IBM Books

Quick Beginnings for DB2 Extended Enterprise Edition for UNIX


Installing on Other UNIX Systems

To install the DB2 Client Application Enabler on SINIX, SCO OpenServer or Silicon Graphics IRIX, perform the following steps:

  1. Install the DB2 products. This includes mounting the DB2 Client Application Enablers CD-ROM.

  2. Update the kernel configuration parameters.

  3. Create or assign groups and users.

  4. Create an instance of the product.

You can also set the DB2 operating environment and optionally create links for DB2 files.

Installing on a SINIX System

On the CD-ROM, the installation image for the DB2 Client Application Enabler for SINIX is available in the /cdrom/db2/sinix/IBMdb2directory. To install the DB2 products, you must use the pkgadd command.

Install the DB2 products as follows:

  1. Log in as root.

  2. Insert the DB2 Client Application Enablers CD-ROM into the drive.

  3. Mount the CD-ROM using either the sysadm or the mount command as follows:
       mkdir /cdrom
       mount -F hs /dev/ios0/sdisk006s0 /cdrom 
    

    where /cdrom is the CD-ROM mount directory.

    The install images for DB2 for SINIX products are available in the /cdrom/db2/sinix/IBMdb2 directory.

  4. Install the DB2 Client Application Enabler. Type the following command:
       pkgadd -d /cdrom/db2/sinix/IBMdb2 db2cliv21 db2msgDe db2conv
    

Some kernel configuration parameters must be changed to use DB2 Client Application Enabler for SINIX. Use the SINIX idtune command to update the values as given in Table 11. After doing so, rebuild the SINIX kernel and reboot the system for the changes to take effect.

The following are the minimum recommended values:

Table 11. SINIX Kernel Configuration Parameters (Recommended Values)
SINIX RM600 Kernel Parameter Recommended Value
MSGMAX
MSGMNB
MSGSEG
MSGSSZ

65535
65535
8192
16

Note:The kernel configuration parameters MSGMNB and MSGMAX must be changed to 65535.


note

Go to "Create or Assign Groups and Users".

Installing on an SCO OpenServer System

Install the DB2 products as follows:

  1. Log in as root.

  2. Insert the DB2 Client Application Enablers CD-ROM into the drive.

  3. Mount the CD-ROM. For example, to mount the CD-ROM as /cdrom, type:
       mkdir /cdrom
       mount /dev/cd0 /cdrom
    

    Install images for DB2 products are available in the /cdrom/db2/sco/IBMdb2 directory.

  4. Issue the custom command. The Software Manager window opens.

  5. From the Software Manager window, do the following:

    1. From the Software pulldown menu, select Install New.

    2. If you are doing a remote install, select the host from which you want to install. Otherwise, select Continue.

    3. From the Media Device menu, select Media Images and select Continue.

    4. In the Image Directory field, enter:
         /cdrom/db2/sco/IBMdb2
      

    5. Choose the software you want to install:

      • To install all components, select Full.

      • To install selected components, choose Partial. On the Software Selection window, highlight the products you want to install:

        • DB2 Client Application Enabler for SCO OpenServer

        • DB2 Product Messages for SCO OpenServer.

  6. Update the kernel configuration parameters.

    Change the values as given in the table that follows by updating the /etc/conf/cf.d/stune file. Then, rebuild the kernel and reboot the system for the changes to take effect.


Table 12. SCO OpenServer Kernel Configuration Parameters (Recommended Values)
Kernel Parameter Recommended Value
MSGSSZ
SEMMAP
SEMMNI
SEMMNS
SEMMNU

64
100
100
100
100



note

Go to "Create or Assign Groups and Users".

Installing on a Silicon Graphics IRIX System

On the CD-ROM, the installation image for Silicon Graphics IRIX products is contained in the /cdrom/db2/sgi/IBMdb2 directory.

Install the DB2 software as follows:

  1. Log in as root.

  2. Insert the DB2 Client Application Enablers CD-ROM into the drive.

  3. Mount the CD-ROM using the mount command as follows:
       mount -t iso9660 device mount_point
    

    For example, to mount the CD-ROM as /cdrom, enter the following commands:

       mkdir /cdrom
       mount -t iso9660  /dev/scsi/sc0d7l0 /cdrom
    

  4. Install the DB2 Client Application Enabler. Issue the following command:
        pkgadd -d /cdrom/db2/sgi/IBMdb2 db2cliv21 db2conv
    


note

Go to "Create or Assign Groups and Users".


[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]

[ DB2 List of Books | Search the DB2 Books ]