TI-PRO KERMIT version 2.28 revision 5 emulates a H19 terminal (VT52 mode). How to use KERMIT with an TI internal 300-baud modem Make sure you have KERMIT.EXE and COMMAND.COM on your A: floppy. Enter "KERMIT" to start the program. Then tell KERMIT that you want to use the modem, which is in port 3, at 300 baud. Use the CONNECT command to start talking to the modem. To do auto-dialing, type in the letter capital "T", then the phone number, and end with a capital "X". The letters you type in will not be echoed. Do not hit the RETURN key. The modem will type "E", the phone number, and then "F". It will type "R" when the phone starts ringing at the computer. Wait a few seconds, then hit the RETURN key 2 or 3 times. A>KERMIT KERMIT-MS>SET PORT 3 KERMIT-MS>SET BAUD 300 KERMIT-MS>CONNECT T279-0550X KERMIT will be emulating an H19(VT52) terminal. To get out of KERMIT and go back to MS-DOS, hold the CTRL key, press "]", release CTRL, press "C". Then type EXIT.