xchg ;Save data pointer shld rptr ;... xra a ;Allow echoing again for "account" field sta cmqflg ;... lxi d,acctms ;Point to "account" prompt call prompt ;Prompt the user lhld rptr ;Get data pointer xchg ;into DE inx d ;Skip encoded field length call remcli ;Get "account" field, if any ora a ;Anything typed? jz remcom ;No, do the command now mov c,a ;Yes, save length of answer adi space ;Convert to encoded field length lhld rptr ;Get data pointer mov m,a ;Put length in packet lda rdl ;Get accumulated data length adi 1 ;Count encoded field length add c ;plus "account" length sta rdl ;and remember it jmp remcom ;Branch to common code ; ; Remote Rename command ; remren: lxi h,newfms ;Second argument prompt shld rprmpt ;... mvi a,'R' ;generic rename jmp remcp0 ;Do common code ; ; Remote Message command ; remmsg: lxi h,msgms ;Second argument prompt shld rprmpt ;... mvi a,'M' ;generic message jmp remcp0 ;Do common code ; ;Remote Set command ; remset: mvi a,6 ;Packet data area has at least six chars sta rdl ;... mvi a,'S' ;Remote Set command sta remdat ;... mvi a,'G' ;It's a generic command sta rcom ;... mvi a,'#' ;Encoded field-length for SET type sta remdat+1 ;which is three chars long lxi d,rmstab ;Point to Set command table lxi h,rmshlp ;and the help table call keycmd ;Find out which command is to be executed xchg ;Put dispatch address in HL pchl ;Go do the command ; ; Common code for Remote Set commands that take an argument ; remscm: lxi d,remdat+6 ;We get an argument from the user mvi a,cmtxt ;... call comnd ;... jmp kermt3 ;Couldn't get one. ora a ;Did the user give one? jz kermt3 ;a blank answer isn't acceptable mov c,a ;Save length of answer adi space ;Convert to encoded field-length sta remdat+5 ;and put in packet data area lda rdl ;Get current data length add c ;Count length of answer sta rdl ;and store new data length call cfmcmd ;Get a "confirm" jmp remcom ;Do common Remote command code ; ; Common code for Remote Set commands requiring another table lookup ; remsc1: call chkkey ;Get user's selection sta remdat+6 ;and put into the packet data area mvi a,'!' ;Encoded field length for 1 char sta remdat+5 ;Put in packet lda rdl ;Get accumulated packet data length adi 1 ;Count length of answer (1 char) sta rdl ;and store as new packet data length jmp remcom ;Go do common Remote command processing ; ; Remote Status (of server) command ; remsta: call cfmcmd ;Get return mvi a,'Q' ;Command type (Server Status) sta remdat ;... mvi a,'G' ;Generic Kermit command sta rcom ;... mvi a,1 ;1 character in packet sta rdl ;... jmp remcom ;Do common code ; ; Remote Type command ; remtyp: mvi a,'T' ;generic type command jmp remdl0 ;Do common code ; ; Remote Who command ; remwho: lxi h,optms ;Second argument prompt shld rprmpt ;... mvi a,'W' ;generic who jmp remcd0 ;Do common code ; Common code for Remote commands ; remcom: mvi a,0ffH ; Make sure returned info is sent sta remtxt ;to the user's screen rather than to a file lda rcom ;Get packet-type cpi 'G' ;Is it a generic command? jnz remc0e ;No, go clear the screen lda remdat ;Yes, get generic command type cpi 'S' ;Is it a Remote Set command? jz remc0f ;Yes, don't clear the screen remc0e: call clrtop ; clear the screen remc0f: xra a sta numtry ; reset retries sta czseen sta pktnum lxi h,0 shld numpkt shld numrtr ; clear some variables mvi a,'1' ; reset block check type sta curchk remcm0: mvi a,'I' ; init state sta state call sinit ; do sendinit with I packet (??) lda state ; now see if we are in the 'X' state cpi 'X' jz remco0 ;Yup, all is in order cpi 'A' ;No, in abort state? jnz remcm0 ;No, try I-packet again jmp kermit ;Yes, like Danny Boy, we must die. ;If we get this far, either the "I" packet ;was understood or the Server couldn't ;handle it and we ignored the error. ;In either case, we can proceed. remco0: xra a sta numtry ; reset retries sta czseen sta pktnum lxi h,0 shld numpkt shld numrtr ; clear some variables mvi a,'1' ;Make sure we use sta curchk ;1-character checksum lda rdl ;Get packet-length (number of bytes to copy) ora a ;Anything to copy? jz remcm1 ;No sta temp1 ;Yes, save loop counter lda spsiz ;Get max packet size sui 5 ;less overhead sta temp2 ;gives max chars we can send lxi d,remdat ;Copy from private buffer lxi h,data ;to packet data area lda qbchr ;Get eightgh-bit quoting prefix char mov b,a ;Save it lda squote ;Get control-char quoting char mov c,a ;and save it remc0a: lda temp2 ;Get characters to go in packet dcr a ;and decrement it sta temp2 ;... jm remc0x ;We can't copy any more ldax d ;Get a packet data character cpi space ;Is it a control char? jm remc0b ;Yes, quote it cmp c ;Is it the control-char prefix? jz remc0b ;Yes, quote it lda quot8 ;No, is eighth-bit quoting in effect? ora a ;... jz remc0c ;No, just copy the character ldax d ;Get character again cmp b ;Is it the eighth-bit quote char? jnz remc0d ;No, just copy it remc0b: mov m,c ;Yes, quote the character inx h ;Increment the dest. pointer lda temp2 ;Get chars to go dcr a ;Decrement sta temp2 ;... jm remc0x ;Can't copy any more lda rdl ;Count quote prefix inr a ;... sta rdl ;... remc0c: ldax d ;Get character again cpi space ;If not a control char, jp remc0d ;just copy the character, else adi 40H ;Convert to printing character ani 7fH ;modulo 128 remc0d: mov m,a ;Copy the character inx h ;Increment the pointers inx d ;... remc0x: lda temp1 ;Get loop counter dcr a ;and decrement it sta temp1 ;... jnz remc0a ;Copy entire packet data area ; remcm1: xra a sta argblk ; set packet no zero lda rdl ;Number of bytes in packet sta argblk+1 ;into argument block lda rcom ;Remote command call spack ;Send the packet jmp kermt3 ;Nogo, die! jmp remco2 ;Try to get an answer remco1: call nak0 ;Nak packet ; remco2: lda numtry ;Get number of retries inr a ; update retries cpi maxtry ;To many retries? jm remc2a ;No lxi d,erms28 ;Yes, complain call prtstr ;... jmp kermit ;and abort remc2a: sta numtry call rpack ;Get a packet jmp remco1 ;Couldn't get one. cpi 'E' ;Error packet? jnz remc2b ;No lda rcom ;What kind of packet did we send? cpi 'G' ;If it wasn't generic, jnz remc2f ;there is no need to start a new message line lda remdat ;Packet was generic cpi 'S' ;Was it a Remote Set? cz prcrlf ;Yes, start a new line since the screen ;isn't blank and we would clobber the command- ;line otherwise remc2f: call error0 ;Yes, inform the user jmp kermit ;and abort to main command loop remc2b: cpi 'S' ;Send-init? jnz remc2c ;No call rini2a ;Initialize parameters lda state ;Get state cpi 'A' ;If abort, jz kermit ;Go back to main command loop mvi a,'X' ;Set state to text-display sta state ;... jmp read2 ;Get more packets remc2c: cpi 'N' ;Nacked packet? jz remco2 ;Yes, try again sta state ;Save packet type call selcon ;Select Console lxi h,data ;Point to data lda argblk+1 ;Anything in packet data? ora a ;... jz remco6 ;No push h ;Yes, save pointer push psw ;and character count mvi e,'<' ;Type "<<" as in VMSKermit push d ;... call outcon ;... pop d ;... call outcon ;... pop psw ;Restore character counter pop h ;and data pointer remc2d: ora a ;... jz remc2e ;No more characters dcr a ;Decrement loop counter mov e,m ;Get character inx h ;Increment pointer push psw ;Save loop counter push h ;Save data pointer call outcon ;Type on Console pop h ;Restore pointer pop psw ;Restore loop counter jmp remc2d ;Type all packet data remc2e: mvi e,'>' ;Type ">>" as in VMSKermit push d ;... call outcon ;... pop d ;... call outcon ;... call prcrlf ;End the line remco6: lda state ;Get packet type again cpi 'Y' ;If simple ack, jz kermit ;Done, else call ackp ;Acknoledge the packet call countp ;Count the packet mvi a,'D' ;Set to data-receive sta state ;... jmp read2 ; do the same as read a file, but echo ; to the screen.. Dont close non-open files. ; ; ;REMCLI - Get command-line for Remote commands ; remcli: xra a ;Zero accumulated length sta rcl ;... mov b,a ;[12]... ; ;[MF][12]Eliminate following code which calls "comnd" in favor of code which ;[MF][12]calls "cmgtch" directly so that characters are sent without ;[MF][12]alteration or inadvertent action ("?" or ). The only thing ;[MF][12]lost is the ability to produce any ASCII character via ;[MF][12]octal numbers prefixed with "\" but this isn't used much in remote ;[MF][12]commands anyway. ; ;remcl0: mvi a,cmtxt ;We get arbitrary text ; call comnd ;from the command-line ; jmp kermt3 ;We couldn't get any. ; ora a ;Anything given? ; jz remcl1 ;No, done ; push b ;Save BC ; mov c,a ;Save length ; lda rcl ;Get accumulated length ; add c ;plus current word length ; adi 1 ;plus a space ; sta rcl ;and save accumulated length ; mvi a,space ;Put in a space separator ; stax d ;... ; inx d ;Increment pointer ; pop b ;Restore BC ; jmp remcl0 ;Get text to end-of-line ;remcl1: lda rcl ;Get accumulated length ; ora a ;Anything typed? ; rz ;No ; dcr a ;Yes, don't count final space ; push psw ;Save count ; dcx d ;Point to final space ; xra a ;Zap it ; stax d ;... ; pop psw ;Restore count ; ;[MF][12]Simplified code follows ; remcl0: call cmgtch ;[12]Get a character from the user ani 7fh ;[12]Turn off minus bit cpi cr ;[12]If end-of-line, jz remclx ;[12]We're done cpi lf ;[12]... jz remclx ;[12]... stax d ;[12]else store the character inr b ;[12]and count it inx d ;[12]Increment character buffer pointer cpi esc ;[12]is character an ? jz remcl2 ;[12]Yes cpi ff ;[12]an ? jz remcl1 ;[12]Yes, diddle command buffer pointer cpi '?' ;[12]a "?"? jnz remcl0 ;[12]No, just get more characters remcl1: push h ;[12]Protect HL lhld cmdptr ;[12]get "cmgtch"'s character pointer inx h ;[12]and reverse the action at "cmgtc4" ;[12]since we don't need a "confirm" and ;[12]infinite loops are beaucoup bad news shld cmdptr ;[12]... pop h ;[12]Restore HL remcl2: push psw ;[12]Save the character xra a ;[12]Zero the action flag so we get input sta cmaflg ;[12]to end-of-line without special action pop psw ;[12]Restore the character jmp remcl0 ;[12]Get more characters remclx: mov a,b ;[12]Get accumulated text length sta rcl ;[12]and remember it ; ret ;Return ; ;Remote set values ; ; REMOTE SET FILE TYPE 300 0 = TEXT, 1 = BINARY ; REMOTE SET FILE NAMES 301 0 = CONVERTED, 1 = LITERAL ; REMOTE SET FILE COLLISION 302 0 = RENAME, 1 = OVERWRITE, ; 2 = BACKUP, 3 = APPEND, ; 4 = DISCARD, 5 = ASK ; REMOTE SET FILE REPLACE 303 0 = PRESERVE, 1 = DEFAULT ; REMOTE SET FILE INCOMPLETE 310 0 = DISCARD, 1 = KEEP ; REMOTE SET INCOMPLETE (same as above) ; REMOTE SET BLOCK-CHECK 400 number (1, 2, or 3) ; REMOTE SET RECEIVE PACKET-LENGTH 401 number (10-9024) ; REMOTE SET RECEIVE TIMEOUT 402 number (any, 0 = no timeout) ; REMOTE SET RETRY 403 number (any, 0 = no limit) ; REMOTE SET SERVER TIMEOUT 404 number (any, 0 = no timeout) ;REMOTE SET FILE BLOCKSIZE 311 number ;REMOTE SET FILE RECORD-LENGTH 312 number ;REMOTE SET FILE RECORD-FORMAT 313 F (fixed), V (variable), etc... ;This is just for the record, to assign these numbers to these commands ;for somebody who needed them. Details to be filled in later. ; ;Remote Set command table ; rmstab: db 7 ;seven entries db 16,'BLOCK-CHECK-TYPE$' dw remsbc ;Remote Set Block Check db 4,'FILE$' dw remsfl ;Remote Set File db 10,'INCOMPLETE$' dw remsfi ;Remote Set (file) Incomplete db 7,'RECEIVE$' dw remsrc ;Remote Set Receive db 7,'REPLACE$' dw remsfr ;Remote Set (file) Replace db 5,'RETRY$' dw remsry ;Remote Set Retry db 14,'SERVER-TIMEOUT$' dw remsst ;Remote Set Server Timeout ; rmshlp: db cr,lf,'BLOCK-CHECK-TYPE for a remote server' db cr,lf,'FILE parameters for a remote server' db cr,lf,'INCOMPLETE file disposition for a remote server' db cr,lf,'RECEIVE parameters for a remote server' db cr,lf,'REPLACE file attribute handling for a remote server' db cr,lf,'RETRY maximum for a remote server' db cr,lf,'SERVER-TIMEOUT interval for a remote server' db '$' ; ;Remote Set File tables ; rsftab: db 8 ;eight entries db 10,'BLOCK-SIZE$' dw remsbs ;Remote Set File Block-size command db 9,'COLLISION$' dw remsfc ;Remote Set File Collision command db 10,'INCOMPLETE$' dw remsfi ;Remote Set File Incomplete command db 5,'NAMES$' dw remsfn ;Remote Set File Names command db 13,'RECORD-FORMAT$' dw remsrf ;Remote Set File Record-format db 13,'RECORD-LENGTH$' dw remsrl ;Remote Set File Record-length db 7,'REPLACE$' dw remsfr ;Remote Set File Replace command db 4,'TYPE$' dw remsft ;Remote Set File Type command ; rsfhlp: db cr,lf,'BLOCK-SIZE of files for a remote server' db cr,lf,'COLLISION action on filename conflicts for a remote' db ' server' db cr,lf,'INCOMPLETE file disposition for a remote server' db cr,lf,'NAMES translation of files for a remote server' db cr,lf,'RECORD-FORMAT of files for a remote server' db cr,lf,'RECORD-LENGTH for a remote server' db cr,lf,'REPLACE file attribute handling for a remote server' db cr,lf,'TYPE of files for a remote server' db '$' ; ;Remote Set File Record-format tables ; rcftab: db 2 ;two entries db 5,'FIXED$' db 'F','F' ;Remote Set File Record-format Fixed command db 8,'VARIABLE$' db 'V','V' ;Remote Set File Record-format Variable cmd ; rcfhlp: db cr,lf,'FIXED VARIABLE' db '$' ; ;Remote Set Receive tables ; rrctab: db 2 ;two entries db 13,'PACKET-LENGTH$' dw remrpl ;Remote Set Receive Packet-length command db 7,'TIMEOUT$' dw remsrt ;Remote Set Receive Timeout command ; rrchlp: db cr,lf,'PACKET-length TIMEOUT' db '$' ; ;Remote Set File-collision table ; rfctab: db 6 ;six entries db 6,'APPEND$' db '3','3' ;Set collision append db 3,'ASK$' db '5','5' ;Set collision ask db 6,'BACKUP$' db '2','2' ;Set collision backup db 7,'DISCARD$' db '4','4' ;Set collision discard db 9,'OVERWRITE$' db '1','1' ;Set collision overwrite db 6,'RENAME$' db '0','0' ;Set collision rename ; rfchlp: db cr,lf,'ASK about existing files on a remote system' db cr,lf,'APPEND to existing files on a remote system' db cr,lf,'BACKUP (rename) existing files on a remote system' db cr,lf,'DISCARD new versions of existing files on a' db ' remote system' db cr,lf,'OVERWRITE existing files on a remote system' db cr,lf,'RENAME new versions of existing files on a' db ' remote system' db '$' ; ;Remote Set File-Incomplete tables ; rfitab: db 2 ;2 entries db 7,'DISCARD$' db '0','0' ;Remote Set File Incomplete Discard db 4,'KEEP$' db '1','1' ;Remote Set File Incomplete Keep ; rfihlp: db cr,lf,'DISCARD KEEP' db '$' ; ;Remote Set File-Names tables ; rfntab: db 2 ;two entries db 9,'CONVERTED$' db '0','0' ;Remote Set File Names Converted db 7,'LITERAL$' db '1','1' ;Remote Set File Names Literal ; rfnhlp: db cr,lf,'CONVERTED LITERAL' db '$' ; ;Remote Set File Replace tables ; rfrtab: db 2 ;two entries db 8,'PRESERVE$' db '0','0' ;Remote Set File Replace Preserve db 7,'DEFAULT$' db '1','1' ;Remote Set File Replace Default ; rfrhlp: db cr,lf,'PRESERVE DEFAULT' db '$' ; ;Remote Set File Type tables ; rfttab: db 2 ;two entries db 6,'BINARY$' db '1','1' ;Remote Set File Type Binary db 4,'TEXT$' db '0','0' ;Remote Set File Type Text ; rfthlp: db cr,lf,'BINARY TEXT' db '$' ; ; Remote Set Block-check ; remsbc: IF lasm lxi h,'40' ;1st 2 chars of "400" ENDIF ;lasm IF NOT lasm lxi h,'04' ENDIF ;NOT lasm shld remdat+2 ;Store in correct order mvi a,'0' ;Put last char of type in buffer sta remdat+4 ;... lxi d,blktab ;Point to block-check table lxi h,blkhlp ;and help table jmp remsc1 ;Do common code ; ;Remote Set File command ; remsfl: lxi d,rsftab ;Point to Remote Set File tables lxi h,rsfhlp ;... remsf0: call keycmd ;Get user's selection xchg ;Put dispatch address in HL pchl ;and obey the user's most fervent desires ; ;Remote Set Receive command ; remsrc: lxi d,rrctab ;Point to the appropriate tables lxi h,rrchlp ;... jmp remsf0 ;and do command ; ;Remote Set Block-size command ; remsbs: IF lasm lxi h,'31' ;1st 2 chars of Set code ENDIF ;lasm IF NOT lasm lxi h,'13' ENDIF ;NOT lasm shld remdat+2 ;Store chars in correct order mvi a,'1' ;Put last char in buffer sta remdat+4 ;... jmp remscm ;and do common Remote Set code ; ;Remote Set File-collision command ; remsfc: IF lasm lxi h,'30' ;Put set type code in buffer ENDIF ;lasm IF NOT lasm lxi h,'03' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'2' ;... sta remdat+4 ;... lxi d,rfctab ;Point to tables lxi h,rfchlp ;... jmp remsc1 ;and do common code ; ;Remote Set File Incomplete command ; remsfi: IF lasm lxi h,'31' ;Establish command keyword code ENDIF ;lasm IF NOT lasm lxi h,'13' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'0' ;... sta remdat+4 ;... lxi d,rfitab ;Point to tables lxi h,rfihlp ;... jmp remsc1 ;and do common code ; ;Remote Set File-Names command ; remsfn: IF lasm lxi h,'30' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'03' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'1' ;... sta remdat+4 ;... lxi d,rfntab ;Point to the appropriate tables lxi h,rfnhlp ;... jmp remsc1 ;and do common code ; ;Remote Set File Record Format command ; remsrf: IF lasm lxi h,'31' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'13' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'3' ;... sta remdat+4 ;... lxi d,rcftab ;Point to proper tables lxi h,rcfhlp ;... jmp remsc1 ;and do common code ; ;Remote Set File Record Length command ; remsrl: IF lasm lxi h,'31' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'13' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'2' ;... sta remdat+4 ;... jmp remscm ;and do common code ; ;Remote Set File Replace command ; remsfr: IF lasm lxi h,'30' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'03' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'3' ;... sta remdat+4 ;... lxi d,rfrtab ;Point to tables lxi h,rfrhlp ;... jmp remsc1 ;and do common code ; ;Remote Set File Type command ; remsft: IF lasm lxi h,'30' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'03' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'0' ;... sta remdat+4 ;... lxi d,rfttab ;Point to tables lxi h,rfthlp ;... jmp remsc1 ;and go to common code ; ;Remote Set Receive Packet-length command ; remrpl: IF lasm lxi h,'40' ;Set command code ENDIF ;lasm IF NOT lasm lxi h,'04' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'1' ;... sta remdat+4 ;... jmp remscm ;and do common code ; ;Remote Set Receive Timeout command ; remsrt: IF lasm lxi h,'40' ;Set code ENDIF ;lasm IF NOT lasm lxi h,'04' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'2' ;... sta remdat+4 ;... jmp remscm ;and do common code ; ;Remote Set Retry command ; remsry: IF lasm lxi h,'40' ;Set code ENDIF ;lasm IF NOT lasm lxi h,'04' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'3' ;... sta remdat+4 ;... jmp remscm ;Go to common code ; ;Remote Set Server Timeout command ; remsst: IF lasm lxi h,'40' ;Set code ENDIF ;lasm IF NOT lasm lxi h,'04' ENDIF ;NOT lasm shld remdat+2 ;... mvi a,'4' ;... sta remdat+4 ;... jmp remscm ;Do common code ; Little code to allow some expansion of code without changing ; every futher address, only up to the end of this file. ; TO BE REMOVED FOR RELEASE ; ORG ($+100H) AND 0FF00H IF lasm LINK CPSSER ENDIF ;lasm